starfive-visionfive2

KO | EN

gitlite — search

#python #hacktoberfest #ai #typescript #android #docker #macos #nodejs #cli #vue #awesome-list #pytorch #security #ios

starfive-visionfive2

(★ 9)

linux-starfive

starfive-visionfive2 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Starfive Visionfive2 Debian Image Builder

(This is currently broken, the kernel upgrade from Jan to March broke something, and the resultant image lands in emergency mode)

This is a quick way to build an sd card image for a Starfive Visionfive 2 board. The idea it to keep it as simple as possible. It uses vmdb2 to build a vanilla Debian image, eg you can be sure of provenance, rather than getting an image from a random google drive. The only things not from official Debian mirrors is the kernel and firmware. Some of the hardware might not function, but serial console and ethernet works which is all I need. Details on the build can be seen in visionfive2.yaml.

It assumes that the board already has the opensbi and u-boot firmware on the SPI storage and the board is configured to boot from SPI with vanilla settings. The v2.11.5 firmware from https://github.com/starfive-tech/VisionFive2/releases/ is stored in /boot/fw for convenience. The move from v2.10.4 to v2.11.5 increased the size of mtd0, which either means updating firmware from u-boot via tftp or runner an kernel with the updated dtd. Full instructions for updating firmeware are here: https://doc-en.rvspace.org/VisionFive2/Quick_Start_Guide/VisionFive2_SDK_QSG/updating_spl_and_u_boot%20-%20vf2.html the short version is too flashcp commands:

```
cd /boot
flashcp -v u-boot-spl.bin.normal.out /dev/mtd0
flashcp -v visionfive2_fw_payload.img  /dev/mtd1
```

The kernel is from https://github.com/starfive-tech/linux/ and was compiled from [a87c686](https://github.com/starfive-tech/linux/tree/a87c6861c6d96621026ee53b94f081a1a00a4cc7) tag: VF2_v2.11.5) on 28th March 2023
using starfive instructions and the deb-pkg target. The resultant kernel deb is in this repo and is installed during the vmdb2 run.

```
git clone git@github.com:starfive-tech/linux.git -b JH7110_VisionFive2_devel
cd linux
make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- starfive_jh7110_defconfig
make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- LOCALVERSION=-custom deb-pkg
```

There is a little work to try to build in a container, however this does not work yet, see: Dockerfile and build.sh.

A sample run looks like:
```
~/src/starfive-visionfive2 $ sudo vmdb2 --verbose --output visionfive2.img visionfive2.yaml
Load spec file visionfive2.yaml
Exec: ['dpkg', '--print-architecture']
Exec: ['qemu-img', 'create', '-f', 'raw', 'visionfive2.img', '1000M']
Exec: ['parted', '-s', 'visionfive2.img', 'mklabel', 'gpt']
Exec: ['parted', '-m', 'visionfive2.img', 'print']
Exec: ['parted', '-s', 'visionfive2.img', '--', 'mkpart', 'spl', 'ext2', '2MiB', '4MiB']
Exec: ['parted', '-m', 'visionfive2.img', 'print']
Exec: ['parted', '-m', 'visionfive2.img', 'print']
Exec: ['parted', '-s', 'visionfive2.img', '--', 'mkpart', 'uboot', 'ext2', '4MiB', '8MiB']
Exec: ['parted', '-m', 'visionfive2.img', 'print']
Exec: ['parted', '-m', 'visionfive2.img', 'print']
Exec: ['parted', '-s', 'visionfive2.img', '--', 'mkpart', 'boot', 'fat32', '8MiB', '128MiB']
Exec: ['parted', '-m', 'visionfive2.img', 'print']
Exec: ['parted', '-s', '/home/thomas/src/starfive-visionfive2/visionfive2.img', '--', 'set', '3', 'boot', 'on']
Exec: ['parted', '-m', 'visionfive2.img', 'print']
Exec: ['parted', '-s', 'visionfive2.img', '--', 'mkpart', 'root', 'ext2', '128MiB', '100%']
Exec: ['parted', '-m', 'visionfive2.img', 'print']
Exec: ['kpartx', '-asv', 'visionfive2.img']
remembering /dev/mapper/loop0p1 as spl
remembering /dev/mapper/loop0p2 as uboot
remembering /dev/mapper/loop0p3 as boot
remembering /dev/mapper/loop0p4 as root
Exec: ['/sbin/mkfs', '-t', 'vfat', '-n', 'boot', '/dev/mapper/loop0p3']
Exec: ['blkid', '-c/dev/null', '-ovalue', '-sUUID', '/dev/mapper/loop0p3']
Exec: ['/sbin/mkfs', '-t', 'ext4', '-L', 'root', '/dev/mapper/loop0p4']
Exec: ['blkid', '-c/dev/null', '-ovalue', '-sUUID', '/dev/mapper/loop0p4']
Exec: ['mount', '/dev/mapper/loop0p4', '/tmp/tmpm1ye7pn_']
Exec: ['mount', '/dev/mapper/loop0p3', '/tmp/tmpm1ye7pn_/.//boot']
Exec: ['qemu-debootstrap', '--keyring', '/usr/share/keyrings/debian-ports-archive-keyring.gpg', '--arch', 'riscv64', '--variant', '-', '--components', 'main', 'sid', '/tmp/tmpm1ye7pn_', 'http://deb.debian.org/debian-ports']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'apt-get', 'update']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'apt-get', 'update']
crypts: []
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'apt-get', 'update']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'apt-get', '-y', '--no-show-progress', '', 'install', 'eatmydata']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'eatmydata', 'apt-get', 'update']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'eatmydata', 'apt-get', '-y', '--no-show-progress', '', 'install', 'debian-ports-archive-keyring', 'initramfs-tools', 'mtd-utils', 'ssh', 'systemd-timesyncd', 'u-boot-menu', 'wget']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'apt-get', 'clean']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'sh', '-ec', 'mkdir /boot/fw /boot/dtbs\ncd /boot/fw\nwget https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v2.8.0/u-boot-spl.bin.normal.out\nwget https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v2.8.0/visionfive2_fw_payload.img\n\nwget https://raw.githubusercontent.com/thomasdstewart/starfive-visionfive2/main/linux-image-5.15.0-custom-dirty_5.15.0-custom-dirty-1_riscv64.deb\napt-get install ./linux-image-5.15.0-custom-dirty_5.15.0-custom-dirty-1_riscv64.deb\nrm linux-image-5.15.0-custom-dirty_5.15.0-custom-dirty-1_riscv64.deb\ncp /usr/lib/linux-image-5.15.0-custom-dirty/starfive/jh7110-visionfive-v2.dtb /boot/dtbs\n\necho "U_BOOT_PARAMETERS=\\"rw quiet console=ttyS0,115200 earlycon rootwait\\"" >> /etc/default/u-boot\necho "U_BOOT_ROOT=\\"root=LABEL=root\\""                                       >> /etc/default/u-boot\necho "U_BOOT_FDT=\\"dtbs/jh7110-visionfive-v2.dtb\\""                          >> /etc/default/u-boot\nu-boot-update']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'sh', '-ec', 'echo "visionfive2" > /etc/hostname\necho "nameserver 8.8.8.8" > /etc/resolv.conf']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'sh', '-ec', 'systemctl enable generate-ssh-host-keys.service']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'sh', '-ec', 'echo "starfive\\nstarfive\\n" | passwd root\necho "starfive\\nstarfive\\n" | adduser --comment user user']
Exec: ['chroot', '/tmp/tmpm1ye7pn_', 'sh', '-ec', 'rm -rf /var/lib/apt/lists\nrm -f /etc/machine-id /var/lib/dbus/machine-id\nrm -f /etc/ssh/ssh_host_*_key*']
WARNING:root:Not mounted: /tmp/tmpm1ye7pn_/.//boot
Exec: ['zerofree', '-v', '/dev/mapper/loop0p4']
Exec: ['kpartx', '-dsv', 'visionfive2.img']
Exec: ['losetup', '--json', '-l', '/dev/loop0']
All went fine.
~/src/starfive-visionfive2 $
```

The resultant img can then be copied to an sd card
```
$ ls -la visionfive2.img 
-rw-r--r-- 1 root root 1000M Feb  7 10:05 visionfive2.img
$ sudo dd bs=1M if=visionfive2.img of=/dev/sdA
$ sudo parted /dev/sdA
```

https://github.com/agreenbhm/linux/tree/master/.github/workflows

starfive-visionfive2

starfive-visionfive2 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

starfive-visionfive2

starfive-visionfive2 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README