Zeus

KO | EN

gitlite — search

#javascript #python #ai #golang #android #machine-learning #deep-learning #java #nodejs #windows #awesome #kubernetes #awesome-list #pytorch

(★ 9)

Object detection with Mask-RCNN.

Zeus 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Zeus
Rooftop Object Detection

## Introduction
Presented here is a project involving an implementation of a neural network architecture that has the aim of detecting rooftops in a typical 'object detection' task. But why is it called Zeus? For two main reasons; firstly Zeus is the god of the sky and we are detecting rooftops from aerial drone photographs. Secondly, because Zeus was the first god to inhabit Olympus and birth the future gods. This project was my first ambitious AI-related project and I hope like Zeus it will spawn many others that follow in its footsteps. I'm not going to dwell too long on the background, theory, or exact nature of neural networks. Many articles and resources are available for this and my attempt at rehashing this history would not do it justice. Instead, I will focus on the problems I faced with this project and how I overcame them. I find the most useful resources online (especially while attempting this project) were those that focussed on the implementation rather than getting caught up in theory. I will walk through the project and code in chronological order which also closely follows the order of implementation of each component.

A brief explainer on the origins of this project: originally it was a code test sent by a company, but I felt that I needed to finish it. As I progressed through the project I continued to learn about how exactly to implement a neural network and obtain results from working code. This was very valuable to me, as while I have education in neural network theory, the practical nature of actual implementation I feel is something you can only get from experience. As for the tools I chose, Mask-RCNN is a commonly used and well understood network that performs well in object detection tasks. Therefore, I decided to use Mask-RCNN as it had pre-trained weights available and would have lots of documentation (for specific resources used, see references). Faster R-CNN was also considered, but Mask R-CNN also has the option of outputting masks for each object (i.e. performing object segmentation as well as detection).

## First Steps
The first step in any project is retrieving the data and then processing it into a state that you can actually work with. The data in this case is from the Sensefly Crop Field (RGB) dataset. This is a dataset of 356 high-resolution images of a village and surrounding farmland in Switzerland. These photos are not labelled in any way, so the first task was to annotate the data manually. I used LabelImg for this because it was simple. Once the .exe file is downloaded, all that is required is to point the program at the batch of images and load each one sequentially. Once loaded, you draw a box around each rooftop (NB: rooftops was essentially an arbitrary choice, it could have easily been trees for example, but I found that manually labelling each tree would have been too time-consuming. Also, perhaps the network would have struggled a little more with a tree as they aren't as well-defined and obvious as a rooftop.) and add a label. As we are manually labelling, we must follow some principles for the sake of the network. I labelled every single rooftop in an image, including partial or occluded roofs. I aimed to ensure every visible part of the roof was inside the bounding box, while also optimising for the smallest box possible. Additionally, if I was unsure if something was a 'true' rooftop (e.g. a tarpaulin on the ground) or I was unsure what the object was, I didn't label it. How could I expect a neural net to know if something is a rooftop, if the 100-billion-neuron neural net in my head can't do that? So I left those out. Once the painstaking process of labelling all the images was done, I was left with 160 annotations for 160 images (as any image without a rooftop was not labelled, and thus was removed from the dataset). This not an optimum amount of data, however as we are trying to implement transfer learning and only tuning the network towards rooftop identification, I decided it was ok to proceed.

Google Colab was the obvious choice for this project. Mainly because I don't have access to a GPU and Colab provides free use of a Tesla K80 GPU for up to 12 hours. Amazon's AWS services were also an option here, and perhaps would have been quicker to train, but for a personal project a free GPU will be sufficient. Deep neural networks, and especially one of the size of Mask-RCNN, take a while to train without a GPU (for further information, my first round of training without a GPU would have taken over 20 hours and failed halfway through. The GPU performed 20 epochs of training in less than an hour.) There are issues with using Colab that we will discuss. The first of these is that Colab natively runs Tensorflow 2.x, with the option of downgrading to 1.15.2. Mask R-CNN requires 1.15 or less, and using the magic function to downgrade to 1.x within Colab did not work, so I had to pip install Tensorflow 1.14 and then install the necessary CUDA drivers for GPU support. This is not an ideal solution as Google prefers you not to pip install with Colab, but the ad-hoc solution I used seems to work.

The data preprocessing was a time-consuming step but the most important in any data science project. Specific issues I had to fix here included removing any image that didn't have a matching annotation file. I could have done this manually but what is the point in being a programmer if I can't automate things, right? Another issue was automatically seperating the training and testing dataset. The code template I was following had done this by manually selecting a cutoff point given the size of their dataset, but this wasn't clean enough for me. Code has to reusable and adaptable, so I changed this so the code automatically calculates what 80% of the entire dataset is, and cuts off the training set after that point. And as mentioned, the images are very high resolution (4608x3456). This would have likely caused issues with training time further down the line, so I resized them all to 800x600 (this was a bit of guesswork, I just wanted them to be smaller but retain some level of detail.). Resizing the whole dataset also maintained uniformity. However, after I had done this I realised that the annotations would still be for the original resolution, so I also had to resize the annotations. This was done by multiplying the coordinates by the ratio of the new resolution to the old one. Once all this was achieved, the load dataset functions could be run.

## Training
As mentioned, most the work in the training phase actually came down to issues with using the GPU and the dependencies. An initial run of the training with only 5 epochs was taking over 4.5 hours per epoch. This was on the CPU-only mode of Tensorflow, as I had downgraded the Tensorflow version. After ascertaining I indeed was not using the GPU, I reinstalled the CUDA drivers and reran a GPU device check. This showed I was connected to a GPU, and this was confirmed when rerunning the training resulted in one epoch taking around 6 minutes. A definite improvement and a testimony to parallel processing. I ended up running the training for 20 epochs, but I could have extended this for possible improvements in the network's performance. Pre-trained weights were loaded from a model trained on the MS COCO dataset. Bear in mind here we are only training the 'heads' layers which means we are training the deeper output layers for rooftop detection while keeping the earlier layers locked.

## Outcomes
After training the model was evaluated on both the test set (which it hasn't seen) and the training set. Mean absolute precision is a common metric used for object detection tasks. It involves finding the overlap between predicted and actual bounding boxes (or intersection over union), calculating the precision and recall (where precision is the percentage of correctly predicted boxes out of all boxes, and recall is the percentage of correct boxes out of all objects), plotting the resulting precision-recall curve, and then calculating the area under this curve. It lies between 0 and 1 with 1 being a perfect model. The mean absolute precision is just the absolute precision across all images.

Results from my experiments were as follows:

Train mAP: 0.824

Test mAP: 0.547

These results are not good. Ideally we would be aiming for anything above 0.9, and while the training mAP is not far off, the test mAP is quite frankly terrible. Part of this may be due to not training for a sufficient amount of epochs. Additional problems may be present in the size of the data set. Given all of this and the fact that we are not aiming for a production-worthy model, I think the results are acceptable for what we were trying to achieve (namely a working model to learn from).

After evaluation of the model, it's time to have some fun! Images were fed into the network to run predictions on, and I tried a few different functions from various sources including the open-source Matterport Mask-RCNN repo. The predictions were fairly solid for the test images I used (from the test set of course). It seems to detect most rooftops in the image, only occasionally missing the smaller rooftops. The bounding boxes themselves are not as tight to the rooftop as should be expected, especially if the model was to be implemented somewhere like Google Maps for instance, but for the most part they are in the correct place. Interestingly, the model doesn't show many false positives in the test images seen, but one edge case that is present may give an insight into the workings of the model. It detects a shadow on the ground as a rooftop because the shadow (presumably cast by a house) has a very similiar shape to a rooftop in that it's pointed and triangular, and roughly the correct size. This might indicate the model is looking for shape and uniform colour as key indicators of 'rooftopness'. See the example outputs for more information, or try running the notebook yourself.

![alt text](https://github.com/Alexander-Whelan/Zeus/blob/master/example_outputs/example1.png)

One failed experiment within the project was the attempt to obtain a video output of predictions within the model. Mask R-CNN has the ability to predict on video if we seperate the video into frames and predict on each frame then sow the frames back together. However, due to deprecations within Colab (and the function cv2.imshow) I could not get the functions to work correctly. Attempts involved short videos of only 15 seconds, but there may have been some issue with buffer size, or perhaps Colab just doesn't enjoy video, but the notebook continually crashed during these executions and the result was nothing more than a corrupt video file. If anyone has any insight into this please do let me know.

## Future Implications
Overall the project can be labelled a success. The main goals of the project were achieved, which were to learn from direct experience and for all the code to run correctly. Improvements to the data will yield better performance in the metrics. Increasing the sample size is an obvious first step, but currently is outside the scope of this investigation due to the high time demand that comes with hand-labelling data. Another method to increase the size of data seen by the model would be data augmentation. Flipping, rotating, and otherwise manipulating the images would give the model a more diverse array of rooftops in different positions and angles and would be very beneficial to the external validity of the model. Indeed, it would be necessary in order to implement this model anywhere other than the village and surrounding farmland in Switzerland that the images were originally taken from. This is something that should be considered in any computer vision project and would have increased the performance here. Also, training for more epochs or, even more appropriate, printing a proper loss curve to find the ideal number of epochs before overfitting would naturally be the optimal procedure here.

By Alex Whelan

All rights to their respective authors.

## References

https://www.sensefly.com/education/datasets/?dataset=1502

https://arxiv.org/abs/1703.06870

https://machinelearningmastery.com/how-to-train-an-object-detection-model-with-keras/

https://medium.com/practical-deep-learning/a-complete-transfer-learning-toolchain-for-semantic-segmentation-3892d722b604

https://towardsdatascience.com/creating-your-own-object-detector-ad69dda69c85

https://github.com/tzutalin/labelImg

https://github.com/matterport/Mask_RCNN

Zeus

Zeus 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Zeus

Zeus 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README