KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#typescript #ai-agents #cli #open-source #ai #claude-code #codex #developer-tools #deepseek-harness #dsh-plugin #react #windows

Adafruit_Python_WS2801

★ 41 Open GitHub ↗

Python code to control WS2801 and similar SPI interface addressable RGB LED strips on a Raspberry Pi & BeagleBone Black.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Adafruit Python WS2801 (DEPRECATED)

This library has been archived and replaced by a new library that is Python 3 compatible and works with a wide range of Linux/hardware

https://github.com/adafruit/Adafruit_CircuitPython_WS2801

This library is no longer supported. Please use the new library

## Adafruit Python WS2801
Python code to control WS2801 and similar SPI interface addressable RGB LED strips on a Raspberry Pi &amp; BeagleBone Black.

## Installation

To install the library from source (recommended) run the following commands on a Raspberry Pi or other Debian-based OS system:

sudo apt-get install git build-essential python-dev
    cd ~
    git clone https://github.com/adafruit/Adafruit_Python_WS2801.git
    cd Adafruit_Python_WS2801
    sudo python setup.py install

Alternatively you can install from pip with:

sudo pip install adafruit-ws2801

Note that the pip install method **won't** install the example code.

## Pin numbering

The library (and the sample code) use the Broadcom BCM GPIO pin numbering scheme, rather than the physical pin numbering scheme. The [Adafruit T-Cobbler breakout board](https://www.adafruit.com/products/1754), for example, uses the BCM scheme. See [https://pinout.xyz](https://pinout.xyz/) for a quick-reference image.

Adafruit_Python_WS2801

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README