KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #typescript #developer-tools #claude-code #ai-agent #codex #deepseek-harness #ai-agents #cli #react #mcp

flipper-zero-internal-esp32

★ 52 Open GitHub ↗

The repository provides a guide on how to install an ESP32 inside a Flipper Zero and utilize the Marauder without requiring an additional expansion board.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

<div align="center">
  <img src="https://avatars.githubusercontent.com/u/176677387" width="150" height="auto" />
  <h1> ⚡ Installing ESP32 Inside Flipper Zero ⚡ </h1>
</div>

-----

Welcome to the **ESP32 Installation Guide** for Flipper Zero! 🎉  
This repository will demonstrate how to install an ESP32 inside the Flipper Zero.

## 📚 Table of Contents
- [🚀 What Will This Bring Me?](#-what-will-this-bring-me)
- [🛠️ What Types of Boards Would Be Suitable?](#️-what-types-of-boards-would-be-suitable)
- [📋 list of components.](#️-list-of-components)
- [🧑‍🔧 Let's Get Started with Soldering!](#-lets-get-started-with-soldering)
- [🎉 final outcome](#-final-outcome)
- [❤️ Support the project](#-support-the-project)
- [⭐ Star History](#-star-history)

-----

## 🚀 What Will This Bring Me?
The ESP32 is a module that operates with Wi-Fi and Bluetooth. When connected to the Flipper Zero, it enables various attacks such as deauthentication, handshake capturing, and many other possibilities.

-----

## 🛠️ What Types of Boards Would Be Suitable?
| Board Type          | Compatibility |
|---------------------|---------------|
| esp32-wroom-32      | ✅            |
| esp8266             | ➕➖          |
| esp32-C3 supermini  | ❌           |

*Note: If you're using the ESP8266, you won't be able to access certain features, such as handshake capture.*

-----
## 📋 list of components.
![ESP32-WROOM-32](https://raw.githubusercontent.com/W0rthlessS0ul/flipper-zero-internal-esp32/main/esp32-wroom.png)

[esp32-wroom-32](https://sl.aliexpress.ru/p?key=G8OasiD)

![transformer](https://raw.githubusercontent.com/W0rthlessS0ul/flipper-zero-internal-esp32/main/transformer.png)

[Transformer from 5V to 3.3V](https://sl.aliexpress.ru/p?key=HQOas0q)

-----
## 🧑‍🔧 Let's Get Started with Soldering!
However, please remember that the author bears no responsibility for any potentially damaged boards; you undertake all actions at your own risk!

1. To start, you need to desolder the metal cover from your ESP32 (or ESP8266).  
   ![esp32 metal cover](https://raw.githubusercontent.com/W0rthlessS0ul/flipper-zero-internal-esp32/main/esp32_cover.png)

2. Now, open the Flipper Zero and disassemble it down to the main board with the display and buttons. For a detailed example of how to do this, refer to the article provided: [article](https://habr.com/ru/articles/599791/)

3. Now, arrange the ESP32 and the 5V to 3.3V converter on the motherboard.  
   ![esp32_install](https://raw.githubusercontent.com/W0rthlessS0ul/flipper-zero-internal-esp32/main/esp32_install.png)

4. Now, please solder the ESP32 converter to the Flipper Zero as shown.

| esp32 | flipper |
|-------|---------|
|  TX   |  RX     |
|  RX   |  TX     |

| esp32 | converter |
|-------|-----------|
|3.3V   |Vo         |
|GND    |GND        |

| flipper | converter |
|---------|-----------|
|GND      |GND        |
|5V       |Vi         |

5. Now, we need to connect GPIO 0 to GND using tweezers or a wire on the ESP32. Then, switch to the ESP32 flasher on the Flipper and select the Marauder firmware to install.

6. Now, assemble the Flipper and, by entering the [ESP32]WiFi Marauder, you will be able to utilize the ESP32.

-----
## 🎉 final outcome
![final outcome](https://raw.githubusercontent.com/W0rthlessS0ul/flipper-zero-internal-esp32/main/final_outcome.png)

![final outcome2](https://raw.githubusercontent.com/W0rthlessS0ul/flipper-zero-internal-esp32/main/final_outcome2.png)

-----
## ❤️ Support the project
If you would like to show your support, you can star my repository or follow me! If you appreciate this project, consider buying me a cup of coffee to keep the energy flowing! ☕ Thank you for your support!

**BTC Address:** `bc1qvul4mlxxw5h2hnt8knnxdrxuwgpf4styyk20tm`

**ETH Address:** `0x5c54eAb2acFE1c6C866FB4b050d8B69CfB1138Af`

**LTC Address:** `LbdzCsYbxuD341raar6Cg1yKavaDq7fjuV`

**XRP Address:** `rKLLPzoBGfqY3pAQPwTFPRYaWjpHSwHNDw`

**ADA Address:** `addr1qyz2aku0ucmxqnl60lza23lkx2xha8zmxz9wqxnrtvpjysgy4mdcle3kvp8l5l7964rlvv5d06w9kvy2uqdxxkcryfqs7pajev`

**DOGE Address:** `DBzAvD62yQUkP4Cb7C5LuFYQEierF3D3oG`

Every donation you make is deeply appreciated and will help in the ongoing development of this project!

-----

## ⭐ Star History

flipper-zero-internal-esp32

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README