KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#typescript #ai-agents #cli #open-source #ai #claude-code #codex #developer-tools #dsh-plugin #ai-agent #mcp #deepseek-harness

prophesee_ros_wrapper

★ 96 Open GitHub ↗

ROS driver for Prophesee event-based sensors

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Prophesee ROS Wrapper

![Event-based vision by Prophesee](https://raw.githubusercontent.com/prophesee-ai/prophesee_ros_wrapper/master/event-based_vision_PROPHESEE.png)

The aim of this metapackage is wrapping event-based data from [Prophesee sensors](https://www.prophesee.ai/event-based-sensor-packaged) using [OpenEB](https://github.com/prophesee-ai/openeb) software and publishing the event-based data to ROS.

This metapackage contains ROS wrapper (prophesee_ros_driver) and messages (prophesee_event_msgs) for Prophesee sensors.

prophesee_ros_driver is a ROS wrapper including the following nodes:
  * prophesee_ros_publisher - publishing data from Prophesee sensor to ROS topics
  * prophesee_ros_viewer - listening data from ROS topics and visualizing them on a screen

prophesee_event_msgs package contains ROS message types for Prophesee event-based data, including:
  * Event - an event from a Prophesee camera (uint16 x, uint16 y, ros::Time ts, bool polarity)
  * EventArray - a buffer of events (Event[] events)

Supported [Prophesee Evaluation Kit Cameras](https://docs.prophesee.ai/stable/hw/evk/index.html) :
  * EVKV2 - HD
  * EVKV3 - VGA/320/HD
  * EVKV4 - HD

## Requirements

* Ubuntu 20.04, 22.04 or 24.04 64-bit
  * ROS Noetic
  * curl (`sudo apt install curl`)
    * On Ubuntu 22 and 24, you also need to install libcurl4-openssl-dev by running `sudo apt install libcurl4-openssl-dev`  
  * [OpenEB](https://github.com/prophesee-ai/openeb)

## Installation

First, retrieve and compile [OpenEB](https://github.com/prophesee-ai/openeb).

Then, compile the packages:

* Clone the source code to your catkin workspace ([create a workspace](http://wiki.ros.org/catkin/Tutorials/create_a_workspace), if needed)

```
    cd catkin_ws/src
    git clone https://github.com/prophesee-ai/prophesee_ros_wrapper.git
    cd ..
    ```

* Compile

```
    catkin_make
    ```

* Source the workspace

```
    source ~/catkin_ws/devel/setup.bash
    ```

## Getting Started
  
### Publishing data from a camera and listening to them

To publish data from Prophesee camera to ROS topics, run:

```
roslaunch prophesee_ros_driver prophesee_publisher.launch
```

The following topics will be published:

* /prophesee/camera/cd_events_buffer - buffer of CD (Change Detection) events
  * /prophesee/camera/camera_info - information about the camera

To listen data from ROS topics and visualize them:

```
roslaunch prophesee_ros_driver prophesee_viewer.launch
```

### Recording data from a live camera to rosbag

To record data from live camera to rosbag:
  * Start the publisher:

```
    roslaunch prophesee_ros_driver prophesee_publisher.launch
    ```

* Start rosbag recording (choose the topics to record or record all available topics):

```
    rosbag record -a
    ```

### Publishing data from a RAW file

To publish data from RAW file to ROS topics and view the data:

* Update the prophesee_publisher.launch file to set the path to your RAW file (in `raw_file_to_read` parameter)

```
    rosed prophesee_ros_driver prophesee_publisher.launch
    ```

* Start the ROS core

```
    roscore
    ```
  
  * Start the viewer, at first to be sure to not miss any data:

```
    roslaunch prophesee_ros_driver prophesee_viewer.launch
    ```

* Start the publisher:

```
    roslaunch prophesee_ros_driver prophesee_publisher.launch
    ```

At the end of the RAW file, the publisher will stop on its own, but the viewer won't stop, so it's up to you to quit the viewer.

### Recording data from a RAW file to rosbag

To record data from RAW file to rosbag:

* Update the prophesee_publisher.launch file to set the path to your RAW file (in `raw_file_to_read` parameter)

```
    rosed prophesee_ros_driver prophesee_publisher.launch
    ```

* Start the ROS core

```
    roscore
    ```

* Start rosbag recording (choose the topics to record or record all available topics):

```
    rosbag record -a
    ```

* Start the publisher:

```
    roslaunch prophesee_ros_driver prophesee_publisher.launch
    ```

## Going Further
The ROS wrapper we propose in this repo is a minimal example to get you started.
There are multiple ways to enhance it in terms of features and performance.
The code is open to contributions, thus do not hesitate to [propose pull requests](https://github.com/prophesee-ai/prophesee_ros_wrapper/pulls).

We also recommend you to check this [metavision_driver repository](https://github.com/ros-event-camera/metavision_driver)
that offers a ROS driver for event-based cameras with some speed and features enhancements.

## Contact
In case of any issue, please [raise an issue here on GitHub](https://github.com/prophesee-ai/prophesee_ros_wrapper/issues). 
For any other information [contact us](https://www.prophesee.ai/contact-us/).

prophesee_ros_wrapper

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README