MTProtoBot

KO | EN

gitlite — search

#ai #typescript #llm #golang #go #android #machine-learning #rust #linux #macos #windows #awesome #cli #vue

(★ 11)

This bot sends you MTProto proxies for Telegram up to 20 at once! Proxies are being updated frequently.

MTProtoBot 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

<h1 align="center">
    <img align='left' src="https://github.com/Kourva/MTProtoBot/assets/118578799/8abb7f24-2547-4e6f-a119-86419fa92342" width=200 height=200/>
    <h2>MTProto Telegram Bot </h2>
  <p><b>Get frequently updated MTProto proxies from bot up to 20 at once!</b></p>
  <p><i>Also see information about each proxy which bot sends to you</i></p>
</h1>
<br><br>

# ▋Features
This bot can send from 5 - 20 proxies based on proxy index. [5, 10, 15, 20]
+ **/mtp** command to show proxy menu.

<br>

# ▋Clone Repository
To get started, first you need to **clone** this repository from github into your machine:
```bash
git clone https://github.com/Kourva/MTProtoBot
```
and if you dont have git you can install it from your package manager!

<br>

# ▋Install Requirements
Then you have to install requirements before running bot
1. Navigate to bot directory
2. Install requirements using pip
```bash
cd MTProtoBot
```
```bash
pip install -r requirements.txt
```
This will install **pyTelegamBotAPI** and **Requests** for you

<br>

# ▋Config your token
Now you have to get create bot from [BotFather](https://t.me/BotFather) **(If you don't have)** and take your **Token** to starts working with your bot.<br>
After getting **Token** from **BotFather** replace the Token in `utils.py` in line **10** as follows:
```python
# Bot token to use
Token = "6146793572:AAE7fbH29UPOKzlHlp0YDr9o06o_NdD4DBk"
```
> This is just an example Token. Use yours instead

<br>

# ▋Launch the bot
Now you are ready to launch your bot in polling mode inside your terminal using python
```bash
python main.py
```
You can also use **proxychains** to run your bot via **Tor** proxy
```bash
proxycahins python main.py
```
Or in quiet mode
```bash
proxychains -q python main.py
```
To install proxychains install `proxychains-ng` and then edit the config file in `/etc/proxychains.conf`.<br>
In config file comment the `strict_chain` and un-comment `dynamic_chain` and its ready to use.
<br>

# ▋TOR new IP address
If you got any denied requests that blocked your Ip address, you can renew your IP
```bash
sudo killall -HUP tor
```

<br>

# ▋Thanks
Give me a start if you made this bot helpful

MTProtoBot

MTProtoBot 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

MTProtoBot

MTProtoBot 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README