finik-v003

KO | EN

gitlite — search

#react #typescript #android #rust #deep-learning #docker #macos #cli #kubernetes #vue #awesome-list #security #openai #mcp

(★ 16)

A user-friendly SDK for the CH32V003 microcontroller with an Arduino-like project setup, designed for quick and easy development.

finik-v003 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# FINIK CH32V003 SDK

Welcome to the `finik-v003` SDK repository! This SDK provides a seamless and efficient development environment for the CH32V003 microcontroller, combining the simplicity of an Arduino-style project structure with the flexibility of CMake.

## Overview

The CH32V003 microcontroller is a cost-effective solution for various embedded systems projects. This SDK ensures that both novice and experienced developers can quickly get started without requiring extensive setup or deep technical knowledge.

![Specifications](https://raw.githubusercontent.com/karasevia/finik-v003/main/docs/specifications.png)

### Key Features

- **Ease of Use**: Simple and intuitive setup process, similar to the Arduino IDE.
- **CMake Integration**: Streamlined project structure managed by CMake, allowing for advanced project configurations.
- **Comprehensive Tooling**: Essential VS Code extensions provided to enhance the development workflow.

## Getting Started (Windows)

To start using the SDK, follow these steps:

1. **Download the toolchain**:
   Download the toolchain from [Yandex Disk](https://disk.yandex.ru/d/RmjCNxb3dcRByQ) or [Google Drive](https://drive.google.com/file/d/1hytLr7pkEfrvUR4fV7C-jODg7oK6aswY/view?usp=sharing), and place it in the project folder.

2. **Install prerequisites**:
   Install the following:
   - [CMake](https://cmake.org/download/)
   - [Git](https://git-scm.com/downloads/win)
   - [Python](https://www.python.org/downloads/windows/)

Install the Python library (This is needed to send commands to the MCU):
   ```sh
   pip install pyserial
   ```
  
3. **Install VS Code and extensions**:
   Install [VS Code](https://code.visualstudio.com/). Then, in your terminal, run:
   ```sh
   code --install-extension ms-vscode.cpptools
   code --install-extension ms-vscode.cmake-tools
   code --install-extension twxs.cmake
   code --install-extension marus25.cortex-debug
   code --install-extension dan-c-underwood.arm
   code --install-extension zixuanwang.linkerscript
   code --install-extension badlogicgames.serial-plotter
   code --install-extension sanaajani.taskrunnercode
   code --install-extension ms-vscode.cpptools-extension-pack
   code --install-extension awsxxf.serialterminal
   ```
   Reload VS Code after installation.

4. **Install drivers for USB-UART**:
   You can find common drivers in the toolchain folder.

5. **Clone the repository**:
   Right-click and choose "Open Git Bash Here" in your desired directory, then run:
   ```sh
   git clone https://github.com/karasevia/finik-v003.git
   ```

6. **Set your serial port**:
   Update the `COM18` value in [tasks.json](.vscode/tasks.json) to match your serial port.

7. **Start developing**:
   You are now ready to begin development!

## Development Steps

![Board View](https://raw.githubusercontent.com/karasevia/finik-v003/main/docs/board_view.PNG)

- Modify the delay time in the loop: [delay](src/main.c#L30)
- Open the Task Runner and run `[flash] update from program`.
- Observe the results on your board.

## Debug with OpenOCD

1. Change the [CMAKE_BUILD_TYPE](cmake/toolchain-ch32v00x.cmake#L47) to `Debug`.
2. Open "Run and Debug" (Ctrl + Shift + D).
3. Start debugging.

## Configurations

The last two memory pages are reserved for saving configuration data during reloading and flashing. This allows you to store up to 62 bytes. To use this, create an object using the following structure:

```c
union config_u {
    config_t raw;
    struct {
        uint8_t mode;
        uint8_t mac[6];
        uint8_t ipv4[4];
        char password[32];
    };
} config;
```

To read and write the settings, use the following methods (data is only written if it has changed):

```c
read_config(&config.raw);
save_config(&config.raw);
```

You can access the configuration like this:

```c
config.mode = 3;
if (config.ipv4[0] == 192 &&
    config.ipv4[1] == 168 &&
    config.ipv4[2] == 0 &&
    config.ipv4[3] == 31) {
    compare(password, config.password);
}
```

## Useful Information

![MCU View](https://raw.githubusercontent.com/karasevia/finik-v003/main/docs/ch32v003f4p6.svg)

- [Data Sheet](docs/CH32V003DS0.PDF)
- [Reference Manual](docs/CH32V003RM.PDF)

### Acknowledgements

This project is based on and improves upon several existing projects:
- [ch32v307-cmake-vsc-noos-template](https://github.com/sadkotheguest/ch32v307-cmake-vsc-noos-template)
- [arduino-wch32v003](https://github.com/AlexanderMandera/arduino-wch32v003)
- [ch32v003-uart-programmer](https://github.com/74th/ch32v003-uart-programmer)

finik-v003

finik-v003 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

finik-v003

finik-v003 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README