KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #developer-tools #ai-agent #claude-code #codex #typescript #ai-agents #deepseek-harness #mcp #cli #rust

eXaDrums

★ 57 Open GitHub ↗

:drum: Software drum module (graphical user interface).

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# eXaDrums

## Software drum module

ExaDrums is a software drum module that allows drummers to play with custom-made drum kits.
It is user-friendly and combines high quality stereo sound with low latency.

Each drum kit provides individual sliders (faders) in order to control the volume of its drum pads.

A built-in metronome can be synchronized with a rhythm coach to make practice sessions easiy and efficient.

The drum triggers can be adjusted so that their response feels as natural as possible, and different sensor interfaces include a virtual (on-screen) multi pad and external sensors can be used.

Although eXaDrums is usable as a drum module, it is still an experimental project and some features are not yet implemented.

![eXaDrums GUI](https://cdn.hackaday.io/images/5750291588968677437.png)
  
*A screenshot of eXaDrums' user interface running on a Raspberry Pi.*

This repository holds the official graphical user interface of the eXaDrums software.
To use it, you will have to install [libeXaDrums](https://github.com/SpintroniK/libeXaDrums), and follow the instructions below.

## Table of content

- [Simplified Installation](#simplified-installation)
- [Installation and configuration](#installation-and-configuration)
  - [Dependencies](#dependencies)
  - [Building eXaDrums](#building-exadrums)
  - [Installation](#installation)
  - [Configuration](#configuration)
- [Usage](#usage)

## Simplified Installation

If you are using Debian Bullseye or newer, or Ubuntu >=19.10, you can install exadrums using apt:

```shell
sudo apt install exadrums
```

If that does not work, there is another way to install official releases.
Simply copy and paste the following lines in a terminal:

```shell
wget https://github.com/SpintroniK/eXaDrums/releases/download/debian%2F0.4.1-1/libexadrums0_0.4.2-1_armhf.deb
wget https://github.com/SpintroniK/eXaDrums/releases/download/debian%2F0.4.1-1/exadrums_0.4.1-1_armhf.deb
```

These lines will download the packages for libexadrums and exadrums.
You can install them by running the following two commands:

```shell
sudo apt install ./libexadrums0_0.4.2-1_armhf.deb
sudo apt install ./exadrums_0.4.1-1_armhf.deb
```

That is all. After the installation completes, you will have a working version of exadrums.
You can check that everything is installed and running properly by typing `exadrums` in your terminal.

## Installation and configuration

Both libexadrums and exadrums are available in the Debian unstable and testing distributions, as well as Ubuntu >=19.10.
If you wish to use the latest versions, you can build the packages from the Github repositories.

### Dependencies

Exadrums depends on [libexadrums](https://github.com/SpintroniK/libeXaDrums), so make sure you have it installed first.
Both `libexadrums0` and `libexadrums-dev` packages need to be installed, as well as their dependencies:

```shell
sudo apt install libasound2-dev libtinyxml2-dev libminizip-dev libgtkmm-3.0-dev
```

In order to build eXadrums, you will need build-essential, autotools and pkg-config:

```shell
sudo apt install autoconf automake libtool build-essential pkg-config
```

If you wish to build the Debian packages (which is the recommended way to install
this software), you will need to install debhelper:

```shell
sudo apt install debhelper
```

You will also need to install git, so that you can clone this repository:

```shell
sudo apt install git
git clone https://github.com/SpintroniK/eXaDrums.git
```

### Building eXaDrums

Now that you have all dependencies, you can build the Debian packages.
Make sure you have dehelper installed, and then checkout the debian branch
from your cloned repository:

```shell
cd eXaDrums
git checkout debian
```

Then you can build the package:

```shell
dpkg-buildpackage -b -uc -us
```

If you have multiple cores/threads, you can speed up the build process by appending the option -jn to dpkg-buildpackage, where n is the number of threads that you want to use for the compilation.
Example, for four threads type: `dpkg-buildpackage -b -uc -us -j4`.

### Installation

The Debian packages are built in the parent directory, so you should be able to install them by using dpkg (don't forget to install them as root):

```shell
cd ..
sudo apt install ./exadrums_[...].deb
```

### Configuration

## Usage

eXaDrums

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README