chiASM

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 27)

an extension for PHP adding inline Assembly support

chiASM 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Synopsis

An extension for PHP adding inline Assembly support.

The sources are hosted on [GitHub](https://github.com/rinusser/chiASM).

# What the..?

Seriously. This extension for PHP adds an asm() function that will assemble, link and run Assembly code from within a
PHP script.

What for, you ask? Well I'm glad you did! Here's a list of good reasons to use this feature:

* uhh..

(end of list)

Actually I was writing another piece of Assembly code ([chASM](https://github.com/rinusser/chASM), just about as
practical as this) and the idea of adding inline Assembly to PHP came up repeatedly. The thought made me laugh, so
eventually I gave in and just implemented it.

You won't get any performance benefit from small chunks of Assembly code (quite the opposite, actually) because the
overhead is significant: this extension uses just-in-time assembly.

For the record, I haven't seen the words "just-in-time assembly" used anywhere in 20+ years of software development.
If the phrase is up for grabs I'm calling dibs.

# Requirements

* a 64-bit x86 processor (physical or virtual)
* a 64-bit operating system using the System V calling convention, e.g. Linux (tested with Ubuntu 17.04)
* a 64-bit version of PHP 7 (tested with 7.0.18)
* NASM (tested with 2.12.02)
* build tools for PHP

# Installation

You can either compile this as a *static* extension into new `php` binaries, or compile it as a *shared* extension that
can be loaded with the `extension=<file>` directive in PHP's .ini files.

## Static Extension

### Prerequisites

You'll need to extract the PHP sources somewhere, e.g. /usr/src/php7/. All paths in the installation instructions below
are relative to this sources root.

It's recommended you successfully build the PHP sources before adding this extension. This will make any troubleshooting
faster and easier.

You need to copy this code into a new directory, ext/chiasm/.

### Building

You'll need to tell PHP to look for and include the new extension:

$ buildconf -force
    $ ./configure --enable-chiasm

If `configure` reports that the `--enable-chiasm` parameter is invalid then you might not have extracted the extension
to ext/chiasm/. Once `configure` works you won't have to run `buildconf` again (unless you e.g. rename the extension).

You can now build PHP with the new module.

$ make

If you haven't built this PHP version before this might take a few minutes, otherwise it should finish quickly.
Once `make` is done the new binaries are ready.

### Verification

You can run the .phpt tests (`make test TESTS=ext/chiasm`, see "Tests" below) to make sure everything works as expected.
There's a small demonstration script, you can run it with:

$ sapi/cli/php -f ext/chiasm/demo.php

As of writing this it should output this:

result should be true: true
    out1 should be 5<<3-6=34: 34
    out2 should be 0.5*0.5=0.25: 0.25
    out3 should be false: false

Check out demo.php for how this is done.

## Shared Extension

Please consider carefully whether you really want to do this. If you go this route on e.g. a web server the served PHP
code gets access to the inline Assembly function.

### Prerequisites

You'll need:

* PHP and the `phpize` tool installed, e.g. `phpize --help` should output its usage information
* root/sudo access to install the new module globally
* this extension's sources somewhere, the following commands are executed in that directory

### Building/Installing

Run these commands:

$ phpize && ./configure && make

This should show a bit of output without any error messages, the end should say something like:

Build complete.
    Don't forget to run 'make test'.

The tests won't work yet, you still need to first install the module:

$ sudo make install

and then include it by adding this line somewhere in the .ini file(s):

extension=chiasm.so

The exact method of doing this depends on the OS, for example on Ubuntu 17.04 there's a /etc/php/7.0/cli/conf.d/
directory that contains individual .ini files to add/configure modules for the CLI version of PHP. In there create a new
file, chiasm.ini, and add the above line.

### Verification

After that the extension should be loaded and you can run the tests with:

$ make tests

This should report all tests passed.

If you added the extension to a web server (and you're really, really sure that's what you want), you may have to
restart the web server before the module is available.

The demo script should work too - currently it should output this:

$ php -f demo.php
    result should be true: true
    out1 should be 5<<3-6=34: 34
    out2 should be 0.5*0.5=0.25: 0.25
    out3 should be false: false

# Usage

### Basics

If the extension is loaded there's a new PHP function `asm`:

mixed asm(string $code, ?array $inputs=NULL, ?array $outputs=NULL)

`$code` is the Assembly code to execute, in Intel syntax (NASM is used to assemble it).

`$inputs` is an optional array of input variables. They're passed by value or by reference into the Assembly code.
For example:

$in1=1;
    $in2=2;

asm("mov r8,[rax]    ;copy $in1's value into r8
         mov r9,[rax+8]  ;copy $in1's type into r9
         mov r10,rbx     ;copy $in2's value into r10",
        [&$in1,$in2]);   //pass $in1 by reference, $in2 by value

Note that booleans and NULLs are differentiated in a ZVAL's type field, so they need to be passed as references.

`$outputs` is an optional array of output variables. They're passed by reference into the Assembly code.

Some internal errors will make asm() return a string with the error message.

### Inputs/Outputs

Variables, regardless of whether they're by value or by reference, are passed in these 13 GPRs:

rax, rbx, rcx, rdx, rbp, r8, r9, r10, r11, r12, r13, r14, r15

These registers are used left to right for input variables (rax is the first input, rbx the second and so on) and right
to left for output variables (r15 being the first output, r14 the second and so on). If more than 13 inputs and outputs
total are passed to the asm() function it will error out.

The other 3 GPRs (rsp, rsi and rdi) have special meanings:

`rsi` points to the return value ZVAL.

`rdi` points to the zend\_execute\_data context.

`rsp` needs to be preserved, previous register values are saved/restored on the stack.

### Volatile Registers

The asm() function will check your Assembly code for all used GPRs. This list of GPRs, in addition to all input and
output GPRs will be pushed to the stack before your code, and popped from the stack after your code.

Currently no other registers are preserved.

Implicitly modified GPRs will not be detected, for example the `CPUID` instruction changes the rax-rdx registers by
design. If you call such a function you'll have to manually mark those registers as volatile by including them in your
inline assembly code somewhere. If you aren't already using those registers anyway (in which case they're already
recognized as volatile) you can just add a comment line that lists the remaining registers.

### Stack Alignment

The generated assembly preamble will automatically align the stack to 128 bits. The first line of inline assembly code
can assume that `rsp%16 == 0`. For example it's perfectly valid to have the first code line perform a 128bit-aligned
AVX move like `MOVDQA`.

The generated assembly trailer will undo the automatic alignment, i.e. the inline assembly code should leave rsp the way
it found it.

### Example

The code:

<?php
    $code=<<<EOS
      mov qword [rsi+8],3   ;set return type to true
    EOS;
    var_dump(asm($code));

will output:

bool(true)

# Tests

This extension contains .phpt tests. How to execute them depends on whether you built a shared or static extension, see
Installation above.

All tests should pass.

# Legal

### Disclaimer

Do not use this PHP extension in production or another environment where user input, transmitted files or any other
kind of data not 100% under the developer's control finds its way to the asm() function.

Abusing this extension can crash PHP, your web server, be used as an attack vector in privilege escalations, compromise
your network, crash your entire system and potentially physically damage your hardware.

USE AT YOUR OWN RISK!

### Copyright

### License

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.

chiASM

chiASM 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

chiASM

chiASM 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README