Battery

KO | EN

gitlite — search

#javascript #hacktoberfest #react #llm #android #deep-learning #linux #docker #windows #awesome #cli #vue #ios #open-source

(★ 268)

Battery is a bash script to display your Laptop's battery status on the terminal.

파일 탐색기

최종 버전 다운로드 (.zip)

.gitignore
battery
LICENSE.txt
README.md

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Battery

![image](http://i.imgur.com/mEEPD.png)

Battery is a little bash script that uses [Spark](https://github.com/holman/spark) to display the battery status on your __tmux__ sessions or the __terminal__.

### Features

* Changes color to reflect battery status (Green, Yellow, Red)
* Displays battery percentage
* Graph bar changes its values between 0 and 100% (thanks to spark)
* If you don't like the default colors, you can specify the good, medium and warning battery status colors using flags (read usage).

### Requirements

Right now, battery requires [Spark](https://github.com/holman/spark) to graph your battery status.
Battery can run on both __Mac OS X__ and Linux.

If you don't want to use Spark, you can use the `-a` flag, for ascii output:
![image](http://i.imgur.com/w9qtQeu.png)

# Install - Mac

### Homebrew

Just do (case sensitive)

brew tap Goles/battery
    brew install battery

### One Liner
(Cut & Paste on terminal to install on `/usr/bin`, btw, try to run from `~/` or other writable dir)

brew install spark; curl -O https://raw.github.com/Goles/Battery/master/battery ; \
	sudo mv battery /usr/bin; sudo chmod 755 /usr/bin/battery

### Step by Step

* Install spark (with [Homebrew](https://github.com/mxcl/homebrew) on Mac OS X)

``` brew install spark```

* Copy battery somewhere in your path & fix permissions

``` sudo cp battery /usr/bin ```

``` sudo chmod 755 /usr/bin/battery ```

# Install - Linux

Linux support is still being tested. It ought to work properly in Debian and
Ubuntu, but is largely untested in other distributions. Using linux requires
`upower`, which should be included, or available, on most linux distributions.

It's recommended to install this somewhere in your path that is writable,
like `/usr/local/bin`

```bash
# if you also want to use spark
curl -O https://raw.githubusercontent.com/holman/spark/master/spark
mv spark /usr/local/bin
chmod u+x /usr/local/bin/spark

curl -O https://raw.githubusercontent.com/goles/battery/master/battery
mv battery /usr/local/bin
chmod u+x /usr/local/bin/battery
```
__NOTE:__ This `spark` is *not* the same `spark` that you would install by doing

```bash
$ sudo aptitude install spark
```
That is [Apache Spark](http://spark.apache.org), which is a general engine for
large-scale data processing.

# Usage

### Terminal

* Run Battery (From the terminal)

``` battery ```
###### You should see something like this:
![image](http://i.imgur.com/SLSBg.png)

### tmux

* Be sure to make tmux display utf-8 characters by running it with the `-u` flag

```tmux -u```

* Add the following line to your `~/.tmux.conf` file

``` set -g status-right "#(/usr/bin/battery -t)"```

* reload the tmux config by running `tmux source-file ~/.tmux.conf`.

###### You should now see something like this at the bottom right corner:
![image](http://i.imgur.com/Eaajb.png)

# Flags

The flag `-b` will set a different battery path, the default value is `/sys/class/power_supply/BAT0`. You can specifiy the colors for __good__ battery level, __middle__ battery level, and __warning__ battery level with the flags ``` -g -m -w ```.
__Note:__ You should use color names for when in tmux mode and [ascii colors](http://www.termsys.demon.co.uk/vtansi.htm#colors) in terminal mode.
In Mac OS, you can specify to use pmset with the `-p` flag; without it, the program uses `ioreg`. In Linux, this flag is ignored, and always uses `upower`.

Battery displays an emoji by default. You can disable this behaviour by passing the `-e` flag.

The flag `-z` will add zsh escape characters to the output of the script.

Battery

파일 탐색기

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Battery

파일 탐색기

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README