smk-37-pro-docs

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

smk-37-pro-docs

(★ 25)

Documentation repository for M-Vave SMK 37 Pro

smk-37-pro-docs 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# M-VAVE SMK-37 PRO

## About

SMK 37 Pro is a MIDI keyboard master controller with a FM engine sound source compatible with Yamaha DX7 tone generator.

ATTENTION: There are some variations of SMK 37 Pro: SMK 37 Elite, MKE-P37 and Donner Starrykey 37 Play. Inspecting their v15 firmwares, I've found different binary.

[https://www.m-vave.com/productinfo/1431195.html](https://www.m-vave.com/productinfo/1431195.html)

Documentation repository for M-Vave SMK 37 Pro

## Official Docs

* <a href="https://www.cuvave.com/productinfo/1431195.html" target="_blank">Product Page - SMK-37 Pro</a>
* [User Manual](manual/smk-37-pro-user-manual.pdf)
* [DAW Setup Manual](manual/smk-37-pro-daw-setup-manual.pdf)

## Jieli Stuffs

* [How to identify Jieli chips](https://www.reddit.com/r/diyelectronics/comments/1dxwom5/how_to_identify_jieli_jl%CF%80_bluetooth_chips)

## Hardware

* DAC: [Cirruc Logic CS4344-CZZR](https://br.mouser.com/datasheet/3/75/1/CS4344_45_48_F2.pdf)
  * Multi-bit Delta-Sigma Modulator
  * 24-bit Conversion
  * Automatic Sample Rate up to 192 kHz
  * 105 dB Dynamic Range
  * -90 dB THD+N
  * Low Clock-Jitter Sensitivity
  * Single +3.3 or +5 V Power Supply
  * Filtered Line-Level Outputs
  * On-Chip Digital De-emphasis
  * Popguard Technology
  * Small 10-pin TSSOP Package
 
* Li-Ion Battery Charger: [AIP4056 -> TP4056](https://datasheet.lcsc.com/lcsc/1809261820_TOPPOWER-Nanjing-Extension-Microelectronics-TP4056-42-ESOP8_C16581.pdf)
  * Programmable Charge Current Up to 1000mA
  * No MOSFET, Sense Resistor or Blocking Diode Required
  * Complete single-cell linear Li-Ion battery charger in ESOP8/EMSOP8 Package
  * Constant-Current/Constant-Voltage operation with thermal regulation
  * Preset 4.2V Charge Voltage with 1% Accuracy
  * Automatic Recharge
  * Automatic End-of-charge control
  * UVLO
  * Two Charge Status Output Pins
  * C/10 Charge Termination
  * 55uA Charge Current in Standby Mode
  * 2.9V Trickle Charge Threshold
  * Soft-Start Limits Inrush Current
  * 8-Lead ESOP /EMSOP Package

* ~SoC JieLi C108221-11B8 ([LarsLinux93](https://gist.github.com/probonopd/18b3ed65a69d0229eb630c47d7e316dc?permalink_comment_id=5739103#gistcomment-5739103))~
* SoC JieLi AC7911B8 ([EdCo](https://www.sequencer.de/synthesizer/threads/m-vave-smk-37-pro-midi-controller-mit-eingebauter-dx7-engine-und-sequenzer.175956/page-3#post-2980924))
  * Documentation: https://doc.zh-jieli.com/AC79/zh-cn/release_v1.2.0/
  * SDK: https://gitee.com/Jieli-Tech/fw-AC79_AIoT_SDK | https://gitee.com/Jieli-Tech/fw-AC79_AIoT_SDK
  * [https://kagaimiq.github.io/jielie/chips/](https://kagaimiq.github.io/jielie/chips/) 
  * <a href="https://www.axtekic.com/web/uploads/file/20230313/gNZPgyZMJ87VB3CB0873B102SR6868n8.pdf" target="_blank">Datasheet</a>
  * 32-bit RISC CPU
    * Double core RISC 32-bit CPU(Support FPU)
    * 24KB D-Cache 6 way, 32KB I-Cache 8way
    * DC-320MHz operation
    * 128 Vectored interrupts
    * Four Levels interrupt priority
  * 8Mbit Flash
  * Bootloader: [Bootloader wl82](https://github.com/Jieli-Tech/fw-Bootloader/tree/main/user_boot/cpu/wl82)
  * Image Signal Processor
    * Support DVP and BT656 interface timing
    * Support YUV422 format (Input)
    * Support YUV422 and YUV420 format (Output)
    * Support 720p@30fps input size
  * Flexible I/O
    * 28 GPIO pins
    * All GPIO pins can be programmable as input
    * or output individually
    * All GPIO pins are internal pull-up/pull-down selectable individually
    * CMOS/TTL level Schmitt triggered input
    * External wake up/interrupt on all GPIOs
  * Peripheral Feature
    * FUSB 1.1 OTG controller
    * Audio interface supports IIS, left adjusted,
    * right adjusted and DSP mode
    * Multi-function 32-bit timers, support capture and PWM mode
    * 16-bit PWM generator for motor driving
    * Three full-duplex advanced UART
    * Three SPI interface supports host and device mode
    * Two SD Card Host controller
    * One IIC interface supports host and device mode
    * One SPDIF receiving interface without analog amplify
    * Quadrate decoder
    * Watchdog
    * One Crystal Oscillator
    * One channel 16-bit DAC with headphone amplifier
    * Four channels Audio 16-bit ADC
    * Four channels MIC amplifier
    * Four channels analog MUX
    * Ten channels 10-bit ADC
    * Power-on reset
    * Embedded PMU support low power mode
  * Bluetooth Feature
    * CMOS single-chip fully-integrated radio and baseband
    * Compliant with Bluetooth V5.0+BR+EDR+
    * BLE specification
    * Bluetooth Piconet and Scatternet support
    * Meet class2 and class3 transmitting power requirement
    * Support GFSK and π/4 DQPSK all paket types
    * Provides +15dbm transmitting power
    * Receiver with -93dBm sensitivity
    * Support a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\rfcomm\sdp\l2cap profile
  * WIFI Feature
    * Support all mandatory IEEE 802.11b data rates of 1, 2, 5.5 and 11 Mbps, all 802.11g payload data rates of 6, 9, 12, 18, 24, 36, 48 and 54 Mbps, as well as 802.11n MCS0~MCS7, MCS32, 20MHz/40MHz BW, 800ns and 400ns guard interval.
    * Support advanced 1x1 802.11n features:
      * Full / Half Guard Interval
      * Frame Aggregation
      * Reduced Inter-frame Space (RIFS)
      * Space Time Block Coding (STBC)
      * Greenfield mode
    * Support WEP/WPA-PSK(TKIP/CCMP)/WPA2-PSCK/AES256/AES128/SHA256/SHA128
    * Support apply to AP/STA
    * Transmitter power:
      * DSSS 1M/S 17 dBm
      * MCS0 16 dBm
      * MCS7 13 dBm
    * Receiver sensitivity:
      * DSSS 1M/S -95 dBm
      * MCS0 -92 dBm
      * MCS7 -74 dBm
    * Packages
      * QFN48(6mm*6mm)
    * Temperature
      * Operating temperature: -40℃ to +85℃
      * Storage temperature: -65℃ to +150℃
        
## Specifications

* Five colors available: White, Black, Pink, Red and Full Black
* 37 Keys with velocity-sensitive
* 16 RGB backlight pads with velocity and aftertouch
* 1.54" LCD Display
* Pitch and modulation wheels
* Eight 360-degree rotary encoders
* Four faders
* Step sequencer, smart chord, arpeggiator and note repeat function
* MIDI TRS Out Type A
* MIDI and Audio interface over USB C
* Stereo audio output (TRS)
* 1x sustain/expression 6.35mm (1/4") Pedal input standard jack
* MIDI over bluetooth 5.0
* 2000mAh battery
* Windows/MacOS/iOS/iPadOS/Android compatible
* Dimensions: TO-DO
* In the box: SMK 37 Pro, USB C -> USB A Cable, User manual

## Images

[Official and web images](images/IMAGES.md)

## Videos

<a href="https://www.youtube.com/playlist?list=PLYwLyF01evmMiaq1pv3QuYgvn-m5aVVDD" target="_blank">Official Youtube Playlist</a>

## Internal Synthesis Engine

*# FM Synth 
    * Six FM Operators, fully compatible with Yamaha DX7 MK1 (with some issues and glitches)
    * Feedback
    * 32 algorythm
    * Mono/Poly
    * FX: Cutoff, distortion, reverb, delay
* FX
    * Cutoff, distortion, reverb, delay
* Polyphony: 12 notes

## Software and Apps

* Device Editor
  * [MidiSuite for Windows](https://yms-file-store.oss-cn-hongkong.aliyuncs.com/software/pc/MidiSuite.zip)
  * [MidiSuite for MacOS](https://yms-file-store.oss-cn-hongkong.aliyuncs.com/software/pc/MidiSuite.dmg)
  * <a href="https://apps.apple.com/us/app/midi-suite/id6737530581" target="_blank">MidiSuite for iOS/ipadOS</a>
  * [MidiSuite for Android](https://resource.m-vave.com/software/app/MidiSuite.apk)
* Firmware Upgrade
  * [M-Upgrade for Windows](https://yms-file-store.oss-cn-hongkong.aliyuncs.com/software/pc/M-UPGRADE.zip)
  * [M-Upgrade for MacOS](https://yms-file-store.oss-cn-hongkong.aliyuncs.com/software/pc/M-UPGRADE.dmg)
* Bluetooth MIDI Connector
  * [Sinco Connector for Windows](https://yms-file-store.oss-cn-hongkong.aliyuncs.com/software/pc/Sinco_Connector.exe)

## SYSEX

[SYSEX Page (thanks to Mitch L)](sysex/SYSEX.md)

## Firmware ([thanks to probonopd](https://gist.github.com/probonopd/18b3ed65a69d0229eb630c47d7e316dc))

[Firmware versions](firmware/FIRMWARE.md)

## Known bugs and errors/issues (to review after v15 FW)

* [Wheels stop working after factory reset](https://www.reddit.com/r/synthesizers/comments/1kz1m4a/mvave_smk37_pro_pitchmod_wheel_not_working_after/)
* [minor error in Scale World II](https://www.youtube.com/watch?v=I4OdTniRRtU)
* [BUG MIDI channel Seq Drum mode](https://www.youtube.com/watch?v=DHvQLDJARNc)
* Some latency found and appears to be related to power saving (not fixed until firmware 1.10 (v13)

## Hacking ([Thanks to probonopd](https://gist.github.com/probonopd/18b3ed65a69d0229eb630c47d7e316dc))

The firmware update file has the extension `.fwsc` and contains strings that make it seem probable that it uses a scheme similar (or identical) to what is described in [https://kagaimiq.github.io/jielie/datafmt/newfw.html](https://kagaimiq.github.io/jielie/datafmt/newfw.html).

```
git clone https://github.com/kagaimiq/jl-misctools
python3 -m pip install crcmod
python3 jl-misctools/firmware/fwunpack_newfw.py /mnt/c/Users/User/Downloads/*fwsc
#
# /mnt/c/Users/User/Downloads/SMK-37 Pro_012.fwsc
#

--- UFW file ---
 chip name: "AC791N"
Firmware base is at @0
  Burner size....: 544
  VID............: b'0.01'
  Flash size.....: $0FF000
  FS version.....: 16
  Block alignment: 16
  Special option.: $FF
  PID............: b'AC791N_STORY\xff\xff\xff\xff'
(top) <JLFS Entry @00000020 - 71C8 @000000A0/000000A0 (     14384/     14384) - 00/00 / 0 -- "uboot.boot">
(top) <JLFS Entry @00000040 - 70D5 @000038D0/000038D0 (       699/       699) - 02/80 / 0 -- "isd_config.ini">
Firmware chipkey from isd_config.ini: 980F
(top) <JLFS Entry @00000060 - FFFF @00004000/00004000 (4294967295/4294967295) - 81/FF / 0 -- "app_dir_head">
(top) <JLFS Entry @00000080 - FFFF @000FF000/000FF000 (      4096/      4096) - 12/01 / 65535 -- "key_mac">
Using chipkey: $980F
(App Area Head) <JLFS Entry @00004000 - BC2A @02000120/00004020 (    616499/    616467) - 83/FF / 0 -- "app_area_head">
Entry point address: 0x2000120
(App) <JLFS Entry @00004020 - CB2D @00000120/00004120 (    615828/    615828) - 82/FF / 0 -- "app.bin">
(App) <JLFS Entry @00004040 - 2E75 @000966B4/0009A6B4 (       383/       383) - 82/FF / 0 -- "cfg_tool.bin">
(App) <JLFS Entry @00004060 - FFFF @0009C000/000A0000 (    147456/    147456) - 12/81 / 0 -- "VM">
(App) <JLFS Entry @00004080 - FFFF @00000000/00004000 (    638976/    638976) - 92/82 / 0 -- "PRCT">
(App) <JLFS Entry @000040A0 - FFFF @000C0000/000C4000 (      4096/      4096) - 92/82 / 0 -- "BTIF">
(App) <JLFS Entry @000040C0 - FFFF @000C1000/000C5000 (      4096/      4096) - 92/81 / 0 -- "USRTRIM">
(App) <JLFS Entry @000040E0 - FFFF @000C2000/000C6000 (    167936/    167936) - 92/81 / 0 -- "USRFLASH">
(App) <JLFS Entry @00004100 - FFFF @000F4000/000F8000 (     40960/     40960) - 92/81 / 1 -- "USR">
(Res) <JLFS Entry @0009A833 - ABBD @00000020/0009A853 (      2937/      2905) - 83/FF / 1 -- "cfg">
====> <JLFS Entry @0009A853 - 017D @00000040/0009A873 (      2873/      2873) - 82/FF / 1 -- "eq_cfg_hw.bin">
```

* Strings like `btstack_lowpwer_deal` possibly suggest https://github.com/Jieli-Tech/fw-AC63_BT_SDK/ (or similar) being used?
* Possbly JL_AC79_DevKit V1.0 is the development environment?
* https://doc.zh-jieli.com/AC79/zh-cn/master/board_description/board_overview/index.html

smk-37-pro-docs

smk-37-pro-docs 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

smk-37-pro-docs

smk-37-pro-docs 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README