moebot-hass-integration

KO | EN

gitlite — search

#ai #typescript #go #golang #android #machine-learning #linux #docker #windows #awesome #cli #kubernetes #vue #ios

moebot-hass-integration

(★ 16)

A HomeAssistant integration for MoeBot (and compatible) TUYA mowers.

moebot-hass-integration 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# MoeBot Home Assistant Integration

Provides the following:

- A [Lawn Mower](https://www.home-assistant.io/integrations/lawn_mower/) component for control of your MoeBot.
- Further controls to manage whether the MoeBot continues to mow during rain and how long to mow for.
- Ability to alter the multi-zone configuration of the mower (these entities are disabled by default). 
- Sensors to monitor the working state, errors and battery level of the MoeBot

## Installation

Easiest install is via [HACS](https://hacs.xyz/)

[![Open your Home Assistant instance and open a repository inside the Home Assistant Community Store.](https://my.home-assistant.io/badges/hacs_repository.svg)](https://my.home-assistant.io/redirect/hacs_repository/?owner=Whytey&repository=https%3A%2F%2Fgithub.com%2FWhytey%2Fmoebot-hass-integration&category=integration)

1. Add the repository to your HACS install by clicking the button below:
1. Restart HA

For manual installation for advanced users, copy `custom_components/moebot` to your `custom_components` folder in Home Assistant then continue from step 2 above.

## Adding the Integration

Once you have installed the integration (per above)...
1. Open the Home Assistant web interface.
1. Navigate to "Configuration" > "Integrations".
1. Click on the "+" button in the bottom right corner to add a new integration.
1. Search for the "MoeBot" integration and select it from the list.
1. Enter the required details; Device ID, IP address and [Local Key](https://github.com/make-all/tuya-local?tab=readme-ov-file#finding-your-device-id-and-local-key)
1. Click on "Submit" to complete the integration setup.

### Configuration Options
```mermaid
flowchart TD
    START(Start) --> USER{Menu}
    USER -->|Cloud| CLOUD[Cloud Credentials]
    USER -->|Local| LOCAL_LOOKUP[Scan Network]
    USER -->|Manual| DEVICE_DETAILS
    CLOUD -->|"{region, api_secret, api_key}"| CLOUD_LOOKUP[Pull Cloud Devices]
    CLOUD_LOOKUP --> DEVICE_SELECT[Select Found Devices]
    LOCAL_LOOKUP --> DEVICE_SELECT
    DEVICE_SELECT --> DEVICE_DETAILS[Confirm Details]
    DEVICE_DETAILS -->|"{device_id, ip_address, local_key, tuya_version}"| END(End)
```

## Documentation

### Lawn Mower States

The [Lawn Mower](https://www.home-assistant.io/integrations/lawn_mower/) component as provided by Home Assistant only provides [3 states](https://github.com/home-assistant/core/blob/c8a6c6a5c17f8633653fc0eaabcf00b727772335/homeassistant/components/lawn_mower/const.py#L6):
1. `ERROR` - Device is in error state, needs assistance.
2. `PAUSED` - Paused during activity.
3. `MOWING` - Device is mowing.
4. `DOCKED` - Device is docked.

The MoeBot however provides many more states:
1. `STANDBY` - the MoeBot is not mowing; it is either sitting idle in the mowing area or sitting in the dock fully charged.
2. `MOWING` - the MoeBot is mowing.
3. `FIXED_MOWING` - the MoeBot is mowing in a spiral pattern.
4. `CHARGING` - the MoeBot is in the dock charging.
5. `EMERGENCY` - the MoeBot is in some non-normal state, perhaps lifted off the ground.
6. `LOCKED` - the MoeBot UI is asking for the PIN to be entered.
7. `PAUSED` - the MoeBot is currently mowing but the job has been paused.
8. `PARK` - the MoeBot is following the boundary wire to return to the dock.
9. `CHARGING_WITH_TASK_SUSPEND` - the MoeBot is in the dock charging but will return to mow.
10. `ERROR` - the MoeBot is in some error state, perhaps it is outside of the boundary.

The MoeBot integration maps these states per the following table:
| Lawn Mower State | MoeBot States |
|---|---|
| ERROR | EMERGENCY, ERROR, LOCKED |
| PAUSED | PAUSED |
| MOWING | MOWING, FIXED_MOWING, PARK |
| DOCKED | STANDBY, CHARGING, CHARGING_WITH_TASK_SUSPEND |

Additional documentation is provided in the `pymoebot` [repository](https://github.com/Whytey/pymoebot).

## Future

Whilst my main mower is now a Luba 2 5000 and my MoeBot has been all but decommissioned, I am still interested in continuing to develop this integration.

Feel free to continue to log any issues you have, and if possible, I will try and address them.

The following is a list of features I would like to add to the MoeBot:

- Improve the current `ConfigFlow` for adding a MoeBot device; maybe attempt discovery or at least use the abilities of `tinytuya` to identify the Local Key. 
- Provide additional sensors to show Tx/Rx message counts to the mower, including error counters (this would require an accompanying update to the pymoebot library).
- Investigate the benefit of moving to a single coordinator for this integration, per the newer integration development guides.
- Add statistic sensors that show the amount of time spent mowing in 24-hour and 1-week period.

moebot-hass-integration

moebot-hass-integration 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

moebot-hass-integration

moebot-hass-integration 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README