Salads-OSSM-Additions

KO | EN

gitlite — search

#javascript #hacktoberfest #ai #go #machine-learning #rust #deep-learning #linux #docker #macos #kubernetes #awesome-list #pytorch #mcp

Salads-OSSM-Additions

(★ 17)

Repository with all of SaladDressing's additions/revamps to the OSSM (Open Source Sex Machine).

Salads-OSSM-Additions Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

This repository has all of my additions, mods and revamps open for Download.
If you like my work, consider supporting me on [Ko-Fi](https://ko-fi.com/deepfantasies)!
# Permissions
You are welcome to edit/alter/remix, print and use the provided files freely. You are also encouraged to make additions and share them should you see the need for them. You may redistribute only your edits/remixes/alterations and additions with credits to this repo at least. If you want to print my files to sell them, ask me for permission per message first.

All of the above applies to every project here.
# Capstan OSSM XL
![IMG20251109164233](https://raw.githubusercontent.com/SaladDressingHW/Salads-OSSM-Additions/main/Capstan%20OSSM%20XL/Pictures/HG20/IMG20251109164233.jpg)
Revamp of the OSSM drive mechanism to use a capstan based version, enabling higher load use with a more powerful motor, namely the 60AIM40F.

Thread MGN12H: https://discord.com/channels/559409652425687041/1395456804464623817
Thread HG20: https://discord.com/channels/559409652425687041/1437149434143182959

# Capstan Proof of Concept
This was my first version. It is a proof of concept with quite a few flaws that I have abandoned to see if it is at all a viable concept. This is using 57AIM30 or 42AIM30 motors. You can try this first if you are sceptical to drop over a hundred bucks on a new motor. Bear in mind that quite a bit has changed since then. Changes that are not updated for this Proof of Concept. It worked good enough for me to use it, but it may not for you. The imo truly fleshed out Version is the Capstan XL.

Thread: https://discord.com/channels/559409652425687041/1331948206061256739

# 60AIM40F Motor Cover
![IMG20251109163441](https://raw.githubusercontent.com/SaladDressingHW/Salads-OSSM-Additions/main/60AIM40F%20Motor%20Cover/Pictures/IMG20251109163441.jpg)
Motor Cover for the 60AIM40F cover. Recommedned to only use with a heatsink attached to the back of the motor, where it gets really hot. Connects to armpits experimental 60AIM40F motor ring. For this, you need to replace the Nuts in the motor ring with M5x20 Coupling nuts. Then screw the Cover onto the motor with 4x M5x45 Hex Caps.

Thread: https://discord.com/channels/559409652425687041/1437144846510063636

# Double Penetration Attachment
![DP_Attachment](https://raw.githubusercontent.com/SaladDressingHW/Salads-OSSM-Additions/main/24mm%20DP%20Attachment/Pictures/DP_Attachment.jpg)
A DP Attachment for 24mm threading. Uses a 200mm 3030 Aluminium Extrusion for extra stability and two on t-nuts slidable 24mm threads. Very heavy duty, very sturdy. Recommended to use with Capstan XL HG20 version but of course not required. Hardware needed are 4x M5x10 Hex Caps for the threads, 4x M5x20 for connecting the main part to the 3030 and 8 M5 T-Nuts.

Thread: https://discord.com/channels/559409652425687041/1437143419607847083

# Quick Change Strap Toy Mount remix
![IMG20240901160629](https://github.com/user-attachments/assets/336ff1f6-5626-4435-9e18-ef7b9a235f9c)
For compatibility with smaller print beds, I remixed @arctan and @marc_o_v [Quick Change Strap Toy Mount](https://discord.com/channels/559409652425687041/1278049440787337226). It detaches the straps from the Ring. From my experience, this is very secure and only slips under high load when lube come into contact with the connection. You need TPU filament.

Thread: https://discord.com/channels/559409652425687041/1279814763257397298

# Suction Cup Bracket
![IMG20250717123257](https://github.com/user-attachments/assets/2cec80b4-ff7e-49bd-a90f-72971c7b3c5a)
A bracket to mount [these](https://de.aliexpress.com/item/1005006355052746.html?spm=a2g0o.order_list.order_list_main.4.5b3d5c5fPcSZQr&gatewayAdapt=glo2deu) suction cups to 4040 extrusion (tested with aluxprofile Type I). The suction Cups are very strong, I use a total of 4 on my shicks mount. This has the big advantage to not loose any stability that comes with the shicks mount whatsover.
Requires one suction cup and one UNC-1/4 20 5/8" screw for each bracket.

Thread: https://discord.com/channels/559409652425687041/1395419104231559361

# Weight Plate Bracket
![IMG20240901165046](https://github.com/user-attachments/assets/34b2ec6e-a550-4a15-9020-d1cc4e6f8592)
This is a bracket to mount standard 28-30mm inner diameter weight plates onto any extrusion. 2x M5x12 screws + 2x M5 T-Nuts required per Bracket

Thread: https://discord.com/channels/559409652425687041/1279819188390596669

Salads-OSSM-Additions

Salads-OSSM-Additions Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Salads-OSSM-Additions

Salads-OSSM-Additions Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README