Drone-Mesh

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 12)

No description available.

Drone-Mesh Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Installation

**[NOTE: The pre-compiled binary is for ESP32]**
1. **Download release binary.**
2. **Upload them to ESP via ESP flash tools.**  
   <img src="images/eps32-flash.png" alt="Installation Image" width="500"/>
3. **Do the configuration step twise, because rootID for devices wont display correctly at first boot**

# Configuration

1. **Connect a button to pin 2.** This button is for getting ESP32 into config mode.
2. **To get into config mode, press and hold the pair button, then press the reset button.**
3. **Once done, the ESP goes to access point mode. Depending on node or router, the SSID will change.**
4. **Connect to the respective ESP access point, then on your browser go to this URL: [http://192.168.4.1](http://192.168.4.1)**

### Router Configuration

<img src="images/router-config.png" alt="Router Configuration Image" width="500"/> 
Configure the necessary parameters and note the Root ID. In this case, it is `3813146501`.

### Node Configuration

<img src="images/node-config.png" alt="Node Configuration Image" width="500"/>  
Configure the necessary parameters. Ensure that the Mesh ID, Password, and Port are the same as the router. For the Root ID, enter the ID which was previously noted.

5. **Configuration Done**

# Use

1. **Connect the router ESP to your PC using 921600 baud.**
2. **Connect the node to the drone with 921600 baud.**
3. **If you are using multiple vehicles, change the `SYSID_THISMAV` parameter.**

Drone-Mesh

Drone-Mesh Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Drone-Mesh

Drone-Mesh Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README