submode.nvim

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 71)

Create your own submode

submode.nvim 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# :wrench: submode.nvim

This plugin provide apis to create a submode and manipulate it.

These apis can be used on-the-fly: no need to call config that other plugin need.

## :warning: Warning

This plugin is in development stage and breaking changes may occure to apis. We recommend you to pin version for prevent unexpected change.

## :clipboard: Requirements

- Neovim >= 0.10.0

## :notebook: Introduction

This plugin allow users to create submode, which has almost same keymaps as the parent mode like normal, insert, etc, but some keymaps is changed and is defined by user.

### :rocket: Create a submode

For example, when we try to move around windows, we need to press `<C-w>h`, `<C-w>j`, `<C-w>k` and `<C-w>l` multiple times.
Therefore, it would be useful to be able to move window with `hjkl`.

Fortunately, you can define such submode as follow.

```lua
local submode = require("submode")
submode.create("WinMove", {
    mode = "n",
    enter = "<Leader>r",
    leave = { "q", "<ESC>" },
    default = function(register)
        register("h", "<C-w>h")
        register("j", "<C-w>j")
        register("k", "<C-w>k")
        register("l", "<C-w>l")
    end
})
```

This submode has default mappings `hjkl` for moving around windows, and you can enter this submode by pressing `<Leader>r` when in normal mode. Once you enter this submode, you can use `hjkl`. You can leave from this submode by pressing `q` or `escape`, and after that `hjkl` cannot be used to move windows anymore.

### :mag: Extend exists submode

Next, sometimes you may want to add a mappings to exist submode to extend the behavior of the submode. Is it possible in this plugin? The answer is yes.

For example, you have a submode defined as follow.

```lua
local submode = require("submode")
submode.create("test", {
    mode = "n",
    enter = "]",
    leave = { "q", "<ESC>" },
    default = function(register)
        register("1", function() vim.notify("1") end)
    end,
})
```

If you want to add `2` to notify `2`, you can achieve it with the following code.

```lua
submode.set("test", "2", function() vim.notify("2") end)
```

This interface is compatible with `vim.keymap.set`, so you can easily define mappings the way you are used to.

Just as neovim provides `vim.keymap.del`, this plugin provides its compatible interface: `submode.del`. You can use it like as `vim.keymap.set`.

```lua
submode.del("test", "2")
```

One additional notable point is that default mappings created by `submode.create` doesn't change even if `submode.set` and `submode.del` is called in the order.

For example, if we call `submode.set("test", "1", "")`, this disable the behavior of `1` in `test`, but if we call `submode.del("test", "1")` after that, pressing `1` will notify `1`.

### :pinching_hand: Use different of `submode.create` and `submode.set`

We introduced two type of mappings: default mappings defined by `submode.create` and mappings defined by `submode.set`. So, how to use different?

The first is intended to provide a default mappings to user by submode creator, and second intended that user extend exist submode provided by someone.

As far as personal use, you can use either of way freely.

For example, the submode `WinMove` also can be defined as follow:

```lua
local submode = require("submode")
submode.create("WinMove", {
    mode = "n",
    enter = "<Leader>r",
    leave = { "q", "<ESC>" },
})
submode.set("WinMove", "h", "<C-w>h")
submode.set("WinMove", "j", "<C-w>j")
submode.set("WinMove", "k", "<C-w>k")
submode.set("WinMove", "l", "<C-w>l")
```

If you created a plugin and want to provide a submode using this, it is preferred `submode.create` to define mappings as it allow user to override default mappings or remove overrided mappings to restore default mappings.

## :inbox_tray: Installation

With [lazy.nvim](https://github.com/folke/lazy.nvim)

```lua
return {
    "pogyomo/submode.nvim",
    lazy = true,
    -- (recommended) specify version to prevent unexpected change.
    -- version = "6.0.0",
}
```

## :bulb: Examples

- Submode to switch to lsp-related keymaps.

```lua
local submode = require("submode")

submode.create("LspOperator", {
    mode = "n",
    enter = "<Space>l",
    leave = { "q", "<ESC>" },
    default = function(register)
        register("d", vim.lsp.buf.definition)
        register("D", vim.lsp.buf.declaration)
        register("H", vim.lsp.buf.hover)
        register("i", vim.lsp.buf.implementation)
        register("r", vim.lsp.buf.references)
    end,
})
```

- Enable keymaps which is appropriate for reading help when open help.

```lua
local submode = require("submode")

submode.create("DocReader", {
    mode = "n",
    default = function(register)
        register("<Enter>", "<C-]>")
        register("u", "<cmd>po<cr>")
        register("r", "<cmd>ta<cr>")
        register("U", "<cmd>ta<cr>")
        register("q", "<cmd>q<cr>")
    end,
})

vim.api.nvim_create_augroup("DocReaderAugroup", {})
vim.api.nvim_create_autocmd("BufEnter", {
    group = "DocReaderAugroup",
    callback = function()
        if vim.opt.ft:get() == "help" and not vim.bo.modifiable then
            submode.enter("DocReader")
        end
    end,
})
vim.api.nvim_create_autocmd({ "BufLeave", "CmdwinEnter" }, {
    group = "DocReaderAugroup",
    callback = function()
        if submode.mode() == "DocReader" then
            submode.leave()
        end
    end,
})
```

## :date: User Events

The following user events will be triggered.

- `SubmodeEnterPre` 
    - Emitted when `submode.enter` called and before process anything.
    - `data` attribute will hold `name` for corresponding submode name.
- `SubmodeEnterPost` 
    - Emitted when `submode.enter` called and after all process done.
    - `data` attribute will hold `name` for corresponding submode name.
- `SubmodeLeavePre` 
    - Emitted when `submode.leave` called and before process anything.
    - `data` attribute will hold `name` for corresponding submode name.
- `SubmodeLeavePost` 
    - Emitted when `submode.leave` called and after all process done.
    - `data` attribute will hold `name` for corresponding submode name.
 
You can use these events with the following code:

```lua
vim.api.nvim_create_autocmd("User", {
    group = vim.api.nvim_create_augroup("user-event", {}),
    pattern = "SubmodeEnterPre", -- Name of user events
    callback = function(env)
        vim.notify("SubmodeEnterPre fired")
        vim.notify(string.format("submode: %s", env.data.name))
    end
})
```

## :desktop_computer: APIS

- `create(name, opts, default)`
    - Create a new submode.
    - `name: string` Name of this submode.
    - `opts: table` Options of this submode. Have the following fields.
        - `mode: string` Parent mode of this submode like `"n"`, `"v"`, etc.
        - `show_mode?: boolean` False to suppress `mode()` returns the submode name.
        - `mode_name?: string | fun(): string` Change the value `mode()` returns.
        - `enter?: string | string[]` Keys to enter to this submode.
        - `leave?: string | string[]` Keys to leave from this submode.
        - `hook: table` Holds callbacks called on specific timing.
            - `on_enter: fun()` Executed on same timing as `SubmodeEnterPost`.
            - `on_leave: fun()` Executed on same timing as `SubmodeLeavePost`.
        - `default?: function` Callback to register default mappings. Take a following value:
            - `register: fun(lhs: string, rhs: string | function, opts?: table)` When called, this callback register given default mapping to this submode.
        - `leave_when_mode_changed?: boolean` Whether leave from current submode or not when parent mode is changed i.e. changed normal mode to visual mode. Default is false.
        - `override_behavior?: string` Behavior when the submode already exist. Accept following strings.
            - `"error"` Throw error. This is default.
            - `"keep"` Keep current submode.
            - `"override"` Override old submode.
    - `default?: function` Same functional as `opts.default`. This will be removed in future.

- `set(name, lhs, rhs, opts)`
    - Add a mapping to `name`. Same interface as `vim.keymap.set`.
    - `name: string` Name of target submode.
    - `lhs: string` Lhs of mapping.
    - `rhs: string | fun():string?` Rhs of mapping. Can be function.
    - `opts?: table` Options of this mapping. Same as `opts` of `vim.keymap.set`.

- `del(name, lhs, opts)`
    - Delete a mapping from `name`. Same interface as `vim.keymap.del`.
    - `name: string` Name of target submode.
    - `lhs: string` Lhs of mapping.
    - `opts?: table` Options for this deletion. Same as `opts` of `vim.keymap.del`.

- `enter(name)`
    - Enter the submode. This function only have effect if parent mode of the submode is same as current mode.
    - `name: string` Name of submode to enter.

- `leave()`
    - Leave from current submode. Nothing happen when we are not in submode.

- `mode(): string | nil`
    - Get current submode's name. Returns nil if not in submode, or `show_mode` is `false`.

submode.nvim

submode.nvim 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

submode.nvim

submode.nvim 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README