Adafruit_Python_WS2801

KO | EN

gitlite — search

#python #llm #go #android #deep-learning #docker #nodejs #java #windows #awesome #cli #awesome-list #security #openai

Adafruit_Python_WS2801

(★ 41)

Python code to control WS2801 and similar SPI interface addressable RGB LED strips on a Raspberry Pi & BeagleBone Black.

Adafruit_Python_WS2801 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Adafruit Python WS2801 (DEPRECATED)

This library has been archived and replaced by a new library that is Python 3 compatible and works with a wide range of Linux/hardware

https://github.com/adafruit/Adafruit_CircuitPython_WS2801

This library is no longer supported. Please use the new library

## Adafruit Python WS2801
Python code to control WS2801 and similar SPI interface addressable RGB LED strips on a Raspberry Pi &amp; BeagleBone Black.

## Installation

To install the library from source (recommended) run the following commands on a Raspberry Pi or other Debian-based OS system:

sudo apt-get install git build-essential python-dev
    cd ~
    git clone https://github.com/adafruit/Adafruit_Python_WS2801.git
    cd Adafruit_Python_WS2801
    sudo python setup.py install

Alternatively you can install from pip with:

sudo pip install adafruit-ws2801

Note that the pip install method **won't** install the example code.

## Pin numbering

The library (and the sample code) use the Broadcom BCM GPIO pin numbering scheme, rather than the physical pin numbering scheme. The [Adafruit T-Cobbler breakout board](https://www.adafruit.com/products/1754), for example, uses the BCM scheme. See [https://pinout.xyz](https://pinout.xyz/) for a quick-reference image.

Adafruit_Python_WS2801

Adafruit_Python_WS2801 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Adafruit_Python_WS2801

Adafruit_Python_WS2801 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README