myicomfort

KO | EN

gitlite — search

#python #hacktoberfest #go #golang #android #machine-learning #rust #docker #nodejs #java #windows #cli #awesome-list #ios

(★ 10)

API Wrapper for myicomfort.com

myicomfort 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# PyPI - myicomfort
### API Wrapper for www.myicomfort.com

By Jacob Southard (https://github.com/thevoltagesource)  
Based on the work of Jerome Avondo (https://github.com/ut666)

Read and adjust your Lennox iComfort WiFi thermostat thru the Lennox cloud API
at www.myicomfort.com. You must have an existing myicomfort account and
have your iComfort WiFi thermostat configured to work with the cloud service.
If you can control your thermostat from your iPhone or Android you are ready to
use this wrapper.

Support has been added for AirEase thermostats.  AirEase is in the Lennox
family and the interaction is the same, just with a different URL
(www.mycomfortsync.com). A parameter has been added to the class to select the
AirEase Cloud API instead of the Lennox Cloud API.

This was created primarly to provide an API for use with
https://www.home-assistant.io/ but should work on any project you have in mind.
For those using this in your own project, there is a get_json() method which 
returns the current status of the thermostat in JSON format.

##### Class:  
myicomfort.api.Tstat (username, password, system, zone, svc, units)

* username: your myicomfort account username
* password: your myicomfort account password
* system: Zero-based index of systems in your myicomfort account (default = 0)
* zone: Zero-based index of zones for selected system (default = 0)
* svc: String value to select 'lennox' or 'airease' API (default = 'lennox')
* units: F = 0, C = 1, Use thermostat setting = 9 (default = 9)

##### Example:
```python
from myicomfort.api import Tstat

t = Tstat('username', 'password', 0, 0, 'lennox', 0)
t.current_temperature
t.set_points((68, 75))
t.pull_status()
t.get_json()
```

##### Notes:
* This API currently only supports manual mode (no programs) on the thermostat.

##### Cloud API Response Notes:
* Pref_Temp_Units: [0='F', 1='C']
* Operation_Mode: [0='Off', 1='Heat only', 2='Cool only', 3='Heat & Cool', 4='Emergency Heat']
* Fan_Mode: [0='Auto', 1='On', 2='Circulate']
* System_Status: [0='Idle', 1='Heating', 2='Cooling', 3='System Waiting']

##### Ideas/Future:
* Support thermostat programs
* Set Away temps - Research if possible through cloud API
* Support other states - dehumidify

myicomfort

myicomfort 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

myicomfort

myicomfort 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README