CFAF240240A1-013T_Video

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

CFAF240240A1-013T_Video

(★ 14)

Video playback on a 240x240 1.3" display from an SD card using the ESP32

CFAF240240A1-013T_Video 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Video playback on a CFAF240240A1-013T

## Description 
This example code plays back a video on the [CFAF240240A1-013T](https://www.crystalfontz.com/product/cfaf240240a1013t) from an SD Card. It was built using the ESP-IDF toolchain and Visual Studio Code. For step-by-step guide on how to use the toolchain, follow the link [here](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/).

Also, there's a new extension from Espressif that we haven't tested but will definitely look into, [here](https://marketplace.visualstudio.com/items?itemName=espressif.esp-idf-extension).

## SD Video
To streamline the program, the video was preprocessed into a raw file. This allows us to read straight from the SD card and put the information directly on the screen. A link to the video file that was used (~805mb file size) can be found [here](https://baxsie.com/images/CFA/Github/BBB_565.raw).

## Hardware
* [uSD Card](https://www.crystalfontz.com/product/cfapn01879-usd-card-4-gb)
* [uSD Card Holder](https://www.crystalfontz.com/product/cfa10112-sd-card-reader)
  * This code does not use the quad spi capabilities at the moment
* [ESP32 Dev Kit](https://www.amazon.com/MELIFE-Development-Dual-Mode-Microcontroller-Integrated/dp/B07Q576VWZ/ref=asc_df_B07Q576VWZ) (we used a MELIFE DEVKITV1 but any should work)
* [Wires](https://www.crystalfontz.com/product/wrjmpy40)

### Connecting the hardware

The following block of texts shows how the hardware was connected.

``  ESP | LCD | Description        ``  
``-------+----+----------------------``  
``GPIO15 | 13 | CS                    ``  
``GPIO16 | 15 | RESET                 ``  
``GPIO17 | 12 | D/C                   ``  
``GPIO13 | 10 | MOSI                  ``  
``GPIO14 | 09 | CLK                  ``  
``-------+----+----------------------``

``SD control lines                      ``  
`` ESP | SD Description              ``  
``-------+---------------------------- ``  
`` GPIO5 | CS                          ``  
`` GPIO18 | PIN_NUM_CLK                 ``  
`` GPIO19 | MISO                        ``  
`` GPIO23 | MOSI                        ``

Don't forget to connect your power!

## Configure the project

```
make menuconfig
```

* Set serial port under Serial Flasher Options.

## Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

```
make -j4 flash monitor
```

For a faster build and if the PC has eight cores, -j8 can be used instead of -j4.

(To exit the serial monitor, type ``Ctrl-]``.)

## Copyright info
The video being played is Big Buck Bunny (c) copyright 2008, Blender Foundation / www.bigbuckbunny.org

CFAF240240A1-013T_Video

CFAF240240A1-013T_Video 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

CFAF240240A1-013T_Video

CFAF240240A1-013T_Video 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README