URCL

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 16)

URCL is a "Universal Redstone Computer Language", it's an intermediate language so it isn't designed to be run on CPUs. URCL compiles to a specified ISA using a custom config file.

URCL 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# About URCL
URCL is a "Universal Redstone Computer Language", it's an intermediate language, so it isn't designed to be run on CPUs.
URCL compiles to a specified ISA using a Python config file.

## URCL Documentation
The URCL documentation can be found here: https://docs.google.com/spreadsheets/d/1YAVlzYkib-YHJEu_x28qC4iXJDnM_YTvCKMBYrJXIT0

--------------------

# What this compiler does
You can think of this is a framework to help you easily compile URCL to your ISA without starting from the ground up.
It does the vast majority of the work, and only leaves you to do CPU-specific parts.
Here's a list of things the compiler does for you:
 . Converts all constants and bit patterns to base-10.
 . Replaces all relative addresses with labels.
 . Replaces unsupported complex instructions with supported core instructions.
 . Optional multi-word support.

# How to get a URCL -> your ISA compiler working
There's an ExampleISA.py config file provided, this is roughly what a config file will look like.
There is also a Template.py config file provided, this is a blank config file ready to be filled in.
Here's a list of things you need to do to support URCL:
 . Add translations written in your ISA for the 7 core URCL instructions.
 . Fill in the CPU stats section with your CPU's specs.
If your CPU is more complex, you may also need to:
 . Make a custom function for replacing labels with absolute memory addresses. (For variable length instructions)
 . Make adjustments to the URCL / ISA code at different intervals to better suit your ISA with custom functions.

--------------------

# Usage
To run the file via the command line, you can do:
```
py URCL.py <myISA> <programName.urcl> <ISAoutput.txt> <URCLoutput.urcl>
```
You may also exclude parameters from right to left, so you can have a custom ISA output file without a custom URCL output for example.
You may also run the file without any parameters by simply entering:
```
py URCL.py
```
The special `Core` ISA produces code consisting of only core instructions.
The `Basic` ISA produces code consisting of only basic instructions.
The `Complex` ISA can be used if you just want to transform the program. For example, compiling a program to `Complex` will return source code without commas, changing R1 -> $1, M0 -> #0 etc.
`Complex` is also useful if you'd like a copy of your code targeted at a lower `BITS` value using `@MWFULL`.
Additionally, you can use the special `Emulate` ISA.
The resulting code can be used with the included `URCL_Emulator.py`, which allows you to test the URCL program to find any bugs.
Note that for multi-word programs, they must be compiled to `Core` to work with the emulator.
```
py Emulator/URCL_emulator.py <bits> URCL_output/<URCL_output.urcl>
```
The `<bits>` parameter is optional, as is `<URCL_output.urcl>`.
As with URCL.py, you cannot have `<URCL_output.urcl>` without specifying `<bits>`.

--------------------

# Includes
To allow for programs in multiple files, this compiler supports includes. An include statement specifies a file to include, and the compiler replaces the statement with the full contents of the file. The general usage is below:
```
@INCLUDE SomeFile.ext
```

For instance, if you put a large block of boilerplate subroutines in a separate file `SomeFile.ext`, the above statement will place the code block in the program at compile time without cluttering it up while programming.

NOTE! This include will put the entire file EXACTLY where the statement is. If you put it inside of your running code, it will run at that point in the code! This may or may not be desirable, so keep it in mind!

--------------------

# Defines
To make it easier to keep track of what memory locations and registers do, this compiler supports defines. Defines essentially replace all occurrences of some key with a value, which can be used to keep track of things like memory locations and register names. There is a little nuance to how they can be used, but the basic, simple usage is as follows:
```
@DEFINE SomeMemoryLocation #32

IMM $1 1
LOD $0 SomeMemoryLocation
ADD $0 $0 $1
STR SomeMemoryLocation $0
```

Defines are processed AFTER includes, so you cannot define a filename and then include it. However, you can put defines in an included file, they will be processed like all other defines.

--------------------

# Compiler Directives (Pragmas)
The general structure for a pragma is as follows:
`@PRAGMA <directive> <option1> [<option2>...]`

If one directive is defined twice, the compiler will throw an error. If muktiple conflicting options are defined in one line, the last one is used.

## List of supported pragmas and their options:
```
DuplicateDefines - governs behavior when creating a definition multiple times
    Options:
        [silent, warning, error] - How duplicate defines are communicated to the user
        [ignore, overwrite]      - How duplicate defines are handled
```

--------------------

# Other unofficial addons
You can have a single character string as an immediate. The ascii value will be used:
```
IMM $1 "A"
IMM $2 'B'
IMM $3 "\n"
```
Will become:
```
IMM $1 65
IMM $2 66
IMM $3 10
```
Control characters can be used with this system too, these are:
```
"\n"  / ASCII 10 / new line
"\CR" / ASCII 13 / go to the start of the line
"\LF" / ASCII 10 / same as "/n"
"\BS" / ASCII 8  / backspace
"\SP" / ASCII 32 / space
```

There are some extra instructions specific to this compiler which I have defined, these are not official, but they are used as follows:
```
@PTR {reg}
  {code where reg is used as a pointer}
@UNPTR {reg}
```
This defines a register as a pointer, which means if multiword addressing is enabled and used, this register may be treated in a special way.
Pointers can only be used in: ADD, SUB, INC, DEC, IMM, MOV, LOD, STR, LLOD, LSTR.
```
@MWSP
@MWADDR
@MWLABEL
@MWFULL
```
@MWSP states that the stack pointer should be multi-word, if necessary.
@MWADDR states that memory addresses and memory pointers should be multi-word, if necessary.
@MWLABEL states that labels should be multi-word, if necessary.
@MWFULL is **full** multiword. This means an 8-bit CPU could run a program like this:
```
BITS == 16
IMM $1 2000
IMM $2 3000
MLT $3 $2 $1
OUT %NUMB $3
```
@MWFULL programs will end up being very long, due to the nature of multiword because for operations like BGE, you must check each word of each operand, which takes many instructions.
As a reference, the sample program above expands to 56 URCL instructions when compiled to `BITS == 8`.

--------------------

URCL

URCL 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

URCL

URCL 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README