OpenTag

(★ 99)

OpenTag Mainline Distribution

File Explorer

Download Latest Version (.zip)

- - crcmodel.c
  - crcmodel.h
  - crctable.c
  - crctable_CCITT.txt
  - crctable_CRC-Baicheva.txt
  - crctable_CRC16.txt
  - crctable_CRC5.txt
  - crctable_crc6
  - crctable_CRC6.txt
  - crctabler
  - crctabler_crc16
  - crctabler_crc8
- - _Readme.txt
  - adc12_floating_pin.7z
  - adc12_floating_pin_1.bin
  - adc12_floating_pin_4.bin
  - adc12_tempsensor.7z
  - adc12_tempsensor.txt
  - CC430_pin_8lsb_maxspeed.txt
  - CC430_pin_8lsb_maxspeed.txt.bin
  - chisq.c
  - ent
  - ent.c
  - iso8859.c
  - iso8859.h
  - Makefile
  - randtest.c
  - randtest.h
- - crc16_test.c
  - crc16_test[old].c
  - crc_calc_block.c
  - Makefile
  - test1
- - _Readme.txt
  - Makefile
  - testlist_req.dsh
  - testlist_resp.dsh
- - slistf_test.c
- - Board defines.h
  - defines.h
  - init.c
  - interrupt.c
  - LF.c
  - main.c
  - PaLFi_TMS3705.c
- - _readme.txt
  - board_select.h
  - features_default_config.h
  - fs_default_config.h
  - fs_default_startup.c
- - _readme.txt
- - _readme.md
- - _readme.txt
- - _readme.txt
- - _readme.txt
- - _readme.txt
- - beacon_discovery.c
  - collect_sensorlist.c
  - udp_querytoken.c
- - dll_sig_rfinit.c
  - dll_sig_rfterminate_1.c
  - dll_sig_rfterminate_2.c
  - mpipe_sig_done.c
  - network_sig_route.c
  - sys_sig_panic.c
  - sys_sig_powerdown.c
  - sys_sig_powerdown_[msp430fast].c
  - sys_sig_powerdown_[msp430slow].c
  - sys_sig_powerdown_[stm32lp].c
- - _readme_bintex.txt
  - bintex.c
  - bintex.h
  - bintex_ot.c
  - bintex_ot.h
  - test_1.txt
- - crc32.h
- - bgcrc8.h
  - capi.h
  - dll.h
  - encode.h
  - encode_table.h
  - m2task.h
  - network.h
  - radio.h
  - radio~.h
  - session.h
  - tmpl.h
  - transport.h
- - alp.h
  - auth.h
  - buffers.h
  - crc16.h
  - crc16_table.h
  - crypto.h
  - delay.h
  - logger.h
  - memcpy.h
  - ndef.h
  - queue.h
  - rand.h
  - triggers.h
  - utils.h
- - alp_task.h
  - config.h
  - faults.h
  - indicators.h
  - mpipe.h
  - otthread.h
  - support.h
  - sysclock.h
  - sysext.h
  - syskern.h
  - sysqueue.h
  - time.h
  - types.h
  - veelite.h
  - veelite_core.h
  - version.h
- - capi.h
  - config.h
  - data.h
  - init.h
  - interrupts.h
  - memcpy.h
  - speed.h
  - tasking.h
  - timers.h
- board.h
- m2api.h
- otlib.h
- otplatform.h
- otstd.h
- otsys.h
- - gnssnull_task.c
- - null_defaults.h
  - null_interface.h
  - null_MSP430.m
  - null_registers.h
  - radio_null.c
  - radio_null.h
  - radio_null.m
- - radio_rm2.c
  - radio_rm2.h
  - radio_rm2_patch.c
  - SPIRIT1_interface.c
- - core_cm3.c
  - core_cm3.h
- - CMSIS_END_USER_LICENCE_AGREEMENT.pdf
  - CMSIS_END_USER_LICENCE_AGREEMENT.rtf
- - Release_Notes.html
- - Release_Notes.html
- - Release_Notes.html
  - stm32f0xx_flash.c
  - stm32f0xx_flash.h
  - stm32f0xx_pwr.c
  - stm32f0xx_pwr.h
  - stm32f0xx_rcc.c
  - stm32f0xx_rcc.h
- - Release_Notes.html
- - Release_Notes.html
- - m2_dll_task[old].c
  - m2_network[old].c
  - m2_tasker[old].c
  - radio_task[old].c
  - session[old].c
- bgcrc8.c
- capi.c
- dll_task.c
- encode.c
- m2tasker.c
- network.c
- radio_task.c
- session.c
- transport.c
- alp_api_client.c
- alp_api_server.c
- alp_dashforth.c
- alp_filedata.c
- alp_logger.c
- alp_main.c
- alp_main.c.old
- alp_security.c
- alp_sensor.c
- alp_tmpl.c
- auth.c
- buffers.c
- crc16.c
- crypto.c
- logger.c
- queue.c
- trigger.c
- utils.c
- veelite.c
- veelite[32].c
- _readme.md
- external.c
- faults.c
- indicators.c
- Makefile
- mpipe_task.c
- otat_task.c
- sysqueue.c
- system_gulp.c
- system_hicculp.c
- system_hicculp2.c
- time.c
- - _Readme_POSIXC.txt
  - core_errors.c
  - core_gptim.c
  - core_isr.c
  - core_main.c
  - core_tasking.c
  - core_watchdog.c
  - ext_crc32.c
  - fs_defaults.c
  - io_SPIRIT1.c
  - otlib_delay.c
  - otlib_eax.c
  - otlib_memcpy.c
  - otlib_rand.c
  - otsys_mpipe_uart.c
  - otsys_mpipe_usbcdc.c
  - otsys_time.c
  - otsys_veelite_generic.c
- - _Readme_stdc.txt
  - mpipe_stdc_uart[legacy].c
  - platform_stdc.c
  - platform_stdc.h
  - veelite_core_X2_stdc.c
- - _Readme_STM32F0xx.txt
  - core_errors.c
  - core_gptim.c
  - core_isr.c
  - core_main.c
  - core_tasking.c
  - core_watchdog.c
  - io_SPIRIT1.c
  - L1-F0 notes.txt
  - otlib_delay.c
  - otlib_eax.c
  - otlib_memcpy.c
  - otlib_rand.c
  - otsys_mpipe_uart.c
  - otsys_mpipe_usbcdc.c
  - otsys_veelite_X2.c
  - stm32f0xx_flash.c
  - stm32f0xx_flash.h
  - stm32f0xx_pwr.c
  - stm32f0xx_pwr.h
  - stm32f0xx_rcc.c
  - stm32f0xx_rcc.h
- - _Readme_STM32L0xx.txt
  - core_errors.c
  - core_gptim.c
  - core_gptim.c.test
  - core_isr.c
  - core_main.c
  - core_tasking.c
  - core_watchdog.c
  - io_SPIRIT1.c
  - io_SX127x.c
  - otlib_crc16.c
  - otlib_delay.c
  - otlib_eax.c
  - otlib_memcpy.c
  - otlib_rand.c
  - otsys_mpipe_uart.c
  - otsys_mpipe_usbcdc.c
  - otsys_veelite_EE.c
  - otsys_veelite_SRAM.c
  - otsys_veelite_X2.c
  - stm32_hal_legacy.h
  - stm32l0xx_hal.c
  - stm32l0xx_hal.h
  - stm32l0xx_hal_conf.h
  - stm32l0xx_hal_def.h
  - stm32l0xx_hal_flash.c
  - stm32l0xx_hal_flash.h
  - stm32l0xx_hal_flash_ex.c
  - stm32l0xx_hal_flash_ex.h
  - stm32l0xx_hal_flash_ramfunc.c
  - stm32l0xx_hal_flash_ramfunc.h
  - stm32l0xx_hal_gpio.c
  - stm32l0xx_hal_gpio.h
  - stm32l0xx_hal_gpio_ex.h
  - stm32l0xx_hal_pcd.c
  - stm32l0xx_hal_pcd.h
  - stm32l0xx_hal_pcd_ex.c
  - stm32l0xx_hal_pcd_ex.h
  - stm32l0xx_hal_pwr.c
  - stm32l0xx_hal_pwr.h
  - stm32l0xx_hal_pwr_ex.c
  - stm32l0xx_hal_pwr_ex.h
  - stm32l0xx_hal_rcc.c
  - stm32l0xx_hal_rcc.h
  - stm32l0xx_hal_rcc_ex.c
  - stm32l0xx_hal_rcc_ex.h
- - _Readme_STM32L1xx.txt
  - core_errors.c
  - core_gptim.c
  - core_isr.c
  - core_main.c
  - core_tasking.c
  - core_watchdog.c
  - ext_crc32.c
  - io_SPIRIT1.c
  - io_SX127x.c
  - otlib_delay.c
  - otlib_eax.c
  - otlib_memcpy.c
  - otlib_rand.c
  - otsys_mpipe_uart.c
  - otsys_mpipe_uart[old].c
  - otsys_mpipe_usbcdc.c
  - otsys_veelite_EE.c
  - stm32l1xx_flash.c
  - stm32l1xx_flash.h
  - stm32l1xx_pwr.c
  - stm32l1xx_pwr.h
  - stm32l1xx_rcc.c
  - stm32l1xx_rcc.h
- _Readme_Platforms.txt
- cmsis_rtos_notes.txt
.gitignore
_license-1.0.txt
README.md

# Installation Guide

1. Get the code

git clone https://github.com/jpnorair/OpenTag

Downloads the entire project code from GitHub to your computer.

cd OpenTag

Moves into the project folder you just downloaded.

2. Make

Medium Recommended

Prerequisites

Git Needed to download the project code from GitHub.
Make Usually pre-installed on Linux/macOS. On Windows, install separately (e.g. via MSYS2 or WSL).

⚠️ This is a large repository, so this method may point to an internal sub-package rather than the actual core product. Check the full README as well.

cd _backport_todo/apps/demo_bgwakeup/proj_ccsv5/bgwakeup/_Debug_EM430RF

This project's files live in a subfolder, so move into it first.

make

Compiles the code based on the generated build configuration to produce an executable.

✅ If it finishes without errors, it worked. Try running the generated executable directly.

OpenTag

File Explorer

# Installation Guide

2. Make

Today's picks

Was this content helpful?

Recent Feedback

OpenTag

File Explorer

# Installation Guide

2. Make

Today's picks

Was this content helpful?

Recent Feedback

Download README