Timer

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 31)

Small library for measuring elapsed time between start and stop command

Timer 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Arduino Timer Library v1.1.2

The **Arduino Timer Library** allows you to measure the time between started and stop command. The time can measured in milli or micro seconds. Micro seconds have only a resolution of 4µs!

## Installation
Install directly from the library manager of the Arduino or PlatformIO IDE or do it manually:

1. Download from the Release site
2. Unzip
3. Move the folder to your Arduino Library folder

## How to use

First, include the Timer library to your project:

```
#include "Timer.h"
```

Now, you can create a new object(s):

```
Timer timer;
// for micro second resolution:
Timer timer(MICROS);
timer.start(); // start the timer
timer.pause(); // pause the timer
timer.resume(); // resume the timer
timer.stop(); // stops the timer
timer.read(); // gives back the elapsed time in milli or micro seconds
```

## Example

Complete example: Here we created one timer, you can run it and get the result in the Serial monitor.

```
#include "Timer.h"

Timer timer;

void setup() {
  Serial.begin(9600);
  timer.start();
  if(timer.state() == RUNNING) Serial.println("timer running");
  delay(1000);
  timer.stop();
  if(timer.state() == STOPPED) Serial.println("timer stopped");
  Serial.print("time elapsed ms: ");
  Serial.println(timer.read());
  }

void loop() {
  return;
  }

```

## Documentation

### Constructors / Destructor

**Timer(resolution_t resolution = MILLIS)** 
Creates a Timer object
- parameter resolution sets the internal resolution of the Timer, it can MICROS, or MILLIS

**~Ticker()** 
Destructor for Ticker object
	
### Functions

**void start()** 
Start the Timer. If it is paused, it will restarted the Timer.

**void pause()** 
Pause the Timer.

**void resume()** 
Resume the Timer after a pause.

**void stop()** 
Stops the Timer.

**uint32_t read()** 
Returns the time after start, you can read the elapsed time also while running.

**status_t state()** 
Get the Timer state (RUNNING, PAUSED, STOPPED).

Timer

Timer 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Timer

Timer 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README