KO
|
EN
gitlite — search
Search
#typescript
#ai-agents
#ai
#dsh-plugin
#deepseek-harness
#open-source
#claude-code
#codex
#cli
#developer-tools
#react
#windows
ICE-V-Wireless
★ 79
Open GitHub ↗
Combined ESP32C3 and iCE40 FPGA board
Download README (.md)
Explore Similar Repositories
developer-experience-java-kubernetes
:
Samples showing how to use different tools and patterns to improve the developer experience and optimise the inner development loop.
azure-remix-stack
:
A remix stack template for running a remix app on Azure
aws-machine-learning-university-responsible-ai
:
No description available.
better-nav
:
一个把常用网址收拾得干干净净的小站
mantine-split-pane
:
A Mantine 9 React component for resizable split pane layouts with 7 resizer variants, context-based prop inheritance, responsive orientation, and dynamic pane generation.
// repository documentation
Was this content helpful?
★ 0
(0 ratings)
Select Rating:
★
★
★
★
★
Submit Feedback
Recent Feedback
×
Download README
Do you want to download the
README.md
file for
ICE-V-Wireless
?
Download (.md)
# ICE-V Wireless Combined ESP32C3 and iCE40 FPGA board <img src="docs/ice-v_front.jpg" width="640" /> <img src="docs/ice-v_back.jpg" width="640" /> ## Abstract This project combines an Espressif ESP32-C3-MINI-1 (which includes 4MB of flash in the module) with a Lattice iCE40UP5k-SG48 FPGA to allow WiFi and Bluetooth control of the FPGA. ESP32 and FPGA I/O is mostly uncommitted except for the pins used for SPI communication between ESP32 and FPGA. Several of the ESP32C3 GPIO pins are available for additonal interfaces such as serial, ADC, I2C, etc. This project comprises both hardware, firmware, gateware and host-side communication utilities. ## Hardware The [Hardware](Hardware) directory provides the schematic and PCB layout in KiCAD 6 format. The design provides: * Three standard PMOD connectors spaced to accommodate dual-PMOD modules with all eight signal pins directly connected to the FPGA. * Many PMOD signals are available in differential pairs with the positive and negative halves on adjacent odd/even pins. * PMOD power pins can be tied either to the on-board regulated 3.3V supply (default) or to the unregulated ~4V supply (requires cutting a trace and adding a solder blob). * Additional I/O connector with seven ESP32C3 GPIO lines and one FPGA line, along with power, ground and reset connections. * 8MB PSRAM connected directly to the FPGA. * USB-C connector for power, programming and JTAG debugging of the ESP32C3. * Tactile buttons for reset and boot mode selection of the ESP32C3. * RGB LED directly driven by the iCE40 FPGA * LED indicators for power, charging, FPGA configuration and ESP32C3 software. * LiPo Battery operation and charging. * Onboard antenna for WiFi and Bluetooth. ### Pinout <img src="docs/pinout.png" width="640" /> ### Schematic A PDF of the schematic is here: [ICE-V-Wireless Schematic](docs/esp32c3_fpga_schematic.pdf) ## Firmware [](https://github.com/ICE-V-Wireless/ICE-V-Wireless/actions/workflows/build-firmware.yml) The [Firmware](Firmware) directory provides the full source for the ESP32 firmware that is loaded into the ICE-V-Wireless board from the factory. The ESP32 firmware is written in C with the ESP-IDF toolchain and librarie and provides both a USB and a TCP socket interface over WiFi with the following features: * Initial loading of the FPGA configuration at powerup from a SPIFFS filesystem contained in the ESP32C3F[H/N]4 flash. <br/>(See [Page 9 of the ESP32-C3 Series Datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf#page=9) for part number details). * USB and WiFi "instant" loading of configurations direct to the FPGA. * USB and WiFi updating of the configuration stored in SPIFFS. * USB and WiFi monitor/control of the FPGA design via SPI. * USB and WiFi monitor of LiPo battery voltage. * USB setting of WiFi credentials (SSID and Password) ## Gateware [](https://github.com/ICE-V-Wireless/ICE-V-Wireless/actions/workflows/build-gateware.yml) The [Gateware](Gateware) directory contains HDL source and build materials for the shipping FPGA demo designs as well as additional designs for learning how to use the ICE-V-Wireless. ## Host-side Utilities The [python](python) directory contains the command-line Python scripts which are provided to communicate over USB and WiFi with the default ICE-V-Wireless firmware and support the features outlined in the Firmware section above. ## Getting One ICE-V-Wireless boards are available via the GroupGets store: https://store.groupgets.com/products/ice-v-wireless US customers can purchase through Digi-Key: https://www.digikey.com/en/products/detail/groupgets-llc/ice-v-wireless/17168543 ## Getting Started If you've just gotten an ICE-V-Wireless board and want to quickly get going read the [Getting Started](Getting-Started.md) page. ## Reviews and Tutorials * [Tom Verbeure](https://tomverbeure.github.io/) has generously written a great review and tutorial for the ICE-V-Wireless board on his blog: [An In-Depth Look at the ICE-V Wireless FPGA Development Board](https://tomverbeure.github.io/2022/12/27/The-ICE-V-Wireless-FPGA-Board.html) You'll find a lot of additional detail and some clear step-by-step guides for getting tools set up to build firmware and gateware for the board. * [gojimmypi](https://gojimmypi.github.io/) has a few writeups on his blog from early-on in the board development which provide some insight into devtools and build systems plus providing some helpful links: * [ICE-V Wireless FPGA with ESP32-C3](https://gojimmypi.github.io/ICE-V-Wireless-FPGA-ESP32-C3/) * [SERV and FuseSoC for the ICE-V Wireless FPGA](https://gojimmypi.github.io/ICE-V-Wireless-SERV-fusesoc/) ## ICE-V In Use Here are a few places where the ICE-V has appeared: * [ICE-V with Nuttx for motor control](https://gitlab.fel.cvut.cz/otrees/risc-v-esp32/ice-v-pmsm) * [ICE-V with Zephyr](https://docs.zephyrproject.org/latest/boards/others/icev_wireless/doc/index.html)
