LYWSD02MMC

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 11)

How to collect Temp and Humidity from XIAOMI clock with out MI HOME account - RASPBERRY PY

LYWSD02MMC 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# How to collect Temp and Humidity from XIAOMI clock with out MI HOME account - RASPBERRY PI
# LYWSD02MMC

![LYWSD02MMC](https://user-images.githubusercontent.com/32024959/150021795-dc90d4a5-64a9-40ae-bc4f-82fbd330171d.jpg)

# LYWSDCGQ/01ZM
![LYWSDCGQ-01ZM](https://user-images.githubusercontent.com/32024959/150075836-ea2589b2-6772-448d-9198-034720fc4acf.jpg)

# LYWSD03MMC

![LYWSD03MMC](https://user-images.githubusercontent.com/32024959/150021528-b9583cac-ff0a-4df0-8ffa-3ae525ca1bfe.jpg)

# GATTTOOL command
As a conclusion the gatttool command to be used is :
>gatttool --device="MAC Addr" --char-write-req -a 0x004c -n 0100  --listen  
Characteristic value was written successfully  
Notification handle = 0x004b value: c3 0a 36  
Notification handle = 0x004b value: c6 0a 36

For the model: LYWSD03MMC
>gatttool --device="MAC Addr" --char-write-req -a 0x0038 -n 0100  --listen  
  
# Value conversions
>The temperature is c3 0a (little endian) => 0x0aC3(hexa) is 2755 (decimal) => 27°55 Celcius  
>The Humidity is 36 => 0x36(hexa) is 54(decimal) => 54% humidity.

#Some informations about the approach to track and identification of the attributes: 
1- BLE Characteristic identification
To look for Temperature & Humidity characteristic - Using BLE Scanner.  
With the "Characteristic" can be identified. In the case of LYWSD02MMC the UUID is ebe0ccc1-7a0a-4b0c-8a1a-6ff2997da3a6.
2- BLE communication tracking
On one terminal run the "hcidump -X" to dump the BLE communication.
3- Turn on the notification 
On a second terminal run "bluetoothctl"  
Run "scan on" to detect and identify the MAC of the devices  
Run "connect <MAC Addr>" to connect to the device. 
A list of characteristic will be displayed. Identify the attribute wit the appropriate UUID (ebe0ccc1-7a0a-4b0c-8a1a-6ff2997da3a6) 
Run "select-attribute /org/bluez/hci0/dev_E7_2E_00_80_99_07/service003c/char004a" 
  
Turn the notification on "notify on"

Check on the "hcidump" terminal - to identify the handle.  
  
> ACL data: handle 64 flags 0x00 dlen 9  
  ATT: Write req (0x12)  
     handle 0x004c value  0x01 0x00  
 ACL data: handle 64 flags 0x02 dlen 5  
   ATT: Write resp (0x13)  
 HCI Event: Number of Completed Packets (0x13) plen 5  
    handle 64 packets 1

In our case we did see that the handle "0x004c" is used.

LYWSD02MMC

LYWSD02MMC 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

LYWSD02MMC

LYWSD02MMC 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README