puck.js

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 15)

Modules and examples for Puck.js (http://www.espruino.com/Puck.js)

puck.js 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Puck.js Modules and Examples

A set of pretty APIs for some features of [Puck.js](https://www.puck-js.com/).

**Modules:**
* [:radio_button: Button](#radio_button-button)
* [:bulb: Lights](#bulb-lights-wip)
* [:wave: Proximity](#wave-proximity)
* [:arrows_counterclockwise: Scroll Wheel](#arrows_counterclockwise-scroll-wheel)

**Examples:**
* [:sound: Volume/Play/Pause](#sound-volumeplaypause)

## Modules

### :radio_button: Button
```javascript
Button.on("double", ()=>console.log("I got double clicked!"));
```

Emits events for button presses:
* `up`, `down` - for push and release
* `press` - single presses
* `long` - long press
* `double` - double press
* `multi` - multi-press sequence, passing an argument with the number of presses

### :bulb: Lights [WIP]
```javascript
Lights.pulsing().color(Lights.BLUE).when(Button, "down").until(Button, "up");
Lights.blip(Lights.CYAN, 500);
```

Simple API for controlling the LEDs.
(Currently WIP - started hitting performance limits of the board, so optimizations underway, but generally works.)

Each call adds a _program_ to a stack. For example, the following will result in a steady red color for five seconds, with a blue light blinking at the same time.

```javascript
Lights.steady().color(Lights.RED).for(5000).now();
Lights.blinking().color(Lights.BLUE).for(5000).now();
```

Each program must have a brightness, color, start, and end function.

#### Shorthand function
* `blip(color,duration)`: same as `Lights.steady().color(color).now().for(duration)`

#### Brightness functions
* `steady()`: constant 100% brightness
* `pulsing(speed, lower_bound)`: sinusoidal pulsing effect, with a adjustable speed (default 1s per cycle) and lower bound (default 0%)
* `blinking(speed, lower_bound)`: simple blinking (_high-low-high-low..._) effect, with a adjustable speed (default 1s per cycle) and lower bound (default 0%)
  
#### Color function
* `color(clr)`: single color, as an array of `[R, G, B]` as values from `<0,1>`, or constants defined on `Lights` (`BLACK`, `RED`, `GREEN`, `BLUE`, `CYAN`, `MAGENTA`, `YELLOW`)
  
##### More color functions

More functions are available in a separate `LightsExtra` module.

```javascript
var Lights = require("https://raw.githubusercontent.com/rsmeral/puck.js/master/modules/Lights.js")();
require("https://raw.githubusercontent.com/rsmeral/puck.js/master/modules/LightsExtra.js")(Lights);

Lights.steady().rainbow(0.5).now().for(5000);
```

* `rainbow(speed)`: cycle through the color spectrum, with a adjustable speed (default 1s per cycle)
* `pearly(axis,transition)`: (Experimental) Emulates a pearlescent effect by changing colors based on device rotation
  
#### Start functions
* `now()`: start immediately
* `after(ms)`: start after given number of milliseconds
* `when(object,event)`: triggered by the given event (string) emitted by the given object

#### End functions 
* `for(ms)`: stop after given number of milliseconds
* `until(object,event)`: stops when the given event (string) is emitted by the given object

### :wave: Proximity
```javascript
Prox.on("near", ()=>console.log("Light suddenly obstructed - some object most likely got close to me."));
Prox.on("far", ()=>console.log("Ahh, light back on - obstruction removed."));
```

Emulates a proximity sensor by using the light sensor. Continuously adapts to lighting conditions.
(Obvious caveat - doesn't work well in dimly lit environments).

Emits two events:
* `near` - when an object approaches
* `far` - when an object moves away

### :arrows_counterclockwise: Scroll Wheel
```javascript
Knob.on("plus", ()=>hid.volumeUp());
Knob.on("minus", ()=>hid.volumeDown());
Knob.start();
```

Emulates an incremental rotary encoder (scroll wheel) using magnetometer readings.
The number of notches per circle is configurable. Works horizontally and vertically (or in any other plane).

**Needs calibration** - during 4 seconds after calling `start()`, rotate the Puck 360 degrees in a single plane to make at least one full circle.
If Puck is moved after calibration, it will most likely need re-calibration (`stop();start()`).

Emits events when Puck is rotated:
* `plus` - clockwise
* `minus` - counterclockwise
* `notch` - both directions, passing an argument with the number of the current notch (for detecting absolute rotation - like compass).

Also emits an event when calibration finishes:
* `calibrated`

## Examples

### :sound: Volume/Play/Pause

Rotating the Puck like a knob changes volume, pressing the button issues a Play/Pause event. Works on Mac, Linux, Android.

Demonstrates four modules: Button, Lights, Proximity, Scroll Wheel. After uploading, rotation needs to be calibrated, see [Scroll Wheel](#arrows_counterclockwise-scroll-wheel).

The experimental `POWER_SAVE` switch, if enabled, stops the rotation detection (which consumes battery) if your hand is not near the Puck, and starts it up again when Puck is mostly covered by a hand. 
In power-save mode, consumption should be very low - only 2 light sensor readings per second as opposed to 10 magnetometer reading and processing cycles.

puck.js

puck.js 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

puck.js

puck.js 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README