dram_emfi
playing with DDR DRAM bus fault injection
파일 탐색기
최종 버전 다운로드 (.zip)- dropwrite.c
- Kbuild
- .gitignore
- cpython_uaf.py
- detect_dropped_writes.py
- fault_qemu.sh
- linux_x86_64_lpe.c
- lpe_lkm.c
- Makefile
- memtest_writedrops.c
- qemu.sh
- run_lkm.sh
- simulate_dropped_write.py
- cache_line_probe.js
- graph.js
- index.html
- page_probe.js
- util.js
- gimme_shell.c
- linux_syscall_support.h
- Makefile
- linux_syscall_support.h
- Makefile
- ptrace_shell.c
- shellcode_aarch64.S
- shellcode_x86_64.S
- start_aarch64.S
- start_x86_64.S
- .gitignore
- android_aarch64_lpe.c
- android_aarch64_physmem_dump.c
- ddr3_dq7.py
- LICENSE
- linux_syscall_support.h
- linux_x86_64_lpe.c
- Makefile
- memtester.c
- README.md
- simulate_ddr3_dq7_fault.py
# 설치 가이드
1. 코드 내려받기
git clone https://github.com/DavidBuchanan314/dram_emfi
깃허브에서 프로젝트 코드 전체를 내 컴퓨터로 내려받습니다.
cd dram_emfi
방금 내려받은 프로젝트 폴더 안으로 이동합니다.
2. Make
보통 추천사전 준비물
- Git GitHub에서 프로젝트 코드를 내려받으려면 필요합니다.
- Make Linux/macOS는 보통 기본 설치되어 있습니다. Windows는 별도 설치(예: MSYS2, WSL)가 필요합니다.
make
생성된 빌드 설정을 바탕으로 실제 컴파일을 진행해 실행 파일을 만듭니다.
에러 없이 끝나면 성공입니다. 생성된 실행 파일을 직접 실행해보세요.
// repository documentation
Was this content helpful?
(0 ratings)
