boot2sol

KO | EN

gitlite — search

#javascript #react #typescript #llm #go #machine-learning #rust #deep-learning #docker #nodejs #windows #awesome #vue #open-source

(★ 57)

Solitaire. Written as a bootloader.

boot2sol 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# boot2sol

Solitaire. Written inside the bootloader.

## Overview
As part of Move Inc.'s Startup Hackathon, 2016, our team decided to write
solitaire within the first stage bootloader. The goal is to boot an x86
PC with a traditional BIOS (no UEFI) into an interactive game of solitaire
without an operating system. Introduction video:

[![Introduction Video](http://img.youtube.com/vi/3hT80P14Tz8/0.jpg)](http://www.youtube.com/watch?v=3hT80P14Tz8)

## Team Members
* Brian Masney - [masneyb](https://github.com/masneyb)
* Brian Sizemore - [bpsizemore](https://github.com/bpsizemore)
* Ricky Hussmann - [rhussmann](https://github.com/rhussmann)
* Will Austin - [dreae](https://github.com/dreae)

## Technical Requirements
* Must be written in 16-bit x86 assembly language
* Program code and data must fit on a single sector on disk
  * 512 bytes total
  * Last 2 bytes is the boot sector signature (AA55h)
  * Only **510 bytes** total available for our data and code
* System running in real mode; no memory production available
* Limited tooling available for debugging issues
* Requires detailed knowledge of x86 architecture

## Development Toolchain
* Developed in Linux
  * Brian M. and Will used Fedora natively
  * Brian S. used Fedora under Virtualbox
  * Ricky H. used Ubuntu under VMWare
* NASM used for assembly
* mkdosfs used to create the boot floppy
* QEMU for virtualizing the hardware

## Design
There are thirteen piles in solitaire:
* The draw pile
* The discard pile
* A pile for each completed suit (four piles)
* Seven play piles

We included another pile, the space between the discard pile and the suit piles.
This pile is never added to or drawn from, but its existence simplifies the
implementation. So, boot2sol recognizes a total of 14 piles, zero indexed.

The cards in each pile are represented as a linked list. 14 bytes of data are
reserved for the head of each pile in the list. The representation of each
card uses one byte:

Shown | Unused | Offset to next card
------|--------|--------------------
1 bit | 1 bit  | 6 bits

The cards are stored in memory grouped by family. Inside each family, the cards
are ordered ace through king. This allows using the offset in memory to calculate
the card value and family.
Pseudocode: `offset / 13 = family` and `offset mod 13 = card value (ace-king)`.

The end of the linked list in the next pointer is represented with the value
0x111111 (6 ones).

## How to run the game

* Fedora Linux users should only need to run `sudo dnf install qemu-system-x86 nasm`
  to fetch the necessary dependencies.
* Debian-based systems should only need to run `sudo apt-get install qemu-system-x86 nasm`
  to fetch the necessary dependencies.
* `make run` compiles the program and launches it in a VM on your local machine using QEMU.
* To run it on bare metal, run `make` to compile and `dd if=boot.bin of=/dev/sdX bs=512 count=1`,
  where sdX is the path to a thumb drive that you want to boot from. Beware: This will
  destroy any data you have on your thumb drive.

## Keyboard commands
* The `d` key advances the draw pile.
* The `m` key is used to move one or more cards from one pile to another. It takes three additional keyboard commands:
  * Source pile number (See table below)
  * Source pile card index (from the top of the list). Allowed values: a-z, for the 1st through 26th card. The code won't advance past the end of the end of the pile so you can always use z to select the last card pile in the pile.
  * Destination pile number (See table below)

The source and destination pile number for the move command is represented
by the following table:

a | b |   | d | e | f | g
---|---|---|---|---|---|---
 h | i | j | k | l | m | n

For example: You can press `mnzk` to move the last card on pile n (bottom right) to the end of pile k.

## Screenshot

![boot2sol initial page](https://raw.githubusercontent.com/masneyb/boot2sol/master/images/boot2sol-initial-startup.png "boot2sol initial page")

boot2sol

boot2sol 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

boot2sol

boot2sol 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README