wifi_laboratory

KO | EN

gitlite — search

#hacktoberfest #typescript #llm #go #android #machine-learning #docker #nodejs #cli #kubernetes #awesome-list #pytorch #security #open-source

wifi_laboratory

(★ 89)

PMK and PMKID database

wifi_laboratory 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

hcxlabtool
============

A tool to test updates on hcxdumptool.

Expect compiler warnings and ERRORs.

Expect missing or incomplete functions.

Hardware modification (GPIO push button and GPIO LED) is mandatory when running on a Raspberry Pi!

hcxlabtool highjacks all(!) interfaces, uses the first suitable interface as "rogue1" and disables the remaining ones!

Do not report issues or feature requests.

Rules
------

Form always follows function.

Everything that can be done off line should be done off line.

I have a clear (non-negotiable) priority when testing/adding new features:
```
1. performance (time response behavior when acting with targets and less destructive attack vector) 
2. computing time (less CPU cycles)
3. power consumption of the entire system
...
10. other features like GPS
...

What Doesn't hcxlabtool Do?
-----------------------------

* It does not crack WPA PSK related hashes. (Use Hashcat or JtR to recover the PSK.)

* It does not crack WEP. (Use the aircrack-ng suite instead.)

* It does not crack WPS. (Use Reaver or Bully instead.)

* It does not decrypt encrypted traffic. (Use tshark or Wireshark in parallel.)

* It does not record all traffic captured on the WLAN device. (Use tshark or Wireshark in parallel.)

* It does not perform Evil Twin attacks.

* It is not a honey pot.

**Unsupported:** Windows OS, macOS, Android, emulators or wrappers!

Work Flow
----------

hcxlabtool -> hcxpcapngtool -> hcxhashtool (additional hcxpsktool/hcxeiutool) -> Hashcat or JtR

Requirements
-------------

* Knowledge of radio technology.
* Knowledge of electromagnetic-wave engineering.
* Detailed knowledge of 802.11 protocol.
* Detailed knowledge of key derivation functions.
* Detailed knowledge of Linux.
* Detailed knowledge of filter procedures. (Berkeley Packet Filter, capture filter, display filter, etc.)
* Operating system: Linux (latest longterm or stable [kernel](https://www.kernel.org), mandatory >= 5.15)
* Recommended distribution: [Arch Linux](https://archlinux.org/) (notebooks and desktop systems), [OpenWRT](https://openwrt.org/) (small systems like Raspberry Pi, WiFi router)
* WLAN device chipset must be able to run in monitor mode. MediaTek chipsets are preferred due to active monitor mode capabilities.
* WLAN device driver *must* support monitor and full frame injection mode.
* gcc >= 13 recommended (deprecated versions are not supported: https://gcc.gnu.org/)
* make
* libpcap and libpcap-dev (If internal BPF compiler has been enabled.)
* Raspberry Pi A, B, A+, B+, Zero (WH). (Recommended: Zero (WH) or A+, because of a very low power consumption), but notebooks and desktops will work as well.
* GPIO hardware mod recommended (push button and LED) on Raspberry Pi
* To allow 5/6/7GHz packet injection, it is mandatory to uncomment a regulatory domain that support this: /etc/conf.d/wireless-regdom

**If you decide to compile latest git head, make sure that your distribution is updated to it's latest version!**

**Important Notice**: If you are running Debian on ARM, it is **mandatory** to add "iomem=relaxed" to cmdline.txt to allow IO memory mapping.

wifi_laboratory

wifi_laboratory 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

wifi_laboratory

wifi_laboratory 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README