KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #developer-tools #ai-agent #claude-code #codex #typescript #ai-agents #deepseek-harness #mcp #cli #rust

led-matrix-editor

★ 69 Open GitHub ↗

LED matrix 8x8 online editor

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# led-matrix-editor
LED matrix 8x8 online editor

[LED Matrix Editor](http://xantorohara.github.io/led-matrix-editor) - 
is online tool for editing and creating animations for LED matrices.

![Screenshot](https://raw.githubusercontent.com/xantorohara/led-matrix-editor/master/resources/led-matrix-editor-screenshot.png)

It looks very simple, but it has some handy features:

- Online, free and safe. No additional software required.
- Toggle LEDs using a mouse
- Toggle a whole row or column by clicking the appropriate matrix's index
- Shift the matrix Up, Down, Left or Right via the single click
- Rotate matrix clockwise or counterclock-wise
- Invert or Clear matrix
- Collect matrices in the bottom pane and then reorder them using the Drag-and-Drop
- Update images as well as insert new or delete existing
- Save images as a C code for Arduino
- Import the C code back into the editor at any time
- Choose type of generated code (64-bit integers or arrays of bytes)
- Predefined fonts 8x8
- Use browsing history and save images as a link or bookmark, so you never lost your creations

I hope you will be fun and happy using it.

And this is the sample how to use generated code in the Arduino project:

```C
const int DIN_PIN = 7;
const int CS_PIN = 6;
const int CLK_PIN = 5;

const uint64_t IMAGES[] = {
  0x3e2222223e3e0808, 0x3e22223e3e2a0808, 0x3e223e3e2a2a0808, 0xbe3e3e2a2a2a0808,
  0xbe223e3e2a2a0808, 0xbe22223e3e2a0808, 0xbe2222223e3e0808, 0xbe22223e3e2a0808,
  0xbe223e3e2a2a0808, 0xbebe3e2a2a2a0808, 0xbea23e3e2a2a0808, 0xbea2223e3e2a0808,
  0xbea222223e3e0808, 0xbea2223e3e2a0808, 0xbea23e3e2a2a0808, 0xbebebe2a2a2a0808,
  0xbea2be3e2a2a0808, 0xbea2a23e3e2a0808, 0xbea2a2223e3e0808, 0xbea2a23e3e2a0808,
  0xbea2be3e2a2a0808, 0xbebebeaa2a2a0808, 0xbea2bebe2a2a0808, 0xbea2a2be3e2a0808,
  0xbea2a2a23e3e0808, 0xbea2a2be3e2a0808, 0xbea2bebe2a2a0808, 0xbebebeaaaa2a0808,
  0xbea2bebeaa2a0808, 0xbea2a2bebe2a0808, 0xbea2a2a2be3e0808, 0xbea2a2bebe2a0808,
  0xbea2bebeaa2a0808, 0xbebebeaaaaaa0808, 0xbea2bebeaaaa0808, 0xbea2a2bebeaa0808,
  0xbea2a2a2bebe0808, 0xbea2a2a2a2be1c08, 0xbea2a2a2a2a21c1c, 0xbea2a2a2a222001c,
  0xbea2a2a22222001c, 0xbea2a2222222001c, 0xbea222222222001c, 0xbe2222222222001c,
  0x3e2222222222001c, 0x3e2222222222001c, 0x3e22222222221c1c, 0x3e222222223e1c08
};
const int IMAGES_LEN = sizeof(IMAGES) / sizeof(uint64_t);

LedControl display = LedControl(DIN_PIN, CLK_PIN, CS_PIN);

void setup() {
  display.clearDisplay(0);
  display.shutdown(0, false);
  display.setIntensity(0, 10);
}

void displayImage(uint64_t image) {
  for (int i = 0; i < 8; i++) {
    byte row = (image >> i * 8) & 0xFF;
    for (int j = 0; j < 8; j++) {
      display.setLed(0, i, j, bitRead(row, j));
    }
  }
}

int i = 0;

void loop() {
  displayImage(IMAGES[i]);
  if (++i >= IMAGES_LEN ) {
    i = 0;
  }
  delay(100);
}
```

Connect components:

![Arduino board and LED matrix](https://raw.githubusercontent.com/xantorohara/led-matrix-editor/master/resources/MAH02145_960x540.jpg)

See how it works and enjoy:

[![Video](https://raw.githubusercontent.com/xantorohara/led-matrix-editor/master/resources/MAH02147_960x540.jpg)](resources/MAH02147_960x540.mp4)

You may choose how to store images - as long integers or as byte arrays:

![Screenshot](https://raw.githubusercontent.com/xantorohara/led-matrix-editor/master/resources/led-matrix-editor-bytes.png)

There are a lot LED matrix modules you can buy here:

[![Module](https://raw.githubusercontent.com/xantorohara/led-matrix-editor/master/resources/max7219-module.jpg)](http://s.click.aliexpress.com/e/JUrN7eM)

led-matrix-editor

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README