virb

KO | EN

gitlite — search

#typescript #ai-agents #ai #dsh-plugin #deepseek-harness #open-source #cli #claude-code #codex #developer-tools #react #windows

★ 57 Open GitHub ↗

Interactive Vim mode for IRB, Rails console, and PRY

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Virb

Virb is an interactive Vim mode for IRB, Rails console, and Pry.

![screen1](https://raw.github.com/danchoi/virb/master/images/virb1-sm.png)
![screen2](https://raw.github.com/danchoi/virb/master/images/virb2-sm.png)

## Motivation

IRB is Ruby's interactive REPL. IRB is a very handy tool, but its text-editing
capabilities are limited. Virb wraps an IRB session in a Vim session and gives
you convenient ways to evaluate Ruby code from Vim.

Virb inverts the approach taken by
the [interactive_editor](https://github.com/jberkel/interactive_editor) gem and
similar solutions which let you pop out into Vim from IRB and come back to IRB
to see the results.  Virb keeps you in Vim at all times, calling IRB behind the
scenes and fetching IRB's output to display inside Vim.

## Install

gem install virb

Virb requires Ruby 1.9 and Vim 7.2 or above. Virb has been tested only on OS X
10.8 and Ubuntu Linux.

## Using Virb

Start up Virb with the command

virb [file]

The optional `file` is a text file that contains Ruby code that you
would like to run interactively.

Virb opens 2 Vim buffers. The bottom buffer is the interactive buffer, 
where you can edit Ruby code and then send it to the underlying interactive
Ruby session for evaluation. The top buffer is the output buffer, where you 
can see the IRB session you are controlling from the interactive buffer.

To evaluate code in the interactive buffer:

To evaluate a line of code, put the cursor on it, and press ENTER in normal mode.

To evaluate several lines of code, you can either

1. select the lines in Vim's visual mode, and press ENTER to evaluate them;
2. use an ed-style range command: `:[range]Virb`

To clear the evaluation output butter, press `CTRL-l`.

If IRB takes too long (more than about half a second) to evaluate your code,
you may need to manually force the session buffer to update itself. You can
force an update by pressing SPACE in normal mode.

After you start up Virb, you can also monitor the IRB session you are driving
by tailing a file called `.virb/session` (relative to the working directory).

## Using Virb with Pry

Make sure you have the `pry` gem installed. Then you can run this:

virb-pry [file]

When virb opens, you should be able to send your code for evaluation to Pry and
get Pry output in the virb session buffer.

## How to wrap Rails console with Virb

If you want to use Virb with the standard Rails console:

Put this in your Gemfile:

group :development do
      gem 'virb'
    end

and start Rails console as you do normally, with `rails c`. You should see the
Virb interface open, where you can interact with the Ralis console through a
Vim buffer and see its output in the other Vim buffer.

If you don't want to make `virb` default dependency in the Gemfile, you can have
Bundler load virb only if an environment variable is present. E.g.,

group :virb do
      gem 'virb'
    end

# and add this to config/application.rb

if ENV['VIRB_ENABLED'] == 'true'
      console do
         Bundler.require :virb
         require 'virb/default'
      end
    end

If you want to open a worksheet in Virb + Rails console, don't specify it on
the command line. Open it from within Vim using `:e [file]` after the Virb
session has started.

If you want to use Virb with Pry and Rails console:

Put this in your Gemfile:

group :development do
      gem 'pry'
      gem 'virb'
    end

and start Rails console like this:

VIRB=pry rails c

## Caveats

The normal command line options for `irb` and `pry` do not work with `virb`.

Also, `irb` extensions and `.irbrc` settings that introduce output coloring may
garble the evaluated output in Virb. For best results, remove these extensions.

## Issues

Please report issues [on the GitHub issue tracker](https://github.com/danchoi/virb/issues).

## Tip

You may want try adding a Vim plugin called
[ri.vim](https://github.com/danchoi/ri.vim) to perform
Ruby documentation lookups from the Vim workspace. Virb and ri.vim are
compatible, and written by the same author.

## Author

Virb was written by [Daniel Choi](http://danielchoi.com/software), an independent software developer based in Cambridge, Massachusetts.

* [GitHub](http://github.com/danchoi)
* [Twitter](http://twitter.com/danchoi)
* I am available for short to medium-term consulting projects: [Email](mailto:dhchoi@gmail.com)

virb

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README