CubeSatDetumblingSimulator

KO | EN

gitlite — search

#typescript #rust #deep-learning #docker #macos #windows #cli #awesome-list #vue #security #openai #ios #mcp #open-source

CubeSatDetumblingSimulator

(★ 24)

6DOF simulation of a CubeSat detumbling in LEO under 3-axis magnetic control using a B-dot controller and LPFs in closed-loop feedback.

CubeSatDetumblingSimulator 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# CubeSat Detumbling Simulator
[![MIT license](https://img.shields.io/badge/License-MIT-blue.svg)](https://github.com/echristhuraj/CubeSatDetumblingSimulator/blob/main/LICENSE.md)

When a satellite such as a CubeSat (a small 10 cm x 10 cm x 10 cm spacecraft) is released from its deployer, it tumbles about all axes and must be detumbled before mission
operations can take place. Detumbling is the process of slowing the body angular rates of a satellite down until its attitude (angular orientation) is stabilized in orbit.
After a satellite is detumbled, the on-board attitude determination and control system (ADCS) can use deterministic methods to acquire initial attitude measurements with 
respect to the inertial reference frame (the Earth-centered inertial (ECI) frame), and recursive methods to perform tasks like nadir-pointing and attitude maintenance.
Written in MATLAB, this CubeSat Detumbling Simulator (originally developed for UCI CubeSat) allows the user to simulate the detumbling phase of a LEO CubeSat (with at least a 
3-axis magnetorquer set, a magnetometer, and a gyroscope) using a B-dot controller and low pass filters (for sensor noise attenuation) in a closed-loop feedback process.

## Requirements

**Hardware**

* Minimum RAM: 8 GB
* Recommended: Dedicated Graphics Card

**Software**

* MATLAB (Ideally R2020b or later)
* MATLAB Aerospace Toolbox

## Usage

Download and unzip the files. Open Main.m in MATLAB. In the "Main Parameters" section, initialize the program by assigning values to each of the parameters, making sure to stay
within the allowable range for each parameter. Run Main.m.

If the `simCalcltnMdfier` parameter is set to 'Real-Time', a GUI window will pop up and will update in real-time as the simulation progresses. While the real-time simulation is 
running, calculation can be paused/continued by toggling the pause/play button under the simulation progress bar.

![cubesat_detumbling_simulator_gui](https://user-images.githubusercontent.com/85334364/121489877-5cd38280-c989-11eb-8aa6-63696955615f.gif)

If the `simCalcltnMdfier` parameter is set to 'Pre-Calculate', the program will run the simulation without real-time updates to the GUI. After the pre-calculations finish,
the GUI window will appear showing the final output. Pre-calculation is significantly faster and potentially a bit more accurate as sampling periods are pre-determined and
MATLAB's [clock](https://www.mathworks.com/help/matlab/ref/clock.html) and [etime](https://www.mathworks.com/help/matlab/ref/etime.html) functions are not needed for timing.

![cubesat_detumbling_simulator_pre_calculation](https://user-images.githubusercontent.com/85334364/122731744-7352c700-d230-11eb-9374-2c20a6235b1a.png)

Once the simulation finishes, a summary of run details will be outputted in the MATLAB Command Window. The code may be edited as desired for customized simulation outputs.

### Tips

1. The default orientation of the CubeSat looks something like the image below. The red/green reference frame is the CubeSat's body frame and the white reference frame is the 
ECI frame. The `initYawAngl_spcrft` (about body Z), `initPtchAngl_spcrft` (about body Y), and `initRollAngl_spcrft` (about body X) parameters (in that order) define the 
intrinsic body frame rotation sequence that represents how the CubeSat will initially be oriented relative to the ECI frame when ejected from the deployer. Note that an 
intrinsic rotation defined by yaw-pitch-roll about body frame axes is the same as an extrinsic rotation defined by roll-pitch-yaw about inertial frame axes.

![cubesat_detumbling_simulator_default_orientation](https://user-images.githubusercontent.com/85334364/121497796-a7a4c880-c990-11eb-887e-9441a1702171.png)

2. The `viewAzmth` and `viewElvtn` parameters are passed into MATLAB's [view](https://www.mathworks.com/help/matlab/ref/view.html) command in the code to set the "camera line of 
sight" for the orbit plot and the spacecraft plot. In other words, these parameters change the angle at which the user sees the ECI frame in these two plots.

## Limitations

* The orbit model is simplified to only support circular orbits (eccentricity = 0) between 200 km and 850 km altitude with nonzero time rates of change for argument of periapsis 
(AOP) and right ascension of the ascending node (RAAN) to model the J2 pertubation effect, and zero rates of change for all other Keplerian elements.
* Disturbance forces and torques on the CubeSat were neglected so that the simplified analytical solution to the gravitational 2-body dynamics equations could be used.
* The only actuators used in the detumbling algorithm are the 3 magnetorquers and the only sensors used are the magnetometer and the gyroscope (often packaged together in 
an inertial measurement unit (IMU)). Obviously, due to the nature of this being a non-HIL simulation, the sensor "measurements" are just direct functions of the simulator models
with the addition of white Gaussian noise and constant bias.
* Euler's method (RK-1) is used for iterative computations as opposed to something like Runge-Kutta 4 (RK-4) to prioritize computational speed over accuracy. The user may
replace RK-1 computations with RK-4 (or other iterative methods) if higher accuracy is desired.

## References

[1] Curtis, Howard D, _Orbital Mechanics for Engineering Students_, 3rd ed. Embry-Riddle Aeronautical University, Daytona Beach, Florida: Butterworth-Heinemann Elsevier Ltd., 2014.

[2] Montalvo, Carlos. "ADCS for LEO Satellites." _YouTube_. https://www.youtube.com/playlist?list=PL_D7_GvGz-v3mDQ9iR-cfjXsQf4DeR1_H.

[3] Sanderson, Grant [3Blue1Brown] and Ben Eater. "Visualizing Quaternions: An explorable video series." _eater.net_. https://eater.net/quaternions/.

[4] Armesto, Leopoldo. "Quaternions: Robotic Systems." _YouTube_. https://www.youtube.com/watch?v=0FbDyWXemLw&t=309s.

CubeSatDetumblingSimulator

CubeSatDetumblingSimulator 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

CubeSatDetumblingSimulator

CubeSatDetumblingSimulator 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README