uta

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 72)

Universal Transcript Archive: comprehensive genome-transcript alignments; multiple transcript sources, versions, and alignment methods; available as a docker image

uta 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# uta -- Universal Transcript Archive

*bringing smiles to transcript users since 2013*

[![docker_badge](https://img.shields.io/docker/pulls/biocommons/uta.svg?maxAge=2592000)](https://hub.docker.com/r/biocommons/uta/)

The UTA (Universal Transcript Archive) stores transcripts aligned to
sequence references (typically genome reference assemblies). It supports
aligning the same transcript to multiple references using multiple
alignment methods. Specifically, it facilitates the following:

-   Querying for multiple transcript sources through a single interface
-   Interpreting variants reported in literature against obsolete
    transcript records
-   Identifying regions where transcript and reference genome sequence
    assemblies disagree
-   Comparing transcripts across from distinct sources
-   Comparing transcript alignments generated by multiple methods
-   Identifying ambiguities in transcript alignments

UTA is used by the [hgvs](https://github.com/biocommons/hgvs) package to
map variants between genomic, transcript, and protein coordinates.

This code repository is primarily used for *generating* the UTA
database. The primary interface for the database itself is via direct
PostgreSQL access. (A [REST interface](https://github.com/biocommons/uta/issues/164/) is planned, but not yet available.)

Users can access a public instance of UTA or build their own instance of
the database.

## Accessing the Public UTA Instance

Invitae provides a public instance of UTA. The connection parameters
are:

**param**    | **value**
------------ | --------------------
**host**     | `uta.biocommons.org`
**port**     | `5432` (default)
**database** | `uta`
**login**    | `anonymous`
**password** | `anonymous`

For example:

$ PGPASSWORD=anonymous psql -h uta.biocommons.org -U anonymous -d uta

Or, in Python (requires [psycopg2](https://pypi.org/project/psycopg2/)):

> import psycopg2, psycopg2.extras
    > conn = psycopg2.connect("host=uta.biocommons.org dbname=uta user=anonymous password=anonymous")
    > cur = conn.cursor(cursor_factory=psycopg2.extras.DictCursor)
    > cur.execute("select * from uta_20140210.tx_def_summary_v where hgnc='BRCA1'")
    > row = cur.fetchone()
    > dict(row)
    {'hgnc': 'BRCA1',
    'cds_md5': 'b3d16af258a759d0321d4f83b55dd51b',
    'es_fingerprint': 'f91ab768a35c8db477fbf04dde6955e2',
    'tx_ac': 'ENST00000357654',
    'alt_ac': 'ENST00000357654',
    'alt_aln_method': 'transcript',
    'alt_strand': 1,
    'exon_set_id': 7027,
    'n_exons': 23,
    'se_i': '0,100;100,199;199,253;253,331;331,420;420,560;560,666;666,712;712,789;789,4215;4215,4304;4304,4476;4476,4603;4603,4794;4794,5105;5105,5193;5193,5271;5271,5312;5312,5396;5396,5451;5451,5525;5525,5586;5586,7094',
    'starts_i': [0,
    100,
    199,
    253,
    331,
    420,
    560,
    666,
    712,
    789,
    4215,
    4304,
    4476,
    4603,
    4794,
    5105,
    5193,
    5271,
    5312,
    5396,
    5451,
    5525,
    5586],
    'ends_i': [100,
    199,
    253,
    331,
    420,
    560,
    666,
    712,
    789,
    4215,
    4304,
    4476,
    4603,
    4794,
    5105,
    5193,
    5271,
    5312,
    5396,
    5451,
    5525,
    5586,
    7094],
    'lengths': [100,
    99,
    54,
    78,
    89,
    140,
    106,
    46,
    77,
    3426,
    89,
    172,
    127,
    191,
    311,
    88,
    78,
    41,
    84,
    55,
    74,
    61,
    1508],
    'cds_start_i': 119,
    'cds_end_i': 5711}

## Installing UTA Locally

### Installing with Docker (preferred)

[Docker](http://docker.com) enables the distribution of lightweight,
isolated packages that run on essentially any platform. When you use
this approach, you will end up with a local UTA installation that runs
as a local PostgreSQL process. The only requirement is Docker itself -
you will not need to install PostgreSQL or any of its dependencies.

1.  [Install Docker](https://docs.docker.com/installation/).

2.  Define the UTA version to download. A list of available versions
    can be found [here](https://hub.docker.com/r/biocommons/uta/tags):

$ uta_v=uta_20241220

This variable is used only for consistency in the examples that
    follow. Defining this variable is not required for any other reason.

The UTA version string indicates the data release date. The tag is
    made at the time of loading and is used to derive the filename for
    the database dumps and docker images. Therefore, the public
    c instances, database dumps, and docker images will always
    contain exactly the same content.

3.  Fetch the UTA Docker image from Docker Hub:

$ docker pull biocommons/uta:$uta_v

This process will likely take 1-3 minutes.

4.  To prevent bot scraping of the biocommons.org hosting site, you must navigate
    to the downloads site https://dl.biocommons.org/uta/ in a web browser, and click to
    download the desired database snapshot file (ends in `.pgd.gz`). For example, for
    `$uta_v=uta_20241220`, that would be `uta_20241220.pgd.gz`.

You can choose where to download it to from your browser or move it after
    downloading. You will use this path in the next step, to pass this file into
    the UTA docker container in order to initialize the database in the `$uta_v`
    volume. After initialized, you can delete the snapshot file.

5.  Run the image, using the path you have the snapshot saved to. For example
    `/path/to/snapshot/uta_20241220.pgd.gz`. The command below expects it to be in the
    same directory that you run the command from. If you do not already have a docker
    volume called `$uta_v`, the `docker run` command below will create it automatically.
    If you want to bind the postgres server to a port other than the default `5432`,
    you can change the `-p` option below to use some other number like `5555` (`-p 127.0.0.1:5555:5432`).

$ docker run \
           -d \
           -e POSTGRES_PASSWORD=some-password-that-you-make-up \
           -v $uta_v:/var/lib/postgresql/data \
           --mount type=bind,source="$(pwd)/$uta_v.pgd.gz",target="/tmp/$uta_v.pgd.gz",readonly \
           --name $uta_v \
           -p 127.0.0.1:5432:5432 \
           biocommons/uta:$uta_v

The first time you run this image, it will initialize a PostgreSQL database from the snapshot.

On subsequent runs, you can run the container by:

$ docker start $uta_v

`-d` starts the container in daemon (background) mode. To see
    progress:

$ docker logs -f $uta_v

You will see messages from several processes running in parallel.
    Near the end, you'll see:

== You may now connect to uta.  No password is required.
        ...
        2020-05-28 22:08:45.654 UTC [1] LOG:  database system is ready to accept connections

Hit Ctrl-C to stop watching logs. The container will still be
    running.

6.  Test your installation.

With the test commands below, you should see a table dump with at
    least 4 lines showing schema_version, create date, license, and uta
    (code) version used to build the instance. If you mapped the container to
    a port other than `5432`, change the `-p` option below (e.g. `-p 5555`).

$ psql -h localhost -U anonymous -d uta -p 5432 -c "select * from $uta_v.meta"

key       |                               value
        ----------------+--------------------------------------------------------------------
         schema_version | 1.1
         created on     | 2015-08-21T10:53:50.666152
         license        | CC-BY-SA (http://creativecommons.org/licenses/by-sa/4.0/deed.en_US
         uta version    | 0.2.0a2.dev11+n52ed6e969cfc
         (4 rows)

7.  (Optional) To configure [hgvs](https://github.com/biocommons/hgvs)
    to use this local installation, consult the
    [hgvs documentation](https://hgvs.readthedocs.io/en/latest/installation.html#local-installation-of-uta-optional)

### Installing from database dumps

Users should prefer the public UTA instance (uta.biocommons.org) or the
Docker installation wherever possible. When those options are not
available, users may wish to create a local PostgreSQL database from
database dumps. Users choosing this method of installation should be
experienced with PostgreSQL administration.

The public site and Docker images are built from exactly the same dumps
as provided below. Building a database from these should result in a
local database that is essentially identical to those options.

Due to the heterogeneity of operating systems and PostgreSQL
installations, **installing from database dumps is unsupported**.

*The following commands will likely need modification appropriate for
the installation environment.*

1.  Download an appropriate database dump from
    [dl.biocommons.org](http://dl.biocommons.org/uta/).

2.  Create a user and database.

You may choose any username and database name you like. uta and
    uta_admin are likely to ease installation.

$ createuser -U postgres uta_admin
        $ createuser -U postgres anonymous
        $ createdb -U postgres -O uta_admin uta

3.  Restore the database.

$ uta_v=uta_20241220
        $ gzip -cdq $uta_v.pgd.gz | psql -U uta_admin -1 -v ON_ERROR_STOP=1 -d uta -Eae

## Developer Setup

### Virtual Environment
To develop UTA, follow these steps.

1.  Set up a virtual environment using your preferred method.
    For example:

$ python3 -m venv uta-venv
        $ source uta-venv/bin/activate

2.  Clone UTA and install:

$ git clone git@github.com:biocommons/uta.git
        $ cd uta
        $ pip install -e .[test]

3.  Restore a database or load a new one using the instructions [above](#installing-from-database-dumps).

4.  To run the tests:

$ python3 -m unittest

### Docker

1. Clone UTA and build docker image:

$ git clone git@github.com:biocommons/uta.git
        $ cd uta
        $ docker build -t uta .

2. Restore a database or load a new one using the instructions [above](#installing-from-database-dumps).

3. Run container and tests

$ docker run -it --rm uta bash

4. Testing

$ docker build --target uta-test -t uta-test .
        $ docker run --rm uta-test python -m unittest

## UTA update procedure

Requires docker.

### 0. Setup

Make directories:
```
mkdir -p $(pwd)/ncbi-data
mkdir -p $(pwd)/output/artifacts
mkdir -p $(pwd)/output/logs
```

Set variables:
```
export UTA_ETL_OLD_UTA_IMAGE_TAG=uta_20240512
export UTA_ETL_OLD_UTA_VERSION=UTA_ETL_OLD_UTA_IMAGE_TAG
export UTA_ETL_NEW_UTA_VERSION=uta_20241220
export UTA_ETL_NCBI_DIR=./ncbi-data
export UTA_ETL_WORK_DIR=./output/artifacts
export UTA_ETL_LOG_DIR=./output/logs
```

Build the UTA image:
```
docker build --target uta -t uta-update .
```

### 1. Download SeqRepo data
```
docker compose run seqrepo-pull
```

Note: pulling data takes ~30 minutes and requires ~13 GB.
Note: a container called seqrepo will be left behind.

### 2. Extract and transform data from NCBI

Download files from NCBI, extract into intermediate files, and load into UTA and SeqRepo.

See 2A for nuclear transcripts and 2B for mitochondrial transcripts.

#### 2A. Nuclear transcripts
```
docker compose run ncbi-download
docker compose run uta-extract
docker compose run seqrepo-load
docker compose run uta-load
```

#### 2B. Mitochondrial transcripts
```
docker compose -f docker-compose.yml -f misc/mito-transcripts/docker-compose-mito-extract.yml run mito-extract
docker compose run seqrepo-load
docker compose run uta-load
```

#### 2C. Manual splign transcripts
To load splign-manual transcripts, the workflow expects an input txdata.yaml file and splign alignments. Define this path
using the environment variable $UTA_SPLIGN_MANUAL_DIR. These file paths should exist:
- `$UTA_SPLIGN_MANUAL_DIR/splign-manual/txdata.yaml`
- `$UTA_SPLIGN_MANUAL_DIR/splign-manual/alignments/*.splign`

[txdata.yaml](loading/data/splign-manual/txdata.yaml) defines the transcripts and their metadata. The [alignments dir](loading/data/splign-manual/alignments) contains the splign alignments.
To run the workflow:
```
export UTA_SPLIGN_MANUAL_DIR=$(pwd)/loading/data/splign-manual/
docker compose run splign-manual
```

UTA has updated and the database has been dumped into a pgd file in `UTA_ETL_WORK_DIR`. SeqRepo has been updated in place.

## Migrations
UTA uses alembic to manage database migrations. To auto-generate a migration:
```
alembic -c etc/alembic.ini revision --autogenerate -m "description of the migration"
```
This will create a migration script in the alembic/versions directory.
Adjust the upgrade and downgrade function definitions. To apply the migration:
```
alembic -c etc/alembic.ini upgrade head
```
To reverse a migration, use `downgrade` with the number of steps to reverse. For example, to reverse the last:
```
alembic -c etc/alembic.ini downgrade -1
```

uta

uta 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

uta

uta 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README