ESP32_Serial_Port_Examples

KO | EN

gitlite — search

#javascript #ai #rust #docker #nodejs #java #windows #awesome #cli #kubernetes #awesome-list #pytorch #openai #open-source

ESP32_Serial_Port_Examples

(★ 20)

Examples setting up and using the serial ports

ESP32_Serial_Port_Examples 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# ESP32_Serial_Port_Examples
Examples setting up and using the serial ports

The example 'ESP32_Serial_Loopback_Example.ino' is a simple loop back test where the ESP32 sends data to itself from Port-1, where it is received on Port-2 and then displayed on the serial monitor port.

The example 'ESP32_Serial_Port_Example.ino' is a dual sender and receiver code example, using a single ESP32, you an send and receive data using the same (one) ESP32 relying on the internal ESP32 UART data buffers to make this a simple exercise to conduct, define the pins as required in your test application.

The example 'ESP32_Serial_Sender_Example.ino' sends a constant value to its serial port, define the pins as required in your application.

The example 'ESP32_Serial_Receiver_Example.ino' receives data as floating points on its serial port, define the pins as required in your application.

REMEMBER: you must cross-connect Txd on (ESP32-1) to Rxd on (ESP32-2) and Rxd (ESP32-1) to Txd on (ESP32-2)

You can use any pin that can be an Output for a Txd pin (0-27) and any pin that can be an Input for Rxd (0-39)

ESP32_Serial_Port_Examples

ESP32_Serial_Port_Examples 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

ESP32_Serial_Port_Examples

ESP32_Serial_Port_Examples 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README