raspimouse_ros2

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

raspimouse_ros2

(★ 31)

ROS 2 pakcages for Raspberry Pi Mouse V3

raspimouse_ros2 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# raspimouse_ros2
ROS 2 navigation pakcages for Raspberry Pi Mouse V3

## OS and ROS 2 set up

First of all, you need to install Ubuntu 18.04 and ROS 2 Dashing Diademata on your Raspberry Pi 3 B and PC.
Please refer the official ROS 2 installation process: https://index.ros.org/doc/ros2/Installation/Crystal/Linux-Install-Binary/

### `colcon` and `rosdep` set up

```
sudo apt install python3-colcon-common-extensions python3-rosdep python3-argcomplete
sudo rosdep init
rosdep update
```

### `ROS_DOMAIN_ID` network configuration

Set the environmental variable `ROS_DOMAIN_ID` to specify your network configuration.
The `ROS_DOMAIN_ID` is a number between `0` and `255`.

```
export ROS_DOMAIN_ID=XXX
```

## Package build for Raspberry Pi 3 B

### Raspberry Pi Mouse driver installation

```
git clone https://github.com/rt-net/RaspberryPiMouse.git
cd RaspberryPiMouse/src/drivers
make
sudo make install
sudo insmod rtmouse.ko
sudo usermod -aG dialout $USER
```

### raspimouse_ros2 build

```
mkdir -p ~/ros/dashing/src
cd ~/ros/dashing/src
git clone https://github.com/youtalk/raspimouse_ros2.git -b ignore-cartographer-navigation2
cd raspimouse_ros2
git submodule update --init
cd ../..
rosdep install --from-paths src --ignore-src -r -y
colcon build --symlink-install
source ~/ros/dashing/install/setup.bash
```

## Package build for PC

### raspimouse_ros2 build

```
mkdir -p ~/ros/dashing/src
cd ~/ros/dashing/src
git clone https://github.com/youtalk/raspimouse_ros2.git
cd raspimouse_ros2
git submodule update --init
cd ../..
rosdep install --from-paths src --ignore-src -r -y
colcon build --symlink-install
source ~/ros/dashing/install/setup.bash
```

## Keyboard teleoperation

Run Raspberry Pi Mouse and RPLiDAR A1M8 drivers.

### Raspberry Pi 3 B

```
ros2 launch raspimouse_bringup robot.launch.py
```

### PC

Enable Raspberry Pi Mouse.

```
ros2 lifecycle set raspimouse_driver configure && \
ros2 lifecycle set raspimouse_driver activate && \
ros2 service call /motor_power std_srvs/SetBool '{data: true}'
```

Run Rviz2.

```
ros2 launch raspimouse_bringup rviz2.launch.py
```

Run `teleop_twist_keyboard`.

```
ros2 run teleop_twist_keyboard teleop_twist_keyboard
```

Note that the default linear speed is too fast.
Please decrease the linear speed to 0.15 [m/s] or lower by pressing `x` key several times.

## Cartographer SLAM

### Raspberry Pi 3 B

Do the same as above.

### PC

First do the same as above.
Then move around a floor while recording the bag file for SLAM data.

```
sudo apt install 'ros-dashing-ros2bag*' 'ros-dashing-rosbag2*'
ros2 bag record -a -o ./raspimouse_slam.bag
```

Run `raspimouse_cartographer` to generate 2D map.

```
ros2 launch raspimouse_cartographer cartographer.launch.py
```

Play the bag file recorded before.

```
ros2 bag play ~/raspimouse_slam.bag
```

[![ROS 2 Cartographer SLAM with RasPi Mouse and RPLiDAR A1M8](https://img.youtube.com/vi/OUnz8rO132Q/0.jpg)](https://www.youtube.com/watch?v=OUnz8rO132Q)

Save map files if the quaility of the map on RViz2 is acceptable.

```
ros2 run nav2_map_server map_saver -f ~/.ros/map
```

Note that a sample bag file and map data are stored following directories.

- Bag file: https://github.com/youtalk/raspimouse_bags/tree/master/raspimouse_slam.bag
- Map data: https://github.com/youtalk/raspimouse_ros2/tree/master/raspimouse_navigation2/map

## Navigation 2

### Raspberry Pi 3 B

Do the same as above.

### PC

Run `raspimouse_navigation2` to launch RViz2 with the navigation configuration.
Note that please wait seconds to complete launching navigation nodes.

```
ros2 launch raspimouse_navigation2 navigation2.launch.py map:=/home/$USER/.ros/map.yaml
```

Press `2D Pose Estimate` button to initialize the robot pose. Then Press `Navigation2 Goal` to give the goal pose.
The robot will start moving along the path to the goal pose.

[![ROS 2 Navigation with RasPi Mouse and RPLiDAR A1M8](https://img.youtube.com/vi/iDeybhXFpAI/0.jpg)](https://www.youtube.com/watch?v=iDeybhXFpAI)

raspimouse_ros2

raspimouse_ros2 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

raspimouse_ros2

raspimouse_ros2 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README