home-assistant-jablotron100

KO | EN

gitlite — search

#javascript #python #react #ai #typescript #golang #rust #windows #kubernetes #vue #pytorch #security #mcp #open-source

home-assistant-jablotron100

(★ 101)

Home Assistant custom component for JABLOTRON 100+ alarm system

home-assistant-jablotron100 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

[![hacs_badge](https://img.shields.io/badge/HACS-Default-orange.svg?style=for-the-badge)](https://github.com/hacs/default)

# Jablotron 100+

Home Assistant custom component for JABLOTRON 100+ alarm system.

Tested with JA-100K, JA-101K, JA-101K-LAN, JA-103K, JA-103KRY, JA-106K-3G, JA-107K and JA-14K.

## Features

### Sections

- States are reported to Home Assistant.
- You can arm/disarm all sections. Supported states are `arm_away` (= armed) and `arm_night`/`arm_home` (choose in options what means "armed partially" for you).
- Event `jablotron100_wrong_code` is triggered when wrong code is inserted in Home Assistant.
- Problem in a section is reported in specific "problem" sensor.

### Devices

- Devices with two states (on/off, active/inactive, open/closed etc.) are supported.
- Sabotage or problem of the device is supported in specific "problem" sensor.
- Temperature is reported for thermostats, thermometers and smoke detectors.
- Pulses are reported for electricity meters with pulse output.
- Signal strength is reported for wireless devices.
- Battery level is reported for devices with battery.

### PG outputs

- States are reported to Home Assistant.
- It's possible to turn on/off all PG outputs.

### Central unit

- Power supply state and overall problem are reported as binary sensors.
- BUS voltage and BUS devices current are reported per detected BUS.
- Battery presence, battery level, standby and load voltages are reported when the central unit has a backup battery.
- LAN connection state and (when available) the LAN IP address are reported for supported central units.
- GSM signal availability and signal strength are reported for supported central units.
- A `wrong code` event entity records failed authorisation attempts; the same condition also fires the `jablotron100_wrong_code` event on the bus.

## Before installation

1. Connect the USB cable to Jablotron central unit
2. Restart the Home Assistant OS

## Installation

- If you use code with a prefix, insert the code with the asterisk, e.g. `12*3456`.
- Use code of administrator to make devices work. If you cannot use code of administrator, or you don't want to use devices, set the number of devices to 0.
- You have to set devices in the same order as you see them in your J-Link/F-Link/mobile application. Ignore the central unit on position 0.
- If you want to use PG outputs, the user of the code has to have rights to control the PG outputs. Set the number of PG outputs to 0 to ignore them.

Serial port should be automatically detected. If not, you can detect it manually and set it during integration installation.

The default value `auto` makes the integration probe `/sys/class/hidraw` on every start and pick the device exposing the Jablotron USB vendor/product ID (`16D6:0008`). Prefer `auto` over a fixed `/dev/hidrawN` path — when other USB HID peripherals are connected to the host, the kernel's hidraw numbering can change between reboots.

```
$ dmesg | grep usb
$ dmesg | grep hid
```

The cable should be connected as `/dev/hidraw[x]`, `/dev/ttyUSB0` or similar.

### HACS

1. Install the integration via [HACS](https://hacs.xyz/) (Home Assistant Community Store)  
    <small>*HACS is a third party community store and is not included in Home Assistant out of the box.*</small>
2. Restart Home Assistant
3. Jablotron integration should be available in the integrations UI

### Manual

1. [Download integration](https://github.com/kukulich/home-assistant-jablotron100/releases/)
2. Copy the folder `custom_components/jablotron100` from the zip to your config directory
3. Restart Home Assistant
4. Jablotron integration should be available in the integrations UI

### Reconfigure

To change the serial port, code, number of devices or PG outputs without losing your existing configuration, open the integration on the *Devices & Services* page and choose *Reconfigure*. Leave the password field empty to keep the previously stored code. Per-device type assignments are preserved across reconfiguration.

## Check

1. Try to arm/disarm all sections
2. Try to activate all devices if possible (open/close door/window, move ahead of motion sensor etc.) and check if Home Assistant see the state changes
3. Check log - it should be empty when everything works
4. Does any problem occur? Report [issue](https://github.com/kukulich/home-assistant-jablotron100/issues) or join [Discord](https://discord.gg/bNmaB6n)

## Services

### `jablotron100.reset_problem`

Locally turns the selected `problem` binary sensor back to off without waiting for the central unit to clear the underlying condition. Useful for one-shot conditions that you have already acknowledged. Only entities with `device_class: problem` from this integration are accepted.

```yaml
service: jablotron100.reset_problem
target:
  entity_id: binary_sensor.section_1_problem_sensor
```

Even if everything works for you, you can join the [Discord](https://discord.gg/bNmaB6n).
We would be happy:
 - If you report model of you Jablotron central unit, so we know that integration works on another model
 - If you can test some things (e.g. LAN), so we can make the integration more robust

The communication in Discord is mostly in Czech or Slovak but don't be afraid - you can use English as well.

## Debugging
1. Enable debug logging for the Jablotron intergation via the [logger](https://www.home-assistant.io/integrations/logger/) integration by adding the following lines to the `configuration.yaml` file.
```
logger:
  default: info
  logs: 
    custom_components.jablotron100: debug
```

2. Enable debug logging in the Jablotron integration. Go to the Integration page of your Home Assistant and click on the `Configure` button belonging to the Jablotron integration and then select `Debugging` to specify specific debugging options, such as `Log all incoming packets`. Finish the configuration by pressing the `Submit` button.
3. After enabling 1. and 2., the home assistant log should contain debug log of the Jablotron integration, e.g.,
```
2022-02-17 10:57:19 DEBUG (ThreadPoolExecutor-2_0) [custom_components.jablotron100] Incoming: 801a0cffffffff010001002820010027ffffffffffffffffffffffff
2022-02-17 10:57:19 DEBUG (ThreadPoolExecutor-2_0) [custom_components.jablotron100] Incoming: 5203820113
```
4. Restart Home Assistant

## Credits

Big thanks to [plaksnor](https://github.com/plaksnor/), [Horsi70](https://github.com/Horsi70/) and [Shamshala](https://github.com/Shamshala/) for their work on previous integration.

home-assistant-jablotron100

home-assistant-jablotron100 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

home-assistant-jablotron100

home-assistant-jablotron100 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README