KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #ai-agents #developer-tools #codex #claude-code #mcp #rust #deepseek-harness #typescript #ai-agent #cli

Prusawire

★ 92 Open GitHub ↗

An unofficial Prusa MK3 and MK4 to Switchwire total conversion mod, from Positron's April Fools of 2025.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Prusawire 2026.R1

A Prusa MK3/MK4 to Voron Switchwire Conversion. Originally from Positron 3D's 2025 April Fools, transformed into a mature and fun 3D printer!

Build Volume: 250mm (X) by 210mm (Y) by 185mm (Z).

## Current Release

2026.R1 was released on 2026-07-24.

[Article: Prusawire R1 - Designed With Leftovers](https://www.printables.com/article/prusawire-r1-designed-with-leftovers-VNGb2GZ).

View the [changelog](CHANGELOG.md) for a for detailed listing of project evolution.

Be sure to grab the latest STLs and documentation from the GitHub Repository or use the _NEW_ [Prusawire Configurator](https://configurator.positron3d.com) to configure your Prusawire, visualize it, and download the STLs you need for your build!

## Upgrading from Beta 1
- Everything to do with XZ Axis has changed and is not compatible with R1.
- Everything to do with Y Axis has changed and is not compatible with R1.
- Electronics adjacent components (Mainboard, RPi Mount, Wago, Toolhead Board, etc), Door Idler components, Gantry Bumper, LCD Cover, and Front Panel/deck cover can be re-used.

## Manual & Documentation

[Assembly Manual](Manuals/Prusawire_2026.R1_Assembly_Manual.pdf).

[Prusawire Documentation and FAQ Site](https://prusawire.positron3d.com).

The [Official Positron3D CAD Viewer](https://cad.positron3d.com?model=Prusawire_2026.R1) can be very helpful in building Prusawire.

Be sure to post your _Make_ on the [Prusawire Printables page](https://www.printables.com/model/1788294-prusawire-2026r1)!

## Bill of Materials

[Prusawire 2026.R1 Bill of Materials](https://docs.google.com/spreadsheets/d/16whAEq4oKpdtc77cCxrXZkcxw_G3URlF5wZYUE42vhc/)

Prusawire will require ~1060g of primary color filament and ~225g of accent color filament.  Accessory and component choices may affect these estimates slightly.

## Who This Printer is For

- You have an old MK3, MK3S, or MK3S+, and you want to teach an old dog new tricks and are on a budget
- You upgraded from MK4S to a Core ONE, and have a leftover frame. You are okay spending money on building a new printer with that hardware.
- You have a MK4 or MK4S that you want to Klipper-ize and experiment with!

Additionally, the following says this printer is for you:

- You want to take your first steps into RepRap beyond Prusa, and Voron is an exciting route.
- You respect the Frankenstein-y nature of this April Fools joke printer

## Want to Support the Project?

First of all, thank you!

- Support Positron3D to fund future endeavors: 
   - [Donate to Positron3D](https://www.paypal.com/donate/?hosted_button_id=YGPRVTSHN4FQG)
   - [Positron3D Merch](https://nomadsgalaxy-shop.fourthwall.com/)

## Serial Numbers

We are accepting serial number requests on the [Positron 3D Discord](https://discord.gg/positron). Please submit your request to the #prusawire-serial-request channel over there.

*Important Note:* Prusawire is _not_ a Voron Switchwire.  Please do not ask for help in the Voron Discord; instead utilize the #prusawire-discussions and #prusawire-questions channels on the Positron 3D Discord.

## Klipper Configuration Files

The most up–to–date Klipper configuration files for setting up or updating the Prusawire are in our [config repository](https://github.com/Positron3D/prusawire-klipper-config).

## Upgrading the Einsy Rambo to Klipper - Read this

Installing Klipper on the Einsy Rambo board is possible, with extra steps. Follow the guide [published by the awesome folks at MyRigs3D](https://myrigs3d.com/blogs/infos/revive-your-prusa-mk3s-with-klipper-1-5-flash-bootloader)! We recommend Method 2.

**Note:** Some users have reported problems using `avrdude` with the latest Raspberry Pi OS version (bookworm). If you experience error messages from avrdude complaining about gpio ports being busy, please try using the bullseye version of Raspberry Pi OS instead, available as "Raspberry Pi OS (Legacy)" in Raspberry Pi Imager.

## Credits

Thank you to all the awesome people and companies that have made this possible.
- Positron 3D Team
- Nomads Galaxy, initial idea
- Ella Fox, the architect of Prusawire Beta 1
- Prusa Research - Prusa i3
- Voron Design - Switchwire
- Jason @ LDO Motors - Part sponsorship
- Levendigs & KB-3D - Part sponsorship
- Siraya Tech Filaments
- The many early access and beta testers

We hope you enjoy this build as much as we enjoyed making it.

The Prusawire Team:
@Safe // @erikbuild // @TheNexusAvenger

## Extra Credits for Existing Printed Parts

See the collection for the most up to date! To name them:

- Printable M3 T-Nuts for 3030 Extrusion, by Kapplion
- Stealthburner umbilical strain relief, by nagelwerkstatt

## Team

Prusawire is currently maintained by the Positron 3D Team.

- Design Lead: @Safe
- Documentation Lead: @erikbuild
- Software Lead: @TheNexusAvenger

Prusawire

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README