web3-storage

KO | EN

gitlite — search

#javascript #react #ai #typescript #android #rust #docker #macos #java #cli #kubernetes #pytorch #openai #open-source

(★ 12)

Creating a prototype for Capacity (Web3 Storage)

web3-storage 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Scalable Web3 Storage

> [!WARNING]
> This is a prototype/proof-of-concept. It has **not been audited**, is under active development, and is not production-ready. Use at your own risk.

A decentralized storage system built on Substrate with game-theoretic guarantees. Storage providers lock stake and face slashing for data loss, while the chain acts as a credible threat rather than the hot path.

[![License: GPL-3.0-only](https://img.shields.io/badge/License-GPL--3.0--only-blue.svg)](https://raw.githubusercontent.com/paritytech/web3-storage/dev/LICENSE-GPL3)
[![License: Apache-2.0](https://img.shields.io/badge/License-Apache--2.0-blue.svg)](https://raw.githubusercontent.com/paritytech/web3-storage/dev/LICENSE-APACHE2)
[![Security: unaudited](https://img.shields.io/badge/security-unaudited-red.svg)](https://github.com/paritytech/web3-storage/security)
[![Status: prototype](https://img.shields.io/badge/status-experimental-yellow.svg)](https://raw.githubusercontent.com/paritytech/web3-storage/dev/)
[![Substrate](https://img.shields.io/badge/built%20with-Substrate-green.svg)](https://raw.githubusercontent.com/paritytech/web3-storage/dev/)

## What It Does

- **Storage providers** register with stake and offer storage services
- **Clients** create buckets and upload data off-chain
- **Storage agreements** bind providers to store data for agreed durations
- **Challenges** enforce accountability through slashing

Normal operations (reads, writes) happen off-chain. The chain is only touched for setup, checkpoints, and disputes.

## Quick Start

Get running in 5 minutes:

```bash
# Install just (command runner)
cargo install just

# One-time setup: downloads binaries + builds everything
just setup

# Start blockchain network + provider node
just start-chain     # Terminal 1
just start-provider  # Terminal 2

# Terminal 2:
# Setup (register provider, create bucket, establish agreement)
# Upload test data + challenge
just demo
```

**That's it!** Your local network is running with a provider ready to accept data.

### What Just Did

- Downloaded: `polkadot`, `polkadot-omni-node`, `zombienet`, `chain-spec-builder`
- Built: runtime, pallet, provider node, client SDK
- Started: Relay chain (2 validators) + Parachain (1 collator) + Provider node

### Next Steps

1. **`just demo`** drives the full Layer-0 happy path against an already-running
   chain + provider: registers a provider, creates a bucket, opens an agreement,
   uploads data, fires two challenges, and asserts the provider defends both.
   This is also what CI runs. It does **not** start the chain or provider for
   you — keep `just start-chain` and `just start-provider` running in two other
   terminals first.

2. **Inspect chain health**: `bash scripts/check-chain.sh` (relay + parachain
   status), `just health` (provider node health), `just stats` (provider stats).

3. **Build something on top**: see [Client Documentation](./clients/storage/README.md)
   for the Layer-0 SDK, or [`FILE_SYSTEM_QUICKSTART.md`](./docs/getting-started/FILE_SYSTEM_QUICKSTART.md)
   for the Layer-1 file-system interface.

## File System Interface (Layer 1)

> [!NOTE]
> **Layer 1 design is under triage.** Its design/implementation notes have been
> split into a draft — [`docs/drafts/L1_design_implementation.md`](./docs/drafts/L1_design_implementation.md) —
> pending a decision on the layered architecture (what belongs on-chain vs.
> provider-only). See [#51](https://github.com/paritytech/web3-storage/issues/51).

The Layer 1 File System Interface provides a familiar file/folder abstraction
over Layer 0's raw blob storage.

### Quick Start with File System

```bash
# In separate terminals:
just start-chain            # Terminal 1: relay + parachain
just start-provider         # Terminal 2: provider node

# Then run the file-system integration example:
just fs-demo-ci             # Terminal 3
```

**What you get:**
- ✅ Familiar file/folder interface
- ✅ Automatic provider selection
- ✅ Built-in blockchain integration

### File System Commands

```bash
just fs-test-all            # Run all unit tests across primitives, pallet, client
just fs-demo-ci             # Integration example against a running chain + provider
```

**Complete guide**: [FILE_SYSTEM_QUICKSTART.md](./docs/getting-started/FILE_SYSTEM_QUICKSTART.md)

### When to Use Layer 0 vs Layer 1

**Use Layer 1 (File System)** if you:
- Want a familiar file/folder interface
- Need automatic setup and provider selection
- Are building a general-purpose file storage app
- Prefer simplicity over low-level control

**Use Layer 0 (Direct Storage)** if you:
- Need full control over storage operations
- Are building custom storage logic
- Want to implement your own data structures
- Need direct access to buckets and agreements

## Common Commands

```bash
# General
just --list                  # Show all available commands
just build                   # Build the project
just setup                   # One-time: download binaries + build everything

# Infrastructure
just start-chain             # Start relay + parachain
just start-provider          # Start provider node
just health                  # Check provider health
just stats                   # Provider storage stats

# End-to-end demos (require chain + provider running)
just demo                    # Layer-0 PAPI demo: setup, upload, 2 challenges
just fs-demo-ci              # Layer-1 file-system integration example
just s3-demo-ci              # Layer-1 S3-compatible integration example

# Tests
cargo test --workspace       # All unit + integration tests
just fs-test-all             # File-system layer only
just s3-test-all             # S3 layer only
```

## Documentation

📚 **[Full Documentation](./docs/README.md)** - Complete documentation index

### Quick Links

| Document | Description |
|----------|-------------|
| **[Layer 1 Quick Start](./docs/getting-started/LAYER1_QUICKSTART.md)** | **Three-terminal setup + SDK examples (recommended)** |
| [File System Quick Start](./docs/getting-started/FILE_SYSTEM_QUICKSTART.md) | File-system-only quickstart |
| [File System Docs](./docs/filesystems/README.md) | Complete Layer 1 documentation |
| [Extrinsics Reference](./docs/reference/EXTRINSICS_REFERENCE.md) | Complete blockchain API |
| [Payment Calculator](./docs/reference/PAYMENT_CALCULATOR.md) | Calculate agreement costs |
| [Architecture Design](./docs/design/scalable-web3-storage.md) | System design, economics, common concerns |
| [Implementation Details](./docs/design/scalable-web3-storage-implementation.md) | Technical specs |
| [Photos dApp](./user-interfaces/photos/README.md) | Example photo-storage dApp — Layer 1 + a custom contract ([design](./user-interfaces/photos/DESIGN.md)) |

## Architecture

Two types of nodes work together:

```
┌──────────────────────────┐     ┌──────────────────────────┐
│   BLOCKCHAIN LAYER       │     │    STORAGE LAYER         │
│                          │     │                          │
│  Parachain Node          │────▶│  Provider Node           │
│  (Polkadot Omni Node)    │ RPC │  (HTTP Server)           │
│                          │     │                          │
│  • Stake & registration  │     │  • Data storage          │
│  • Agreements            │     │  • MMR commitments       │
│  • Checkpoints           │     │  • Chunk serving         │
│  • Challenges/slashing   │     │  • Replica sync          │
└──────────────────────────┘     └──────────────────────────┘
      Infrequent                        Hot path
   (setup, disputes)               (all data operations)
```

### Two Nodes, Two Purposes

| Node | Purpose | Run by |
|------|---------|--------|
| **Parachain Node** (Omni Node + Runtime) | Blockchain consensus, state transitions, finality | Collators (parachain validators) |
| **Provider Node** (HTTP Server) | Store actual data, serve clients, respond to challenges | Storage providers |

**Storage providers run both nodes:**
- Parachain node: Participates in blockchain consensus
- Provider node: Handles actual data storage/serving

## Project Structure

```
web3-storage/
├── crates/
│   ├── pallets/            # FRAME pallets: storage-provider, drive-registry, s3-registry
│   │                       #   each with a precompiles/ subfolder (pallet_revive precompiles)
│   ├── primitives/         # Shared types: storage, file-system, s3
│   ├── providers/          # provider-auth (signed HTTP auth), provider-negotiation
│   │                       #   (client<->provider wire protocol), provider-storage
│   └── storage-subxt/      # Static subxt runtime bindings
├── runtimes/               # Parachain runtimes: web3-storage-local, web3-storage-paseo
├── provider-node/          # Off-chain HTTP storage server
├── clients/                # Rust client SDKs: storage (Layer 0), file-system, s3 (Layer 1)
├── packages/               # JS/TS workspace: @web3-storage/{core,layer0,layer1,papi,sdk}
├── user-interfaces/        # Web apps: landing, drive-ui, provider, s3-ui, photos, shared
├── examples/               # contracts/ (Solidity dApps), papi/ (end-to-end PAPI demos)
├── scripts/                # Helper scripts (chain spec, health checks, smoke test)
├── chain-specs/            # Chain specification files
├── zombienet/              # Local relay+parachain network configs (zombienet-parachain-local.toml, storage-paseo-local.toml)
└── docs/                   # getting-started, reference, design (review-gated), drafts, filesystems
```

## Development

### Prerequisites

- Rust toolchain: 
   ```toml
   channel = "1.93.0"
   targets = ["wasm32v1-none"]
   components = ["clippy", "rust-src", "rustfmt"]
   ```
- Cargo

### Build

```bash
# Build everything
cargo build --release

# Or use just
just build
```

### Testing

```bash
# Unit tests
cargo test

# Integration tests with running system
just start-chain            # Terminal 1
just start-provider         # Terminal 2
just demo  # Terminal 3
```

### Provider Node Configuration

The provider node uses environment variables for configuration:

| Variable | Description | Default |
|----------|-------------|---------|
| `PROVIDER_ID` | Provider's on-chain account ID (SS58 format) | **Required** |
| `CHAIN_RPC` | Parachain WebSocket RPC endpoint | `ws://127.0.0.1:2222` |
| `BIND_ADDR` | HTTP server bind address | `0.0.0.0:3333` |
| `DATA_DIR` | Directory for storing data | `./data` |
| `RUST_LOG` | Log level configuration | `storage_provider_node=debug` |

## Example: Basic Upload Flow

```rust
use storage_client::{Signer, StorageUserClient};

// Connect to provider
let client = StorageUserClient::new(config, Signer::from_seed("//Alice")?)?;

// Upload data (off-chain)
let data = b"Hello, decentralized storage!";
let result = client.upload(bucket_id, data).await?;

// Verify upload
let downloaded = client.download(bucket_id, result.seq).await?;
assert_eq!(data, downloaded);
```

See [Client README](./clients/storage/README.md) for complete examples.

## Key Features

- **Off-chain storage**: All data operations happen off-chain via HTTP
- **On-chain accountability**: Stake-based provider registration with slashing
- **Content-addressed**: All data is blake2-256 content-addressed
- **MMR commitments**: Merkle Mountain Range for efficient proofs
- **Challenge mechanism**: Anyone can challenge providers to prove data possession
- **Replica support**: Primary providers can sync to replica providers
- **Flexible agreements**: Customizable duration, capacity, pricing per provider

## Workflow

1. **Provider Setup (on-chain)**
   - Provider registers with stake
   - Provider configures settings (pricing, duration limits)

2. **Bucket Creation (on-chain)**
   - Client creates bucket
   - Client adds members (writers, readers)
   - Client requests storage agreement with provider
   - Provider accepts agreement

3. **Data Storage (off-chain)**
   - Client uploads chunks to provider via HTTP
   - Provider stores and builds MMR commitment
   - Provider signs commitment

4. **Checkpoint (on-chain)**
   - Client submits checkpoint with provider signatures
   - Providers become liable for committed data

5. **Verification (off-chain)**
   - Client spot-checks random chunks periodically
   - Client verifies data integrity via hashes

6. **Dispute (on-chain, rare)**
   - If provider fails to serve data, client challenges
   - Provider must respond with proof or be slashed

## Deployment

For local dev, follow [Layer 1 Quick Start](./docs/getting-started/LAYER1_QUICKSTART.md). For testnet/production, no canonical guide exists yet — see `chain-specs/` and `zombienet/zombienet-parachain-local.toml` for current local network shape.

## Contributing

See [CONTRIBUTING.md](./CONTRIBUTING.md) for setup instructions, PR process,
code style, and licensing details.

## Security

The security policy for this project is governed by the
[paritytech organization-level security policy](https://github.com/paritytech/.github/blob/master/SECURITY.md).
If you discover a vulnerability, please follow the responsible disclosure process described there.

## License

This project is dual-licensed:

- **Runtime, provider node, and user-interface applications** are licensed under
  [GPL-3.0-only](LICENSE-GPL3).
- **Pallets, primitives, client SDKs, and shared libraries** are licensed under
  [Apache-2.0](LICENSE-APACHE2).

Each crate and package declares its applicable license in its `Cargo.toml` or
`package.json`. See the individual LICENSE files at the repository root for the
full license texts.

web3-storage

web3-storage 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

web3-storage

web3-storage 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README