addr2line

KO | EN

gitlite — search

#react #typescript #golang #machine-learning #deep-learning #linux #macos #java #windows #awesome #cli #awesome-list #security #mcp

(★ 12)

一个提取自linux addr2line命令的库。

addr2line 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# addr2line
一个提取自linux addr2line命令的c语言库。能够将可执行文件16进制字符串型地址解析出对应文件名、函数名和源码行号。

## 一、安装
## 1. 依赖库安装
### (1)bfd、iberty
``` bash
➜  wget https://ftp.gnu.org/gnu/binutils/binutils-2.38.tar.gz
......

➜  tar -zxvf binutils-2.38.tar.gz
......

➜  cd binutils-2.38 && mkdir build && cd build

➜  ../configure
......

➜  sudo make
......

➜  sudo make install
......

➜  sudo cp libiberty/libiberty.a /usr/local/lib/

➜  sudo cd .. && cp include/libiberty.h /usr/local/include/

➜  sudo vim /usr/local/include/bfd.h
```
然后将以下三行注释掉
``` c
// #if !defined PACKAGE && !defined PACKAGE_VERSION
// #error config.h must be included before this header
// #endif
```
### (2)zlib
``` bash
➜  wget http://www.zlib.net/zlib-1.2.11.tar.gz
......

➜  tar -zxvf zlib-1.2.11.tar.gz
......

➜  Documents cd zlib-1.2.11 && mkdir build && cd build

➜  ../configure
......

➜  sudo make
......

➜  sudo make install
......

```

## 2. 编译
``` bash
➜  make

➜  sudo make install

➜  make test # 编译测试代码

➜  ./test #打印如下信息
./test() [0x40301e]
file name is /home/amricy/Documents/common_backtrace/addr2line/test.c
function name is dump
line is 17

./test() [0x40338d]
file name is /home/amricy/Documents/common_backtrace/addr2line/test.c
function name is FuncC
line is 120

./test() [0x403362]
file name is /home/amricy/Documents/common_backtrace/addr2line/test.c
function name is FuncB
line is 113

./test() [0x40331c]
file name is /home/amricy/Documents/common_backtrace/addr2line/test.c
function name is FuncA
line is 106

./test() [0x4032f8]
file name is /home/amricy/Documents/common_backtrace/addr2line/test.c
function name is main
line is 99

/lib64/libc.so.6(__libc_start_main+0xf5) [0x7fb0a86f9555]
Can't find the address.

./test() [0x402f02]
Can't find the address.

FuncC end.
FuncB end.
FuncA end.
```
## 3. 调用此库
头文件引入`#include "addr2line.h"`
编译选项引入库`"-laddr2line -lbfd -liberty -dl -lz"`,且要带有`"-g"`

## 二、例程
一个在屏幕输出调用`dump()`函数的调用栈，以及对应的文件名、函数名和源码行号的程序。
``` c
#include "addr2line.h"

void dump()
{
    int size = 0;
    void *buf[256] = {0};
    char **cbuf = NULL; //存储16进制地址字符串
    char **addresses = NULL;

size = backtrace(buf, sizeof(buf) / (sizeof(void *)));
    if (!size)
    {
        return;
    }

addresses = backtrace_symbols(buf, size);
    if (addresses == NULL)
    {
        return;
    }
    char *file_name = (char *)malloc(sizeof(char) * 30); //确保当执行文件名过长时，不会溢出。
    get_this_file_name(file_name);//获得当前进程名称

if (file_bfd_open(file_name, NULL) == error)
    {
        printf("bfd file open failed.");
        free(addresses);
        free(file_name);
        return error;
    }

unsigned int result = nonsense;
    cbuf = (char **)malloc(size * sizeof(char *));

for (int i = 0; i < size; i++)
    {
        cbuf[i] = (char *)malloc(sizeof(char[8]));
        sprintf(cbuf[i], "%x", (unsigned int)buf[i]); //将地址转化为十六进制字符串类型
        result = translate_address(cbuf[i]);
        printf("%s\n", addresses[i]);
        if (result == error)
        {
            printf("translate address occur error!\n");
        }
        else if (result == no_found)
        {
            printf("Can't find the address.\n");
        }
        else if (result == nonsense)
        {
            printf("The address have found,but everything is null.So it's nonsense.");
        }
        else
        {
            if (result & file_flag)
            {
                printf("file name is %s\n", get_file_name());
            }
            if (result & function_flag)
            {
                printf("function name is %s\n", get_function_name());
            }
            if (result & line_flag)
            {
                printf("line is %u\n", get_line());
            }
            if (result & discriminator_flag)
            {
                printf("discriminator is %u\n", get_discriminator());
            }
            result = ok;
        }
        printf("\n");
    }

for (int i = 0; i < size; i++)
    {
        free(cbuf[i]);
    }
    free(cbuf);
    free(addresses);
    free(file_name);
    file_bfd_close();//记得关闭
    addresses = NULL;
    return;
}

```

## 二、enum变量
``` c
const enum add2line_status{ok,error};

const enum translate_address_result{no_found=0x10,nonsense=0x100,file_flag=0x1000,function_flag=0x10000,line_flag=0x100000,discriminator_flag=0x1000000};

```

## 三、可调用的函数
## 1. file_bfd_open
``` c
int file_bfd_open(const char *file_name, const char *section_name) 
```
**功能**

<input type="checkbox" checked="checked"> 必选

初始化bfd

**传入参数**
| 参数名    | 类型       |必选| 备注    |
| ------------ | ------------ |----------| -------------------------- |
| `file_name `   | `const char *`| <input type="checkbox" checked="checked"> | 需要解析的可执行文件名 |
| `section_name` | `const char * `| <input type="checkbox" > | 需要解析的段名，一般为NULL |

**传出参数**

``` c
int \\ok或者error
```

**例程**
``` c
if(file_bfd_open("bt",NULL)==error)
{
    printf("bfd file open failed.");
    return error;
}
```

## 2. file_bfd_close
``` c
void file_bfd_close() 
```
**功能**

<input type="checkbox" checked="checked"> 必选

用了`file_bfd_open`成功后，则必须使用`file_bfd_close`

## 3. get_this_file_name
``` c
int get_this_file_name(char* file_name);
```
**功能**

<input type="checkbox" > 可选

获取当前进程的名称

**传入参数**
| 参数名    | 类型       |必选| 备注                     |
| ------------ | ------------|--- | -------------------------- |
| `file_name`    | `char * `|<input type="checkbox" checked="checked">| 存储获取当前进程的名称的变量 |

**传出参数**

``` c
int \\file_name的长度
```

**例程**
``` c
char *file_name = (char *)malloc(sizeof(char) * 30);
get_this_file_name(file_name);

...

free(file_name)//记得free
```

## 4. translate_address
``` c
unsigned int translate_address(const char* addr);
```
**功能**

<input type="checkbox" checked="checked"> 必选

将传入的地址，解析出需要的一些信息。

**传入参数**
| 参数名    | 类型       |必选| 备注                     |
| ------------ | ------------|--- | -------------------------- |
| `addr`    | `const char *` |<input type="checkbox" checked="checked">| 需要解析的地址 |

**传出参数**

``` c
unsigned int \\解析结果用7个标志位来表现各种结果
```

**例程**
``` c
unsigned int result=translate_address("0400837");
  
if(result==error)
{
    printf("error!\n");
}
else if(result==no_found)
{
    printf("Can't find.\n");    
}
else if(result==nonsense)
{
    printf("Have found,but everything is null.So it's nonsense.");
}
else
{
    if(result&file_flag)
    {
        printf("file name is %s\n",get_file_name());
    }
    if(result&function_flag)
    {
        printf("function name is %s\n",get_function_name());
    }
    if(result&line_flag)
    {
        printf("line is %u\n",get_line());
    }
    if(result&discriminator_flag)
    {
        printf("discriminator is %u\n",get_discriminator());
    }
    result=ok;
}
```

## 5. get_file_name
``` c
const char* get_file_name();
```
**功能**

<input type="checkbox" > 可选

获得`trasnlate_address`解析的地址对应的源文件名

**传出参数**

| 类型       | 备注                     |
| ------------ | -------------------------- |
| `const char *` | `trasnlate_address`解析的地址对应的源文件名 |

**例程**
``` c
if(result&file_flag)
{
    printf("file name is %s\n",get_file_name());
}
//result为translate_address传出的unsigned int变量
```
## 6. get_function_name
``` c
const char* get_function_name();
```
**功能**

<input type="checkbox" > 可选

`trasnlate_address`解析的地址对应的函数名

**传出参数**

| 类型       | 备注                     |
| ------------ | -------------------------- |
| `const char *` | `trasnlate_address`解析的地址对应的函数名 |

**例程**
``` c
if(result&function_flag)
{
    printf("function name is %s\n",get_function_name());
}
//result为translate_address传出的unsigned int变量
```
## 7. get_line
``` c
unsigned int get_line();
```
**功能**

<input type="checkbox" > 可选

`trasnlate_address`解析的地址对应的行号

**传出参数**

| 类型       | 备注                     |
| ------------ | -------------------------- |
| `unsigned int` | `trasnlate_address`解析的地址对应的行号|

**例程**
``` c
if(result&line_flag)
{
    printf("line is %u\n",get_line());
}
//result为translate_address传出的unsigned int变量
```

## 8. get_discriminator
``` c
unsigned int get_discriminator();
```
**功能**

<input type="checkbox" > 可选

addr2line命令里含有的，暂不明白作用

**传出参数**

| 类型       | 备注                     |
| ------------ | -------------------------- |
| `unsigned int` | `trasnlate_address`解析的地址对应的discriminator|

**例程**
``` c
if(result&discriminator_flag)
{
    printf("discriminator is %u\n",get_discriminator());
}
//result为translate_address传出的unsigned int变量
```

addr2line

addr2line 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

addr2line

addr2line 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README