Genmitsu-PROVerXL-4030-Enclosure

KO | EN

gitlite — search

#python #react #typescript #golang #go #rust #deep-learning #docker #macos #java #windows #awesome #security #open-source

Genmitsu-PROVerXL-4030-Enclosure

(★ 24)

Parts lists and CAD files for a DIY aluminum extrusion enclosure with a slide-out drawer and a table for the 4030 CNC router.

Genmitsu-PROVerXL-4030-Enclosure 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Genmitsu PROVerXL 4030 Enclosure
Parts lists and CAD files for a DIY aluminum extrusion enclosure with a slide-out drawer for the 4030 CNC router.

## Parts lists:

<ul>
  <li><a href="Parts lists/Enclosure.csv">Enclosure parts list</a></li>
  <li><a href="Parts list/Table.csv">Table parts list</a></li>
</ul>

## Fusion360 project files
All designs and drawings made with version 2.0.9052.

<ul>
  <li><a href="Fusion360 project files/Enclosure.f3d">Enclosure</a></li>
  <li><a href="Fusion360 project files/Table.f3d">Table</a></li>
</ul>

## Important assembly notes

1. The flanged button head screws sourced for attaching the drawer slides to the aluminum extrusion rails don't quite fit through the holes/slots in some of the drawer slide tracks. Use a 1/2" drill bit to widen these slots just enough for the screw heads to fit through.

1. Be sure to add a diagonal 2x4 beam under the table surface, as shown in the 2x4Basic's (legs) assembly manual. Double check the length needed, but I _think_ it was 50".

1. Be very careful when attaching the inner drawer slide tracks to the sliding MDF base! Pre-drill the holes using the tracks as a template. Make sure the tracks are aligned correctly so they match the slides on the frame. Drill and screw them as close as possible to the center of the board to minimize risk of delaminating the board later. Use either MDF or particle board - layered plywood may separate.

1. Use a 2-3/8" hole saw to drill a hole for the furniture grommet on the table surface near the back of the enclosure. Make absolutely sure that you're not drilling into the diagonal 2x4 crossbeam!

## Things to improve later

1. The bottom of the enclosure is left open, which can increase the noise level you hear outside the enclosure. Try putting some foam under the sliding base to block some of this.

1. Dust collection could be added by installing a vacuum on the bottom shelf and routing a hose up into the enclosure through the table surface.

1. The front door seal is a bit thick and requires significant pressure to compress enough for good sound reduction. Might be worth trying out different approaches for sealing.

1. I have not yet figured out a good way to add latches for closing and sealing the front door. For now I'm just using wood clamps.

## Renders

## Photos

## Drawings

### Outer dimensions

### Aluminum extrusion dimensions

### Sliding base dimensions

### Table

Genmitsu-PROVerXL-4030-Enclosure

Genmitsu-PROVerXL-4030-Enclosure 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Genmitsu-PROVerXL-4030-Enclosure

Genmitsu-PROVerXL-4030-Enclosure 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README