inventree-brother-plugin

KO | EN

gitlite — search

#hacktoberfest #ai #llm #golang #go #android #rust #deep-learning #java #windows #awesome #pytorch #mcp #ios

inventree-brother-plugin

(★ 42)

Label printing plugin for Brother series printers

inventree-brother-plugin 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

[![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT)
![PEP](https://github.com/inventree/inventree-python/actions/workflows/pep.yaml/badge.svg)

# inventree-brother-plugin

A label printing plugin for [InvenTree](https://inventree.org), which provides support for the [Brother label printers](https://www.brother.com.au/en/products/all-labellers/labellers).

This plugin supports printing to *some* Brother label printers with network (wired or WiFi) support. Refer to the [brother_ql docs](https://github.com/pklaus/brother_ql/blob/master/brother_ql/models.py) for a list of label printers which are directly supported.

## Installation

### Minimum Requirements

> [!IMPORTANT]
> This plugin now requires the "modern" InvenTree UI - version `0.18.0` or newer. The plugin will not function correctly on an InvenTree instance below version `0.18.0`

### Installation Procedure

Install this plugin manually as follows:

```
pip install inventree-brother-plugin
```

Or, add to your `plugins.txt` file to install automatically using the `invoke install` command:

```
inventree-brother-plugin
```

Now open your InvenTree's "Admin Center > Plugins" page to activate the plugin. Next, read below for instructions on setting up a printer via "Admin Center > Machines".

## Setup a machine instance for a Brother Label Printer

This plugin provides a driver for the machine registry in InvenTree, where multiple instances of this driver can
be set up for each physical label printer you want to connect to. Each machine has its own individual configuration set.

To set up a new machine, go to "Admin Center > Machines" and hit the "+" button. Now choose a name for this specific printer, select "Label Printer" as machine type and "Brother Label Printer Driver" as a driver, then submit. The new printer will now be listed in the machines table. To configure the printer, click on its line to open the "Machine detail" panel where you can set the "Driver Settings" to match your label printer.

## Configuration Options
The following list gives an overview of the available settings. Also check out the `brother-ql` package for more information.

* **Printer Model**
Currently supported models are: 
QL-500, QL-550, QL-560, QL-570, QL-580N, QL-600, QL-650TD, QL-700, QL-710W, QL-720NW, QL-800, QL-810W, QL-820NWB, QL-1050, QL-1060N, QL-1100, QL-1100NWB, QL-1115NWB, PT-P750W, PT-P900W, PT-P950NW

* **Label Media**
Size and type of the label media. Supported options are (not all labels are available on all printers): 
12, 18, 29, 38, 50, 54, 62, 62red, 102, 103, 104, 17x54, 17x87, 23x23, 29x42, 29x90, 39x90, 39x48, 52x29, 54x29, 60x86, 62x29, 62x100, 102x51, 102x152, 103x164, d12, d24, d58, pt12, pt18, pt24, pt36

* **IP Address**
If connected via TCP/IP, specify the IP address here.

* **USB Device**
If connected via USB, specify the device identifier here (VENDOR_ID:PRODUCT_ID/SERIAL_NUMBER, e.g. from `lsusb`).

* **Auto Cut**
Cut label after printing.

* **Rotation**
Rotation angle, either 0, 90, 180 or 270 degrees.

* **Compression**
Set image compression (required for some printers).

* **High Quality**
Print in high quality (required for some printers).

* **Dithering**
Enables grayscale-dithering for nicer logos and watermarks  
(Default = disabled, to avoid surprising users relying on existing behavior)

inventree-brother-plugin

inventree-brother-plugin 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

inventree-brother-plugin

inventree-brother-plugin 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README