esp32-WOL

KO | EN

gitlite — search

#python #hacktoberfest #golang #go #machine-learning #rust #deep-learning #linux #nodejs #java #kubernetes #awesome-list #vue #pytorch

(★ 10)

ESP32 send Wake On Lan packet to power on your Computer. You can do that with its website or a voice assistant (Google or Alexa)

esp32-WOL 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# esp32 Wake On Lan

## Introduction
In this project I used an esp32 to send Wake on Lan packet to power on my Computer. There is a web server where you can send WoL packet and change target MAC address. And for the laziest people I add [ESP RainMaker](https://github.com/espressif/esp-rainmaker/tree/master) project to send WoL packet from an assistant (like Google Home or Alexa).

## Requirements
#### Hardware
- esp32
- Computer with Windows/Linux/MacOS (to build and setup) and/or Computer with Wake on Lan enabled
- Smartphone IOS/Android
- Cable to connect esp32 to your Computer
#### Software
- ESP-IDF (tested on version v5.3.5)
- Python3, CMake, Ninja... (required by ESP-IDF)
- Git
- [ESP RainMaker app](https://github.com/espressif/esp-rainmaker/tree/master) (available in App Store and Play Store)

## Get Started
### Get esp32-WOL

``` bash
git clone --recursive https://github.com/filipporaciti/esp32-WOL.git
cd esp32-WOL
```
### Setup
- #### Target MAC address (Wake on Lan)
You can configure it from the integrated website (port 80) or from menuconfig; from terminal run `idf.py menuconfig` &rarr; `WoL Configuration` &rarr; `Destination MAC address`

- #### WiFi SSID and password
You'll configure it when you have to connect your esp32 with ESP RainMaker app
### Build
``` bash
idf.py build
```
### Flash and Monitor
``` bash
idf.py flash monitor
```
### Connect esp32 to ESP RainMaker app
If you can't see the QR code in your terminal, you can try to run `idf.py erase-flash` before flash the firmware on esp32.

To connect ESP RainMaker app with your esp32 it's just enought to open ESP RainMaker app, push '+' button on top-right and scan the QR code; here you can configure SSID and password thar esp32 takes to connect to the network.
### Connect ESP RainMaker to Google Home and Alexa
- #### Google Home
Open Google Home app &rarr; Settings &rarr; Works with Google &rarr; Search ESP RainMaker and log in with your account.
- #### Alexa
Open Alexa app &rarr; More &rarr; Things to Try &rarr; Search ESP RainMaker, enable it and log in with your account.

esp32-WOL

esp32-WOL 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

esp32-WOL

esp32-WOL 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README