hass-NetzNOESmartMeter

KO | EN

gitlite — search

#hacktoberfest #ai #golang #machine-learning #rust #deep-learning #linux #macos #windows #awesome #cli #awesome-list #pytorch #open-source

hass-NetzNOESmartMeter

(★ 13)

Home Assistant integration for Netz NÖ Smartmeter energy monitoring

hass-NetzNOESmartMeter 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# NetzNÖ Smartmeter Integration for Home Assistant
![Hassfest](https://github.com/TobiKr/hass-NetzNOESmartMeter/actions/workflows/hassfest.yml/badge.svg)
![Validate](https://github.com/TobiKr/hass-NetzNOESmartMeter/actions/workflows/validate.yml/badge.svg)
![Release](https://github.com/TobiKr/hass-NetzNOESmartMeter/actions/workflows/release.yml/badge.svg)

## About

This repo contains a custom component for [Home Assistant](https://www.home-assistant.io) for exposing a sensor
providing information about a registered [NetzNÖ Smartmeter](https://www.netz-noe.at/smartmeter).

The integration syncs all consumption data in Home Assistant, which allows a hourly view on consumption data in Home Assistant:
![Screenshot of the energy dashboard, showing hourly consumption measured by a NetzNÖ SmartMeter](https://raw.githubusercontent.com/TobiKr/hass-NetzNOESmartMeter/main/docs/netznoe-energyusage.png)

## Acknowledgments

This integration is based on the excellent [Wiener Netze Smartmeter](https://github.com/DarwinsBuddy/WienerNetzeSmartmeter) integration by [DarwinsBuddy](https://github.com/DarwinsBuddy) and contributors. We are grateful for their work which served as the foundation for this Netz NÖ adaptation.

## Installation

### Manual

Copy `<project-dir>/custom_components/netznoe` into `<home-assistant-root>/config/custom_components`

### HACS
1. Add this repository as a custom repository in HACS
2. Search for `NetzNÖ Smartmeter` or `netznoe` in HACS
3. Install
4. Restart Home Assistant
5. Configure the integration

## Configure

You can choose between UI configuration or manual (by adding your credentials to `configuration.yaml` and `secrets.yaml` resp.)
After successful configuration you can add sensors to your favourite dashboard, or even to your energy dashboard to track your total consumption.

### UI
1. Navigate to Settings > Devices & Services > Add Integration
2. Search for "NetzNÖ" and add the integration
3. Enter your NetzNÖ SmartMeter Portal credentials and confirm
4. Adding the SmartMeter can take a couple of minutes as it syncs all existing data

### Manual
See [Example configuration files](example/configuration.yaml)

hass-NetzNOESmartMeter

hass-NetzNOESmartMeter 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

hass-NetzNOESmartMeter

hass-NetzNOESmartMeter 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README