openshift-fluentd-forwarder

KO | EN

gitlite — search

#hacktoberfest #react #llm #golang #deep-learning #linux #docker #windows #kubernetes #vue #pytorch #security #mcp #ios

openshift-fluentd-forwarder

(★ 21)

No description available.

openshift-fluentd-forwarder 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Fluentd Forwarder Container

## Table of Contents

* [Overview](#overview)
* [Public Domain](#public-domain)
* [License](#license)
* [Bill of Materials](#bill-of-materials)
    * [Environment Specifications](#environment-specifications)
    * [Template Files](#template-files)
    * [Config Files](#config-files)
* [Setup Instructions](#setup-instructions)
* [Presenter Notes](#presenter-notes)
    * [Environment Setup](#environment-setup)
    * [Create Build Configuration](#create-build-configuration)
    * [Create Fluentd Forwarder](#create-fluentd-forwarder)
      * [RHEL](#rhel)
        * [RHEL Rsyslog](#rhel-rsyslog)
        * [RHEL splunkex](#rhel-splunkex)
        * [RHEL splunkhec](#rhel-splunkhec)
      * [CentOS](#centos)
        * [CentOS Rsyslog](#centos-rsyslog)
        * [CentOS splunkex](#centos-splunkex)
        * [CentOS splunkhec](#centos-splunkhec)
    * [Configure Fluentd Loggers](#configure-fluentd-loggers)
    * [Additional Configuration](#additional-configuration)
      * [Filtering](#filtering)
    * [Validating the Application](#validating-the-application)
* [Resources](#resources)
* [Privacy](#privacy)
* [Contributing](#contributing)
* [Records](#records)

## Overview
OpenShift can be configured to host an EFK stack that stores and indexes log data but at some sites a log aggregation system is already in place. A forwarding fluentd can be configured to forward log data to a remote collection point. Using a containerized version that runs within OCP both simplifies some of the infrastructure and certificate management and allows rapid deployment with resiliancy.

## Public Domain
This project constitutes a work of the United States Government and is not
subject to domestic copyright protection under 17 USC § 105. This project is in
the public domain within the United States, and copyright and related rights in
the work worldwide are waived through the [CC0 1.0 Universal public domain dedication](https://creativecommons.org/publicdomain/zero/1.0/).
All contributions to this project will be released under the CC0 dedication. By
submitting a pull request you are agreeing to comply with this waiver of
copyright interest.

## License
The project utilizes code licensed under the terms of the Apache Software
License and therefore is licensed under ASL v2 or later.

This program is free software: you can redistribute it and/or modify it under
the terms of the Apache Software License version 2, or (at your option) any
later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the Apache Software License for more details.

You should have received a copy of the Apache Software License along with this
program. If not, see http://www.apache.org/licenses/LICENSE-2.0.html

## Privacy
This project contains only non-sensitive, publicly available data and
information. All material and community participation is covered by the
Surveillance Platform [Disclaimer](https://github.com/CDCgov/template/blob/master/DISCLAIMER.md)
and [Code of Conduct](https://github.com/CDCgov/template/blob/master/code-of-conduct.md).
For more information about CDC's privacy policy, please visit [http://www.cdc.gov/privacy.html](http://www.cdc.gov/privacy.html).

## Bill of Materials

### Environment Specifications

This quickstart should be run on an installation of OpenShift Enterprise V3 with an existing EFK deployment.

### Template Files

* Build Configurations
  * [RHEL](./fluentd-forwarder-build-config-template.yaml)
  * [CentOS](./fluentd-forwarder-centos-config-template.yaml)
* [Application Deployment Template](./fluentd-forwarder-template.yaml)

### Config Files

* [Fluentd Forwarding Configuration](./fluentd.conf.template)
  * Echoed in [ConfigMap section in Application Template](./fluentd-forwarder-template.yaml)

## Setup Instructions

Have the `[fluentd-forwarder-build-config-template](./fluentd-forwarder-build-config-template.yaml)` and the `[fluentd-forwarder-template](./fluentd-forwarder-template.yaml)` available for adding to the cluster. These templates will be needed for creating builds and deploying the application.

### Environment Setup

The EFK stack should already be configured in the "logging" namespace.

### Create Build Configuration

Choose the RHEL (default) or CentOS (-centos) flavor of build configuration. Add the build configuration template to the logging namespace.
```bash
oc project logging
oc apply -f fluentd-forwarder-build-config-template.yaml
```

For CentOS use the -centos template.
```bash
oc project logging
oc apply -f fluentd-forwarder-centos-build-config-template.yaml
```

Process the template to create a build, using any relevant variables. In the general case the defaults are fine.
```bash
oc project logging
oc process fluentd-forwarder | oc apply -f -
```

For CentOS process the -centos template.
```bash
oc project logging
oc process fluentd-forwarder-centos | oc apply -f -
```

By default the build will disable all repositories in the base image, enabling only the ones required for installing the required packages. If you want to use the build process to use the existing repository config as is (e.g. if you're using a custom base image) then set the `USE_SYSTEM_REPOS` environment variable to any value in the BuildConfig object.
```
oc project logging
oc set env bc/fluentd-forwarder USE_SYSTEM_REPOS=1
```

On CentOS:
```
oc project logging
oc set env bc/fluentd-forwarder-centos USE_SYSTEM_REPOS=1
```

Build the fluentd-forwarder
```bash
oc project logging
oc start-build fluentd-forwarder-build
```

To build with CentOS use the -centos build configuration.
```bash
oc project logging
oc start-build fluentd-forwarder-centos-build
```

### Create Fluentd Forwarder

Add the template to the logging namespace:
```bash
oc project logging
oc apply -f fluentd-forwarder-template.yaml
```

#### RHEL

##### RHEL Rsyslog

Create the new rsyslog logging forwarder application deployment:
```bash
oc project logging
oc new-app fluentd-forwarder \
   -p "P_TARGET_TYPE=remote_syslog" \
   -p "P_TARGET_HOST=rsyslog.internal.company.com" \
   -p "P_TARGET_PORT=514" \
   -p "P_SHARED_KEY=changeme"
```

##### RHEL splunkex

To create the new splunk-ex logging forwarder application deployment:
```bash
oc project logging && \
oc process -f fluentd-forwarder-template.yaml \
   -p "P_TARGET_TYPE=splunk_ex" \
   -p "P_TARGET_HOST=10.10.10.10" \
   -p "P_TARGET_PORT=9997" \
   -p "P_SHARED_KEY=changeme" \
   -p "P_ADDITIONAL_OPTS=output_format json"
```

##### RHEL splunkhec

To create the new splunkhec logging forwarder application deployment:
```bash
oc project logging
oc new-app fluentd-forwarder \
   -p P_TARGET_TYPE="splunkhec" \
   -p P_TARGET_HOST="examplehec.example.com" \
   -p P_TARGET_PORT="8088" \
   -p P_SHARED_KEY="changeme" \
   -p P_ADDITIONAL_OPTS="token <token_value>"
```

#### CentOS

##### CentOS Rsyslog

To do the same for CentOS you need to reference the ImageStream created by that build.
```bash
oc project logging
oc new-app fluentd-forwarder \
   -p "P_IMAGE_NAME=fluentd-forwarder-centos" \
   -p "P_TARGET_TYPE=remote_syslog" \
   -p "P_TARGET_HOST=rsyslog.internal.company.com" \
   -p "P_TARGET_PORT=514" \
   -p "P_SHARED_KEY=changeme"
```

##### CentOS splunkex

To create the new splunk-ex logging forwarder application deployment:
```bash
oc project logging && \
oc process -f fluentd-forwarder-template.yaml \
   -p "P_IMAGE_NAME=fluentd-forwarder-centos" \
   -p "P_TARGET_TYPE=splunk_ex" \
   -p "P_TARGET_HOST=10.10.10.10" \
   -p "P_TARGET_PORT=9997" \
   -p "P_SHARED_KEY=changeme" \
   -p "P_ADDITIONAL_OPTS=output_format json"
```

##### CentOS splunkhec

To create the new splunkhec logging forwarder application deployment:
```bash
oc project logging
oc new-app fluentd-forwarder \
   -p "P_IMAGE_NAME=fluentd-forwarder-centos" \
   -p P_TARGET_TYPE="splunkhec" \
   -p P_TARGET_HOST="examplehec.example.com" \
   -p P_TARGET_PORT="8088" \
   -p P_SHARED_KEY="changeme" \
   -p P_ADDITIONAL_OPTS="token <token_value>"
```

A full list of parameters can be found in the [template](./fluentd-forwarder-template.yaml). Additional non-parameterized parameters and environment variables can be found in the [Dockerfile](./Dockerfile).

### Configure Fluentd Loggers

The "logging-fluentd" configmap's "data.secure-forward.conf" key needs to be edited as well.
```bash
oc edit configmap -n logging logging-fluentd
```

Edit the following YAML:

```yaml
data:
  secure-forward.conf: |
    <store>
      @type secure_forward

self_hostname ${HOSTNAME}
      shared_key changeme

secure yes
      enable_strict_verification yes

ca_cert_path /var/run/secrets/kubernetes.io/serviceaccount/service-ca.crt

<server>
         host fluentd-forwarder.logging.svc.cluster.local
         port 24284
      </server>
    </store>
```

This will cause each individual fluentd logger to begin forwarding to the service address `fluentd-forwarder.logging.svc.cluster.local` which was created with the new-app command. That service has it's own cluster-generated certificates and the "ca_cert_path" value here is used to trust the cluster's service signer CA.

After saving the above changes the logging-fluentd pods need to be restarted. Delete them and they will be recreated.
```bash
oc delete pod -l component=fluentd
```

### Additional Configuration
After creating the application you can edit the configuration for the logging forwarder in a more direct manner by manipulating the configuration map.
```bash
oc edit configmap -n logging fluentd-forwarder
```

This will allow you to edit a copy of the configuration template and override the one provided in the Docker container without performing a rebuild.

Any environment variables (like `SHARED_KEY` or `TARGET_TYPE`) will be substituted during the Pod startup just as with the built-in template using the `envsubst` command. Additional parameters can be added to the deployment config or directly edited here.

```yaml
data:
  fluentd.conf: |
    <source>
      @type secure_forward
      self_hostname "#{ENV['HOSTNAME']}"
      bind 0.0.0.0
      port 24284

shared_key ${SHARED_KEY}

secure           ${IS_SECURE}
      enable_strict_verification ${STRICT_VERIFICATION}

ca_cert_path     ${CA_PATH}
      cert_path        ${CERT_PATH}
      private_key_path ${KEY_PATH}

private_key_passphrase ${KEY_PASSPHRASE}
    </source>

<filter **>
      @type record_transformer
      <record>
        forwarded_by "#{ENV['HOSTNAME']}"
        source_component "OCP"
      </record>
    </filter>

<match **>
      type ${TARGET_TYPE}
      host ${TARGET_HOST}
      port ${TARGET_PORT}
      output_format json
    </match>
```

If you save changes to this configuration map you will need to delete the pods for the deployment so they can be recreated.

```bash
oc delete pods -l name=fluentd-forwarder
```

#### Filtering
In some use cases it might be necessary to perform filtering at the external fluentd process.  This would be done to reduce the number or type of messages that are forwared.

Using the fluentd.conf file from above a new record will be added to the json message.  The record `kubernetes_namespace_name` will be set to the OpenShift namespace from where the messages originated.

```yaml
data:
  fluentd.conf: |
    <source>
      @type secure_forward
      self_hostname "#{ENV['HOSTNAME']}"
      bind 0.0.0.0
      port 24284

shared_key ${SHARED_KEY}

secure           ${IS_SECURE}
      enable_strict_verification ${STRICT_VERIFICATION}

ca_cert_path     ${CA_PATH}
      cert_path        ${CERT_PATH}
      private_key_path ${KEY_PATH}

private_key_passphrase ${KEY_PASSPHRASE}
    </source>

<filter **>
      @type record_transformer
      enable_ruby yes
      auto_typecast yes
      <record>
        kubernetes_namespace_name ${record["kubernetes"].nil? ? 'devnull' : record["kubernetes"]["namespace_name"].nil? ? 'devnull' : record["kubernetes"]["namespace_name"]}
        forwarded_by "#{ENV['HOSTNAME']}"
        source_component "OCP"
      </record>
    </filter>

</filter>

<match **>
      @type ${TARGET_TYPE}
      #host ${TARGET_HOST}
      #port ${TARGET_PORT}
      ${ADDITIONAL_OPTS}
    </match>
```

All system level messages would be dropped in the example above.  To filter system messages filter on the `system.**` tag.

```yaml
data:
  fluentd.conf: |
    <source>
      @type secure_forward
      self_hostname "#{ENV['HOSTNAME']}"
      bind 0.0.0.0
      port 24284

shared_key ${SHARED_KEY}

secure           ${IS_SECURE}
      enable_strict_verification ${STRICT_VERIFICATION}

ca_cert_path     ${CA_PATH}
      cert_path        ${CERT_PATH}
      private_key_path ${KEY_PATH}

private_key_passphrase ${KEY_PASSPHRASE}
    </source>

<filter system.**>
      #Add system filtering logic here.
    </filter>

<match system.**>
      @type ${TARGET_TYPE}
      #host ${TARGET_HOST}
      #port ${TARGET_PORT}
      ${ADDITIONAL_OPTS}
    </match>

#Toss the rest of the records.
    <match **>
      @type null
    </match>
```

### Validating the Application
The best verification is that logs are showing up in the remote location. The application sets two tags "forwarded_by" which is set to the pod's hostname and "source_component" which is always set to "OCP". You can use those tags to search the logging collection facility for the logs being produced.

If VERBOSE is set as an environment variable in the deployment config (`oc edit dc fluentd-forwarder`) then you can tail the logs of the fluentd-forwarder container and you should see a lot of information about reads. This is not the most reliable test but it will at least point in the right direction.

```bash
oc logs fluentd-forwarder-1-a3zdf
2017-06-19 21:05:20 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:23 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:24 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:25 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:25 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:25 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:25 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:26 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:26 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
```

## Resources
* [Secure Forwarding with Splunk](http://v1.uncontained.io/playbooks/operationalizing/secure-forward-splunk.html)
* [Origin Fluentd Image Source](https://github.com/openshift/origin-aggregated-logging/blob/master/fluentd/Dockerfile)
* [Fluentd Filter Plugin Overview](http://docs.fluentd.org/v0.12/articles/filter-plugin-overview)

## Privacy
This project contains only non-sensitive, publicly available data and
information. All material and community participation is covered by the
Surveillance Platform [Disclaimer](https://github.com/CDCgov/template/blob/master/DISCLAIMER.md)
and [Code of Conduct](https://github.com/CDCgov/template/blob/master/code-of-conduct.md).
For more information about CDC's privacy policy, please visit [http://www.cdc.gov/privacy.html](http://www.cdc.gov/privacy.html).

## Contributing
Anyone is encouraged to contribute to the project by [forking](https://help.github.com/articles/fork-a-repo)
and submitting a pull request. (If you are new to GitHub, you might start with a
[basic tutorial](https://help.github.com/articles/set-up-git).) By contributing
to this project, you grant a world-wide, royalty-free, perpetual, irrevocable,
non-exclusive, transferable license to all users under the terms of the
[Apache Software License v2](http://www.apache.org/licenses/LICENSE-2.0.html) or
later.

All comments, messages, pull requests, and other submissions received through
CDC including this GitHub page are subject to the [Presidential Records Act](http://www.archives.gov/about/laws/presidential-records.html)
and may be archived. Learn more at [http://www.cdc.gov/other/privacy.html](http://www.cdc.gov/other/privacy.html).

## Records
This project is not a source of government records, but is a copy to increase
collaboration and collaborative potential. All government records will be
published through the [CDC web site](http://www.cdc.gov).

openshift-fluentd-forwarder

openshift-fluentd-forwarder 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

openshift-fluentd-forwarder

openshift-fluentd-forwarder 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README