aoscx-ansible-dcn-workflows

KO | EN

gitlite — search

#javascript #python #ai #llm #golang #rust #linux #docker #java #windows #awesome #cli #mcp #open-source

aoscx-ansible-dcn-workflows

(★ 17)

repository to hold Ansible workflows for AOS-CX Data Centers

aoscx-ansible-dcn-workflows 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# aoscx-ansible-dcn-workflows
Welcome to the Aruba Switching Github repository for Data Center Networking (DCN) automation using Ansible workflows.
This repository provides several ready-to-run Ansible playbooks that automate provisioning for AOS-CX switches
in DCN architectures.

## Contents
* [DCN Architectures](https://github.com/aruba/aoscx-ansible-dcn-workflows#dcn-architectures)
* [Project Prerequisites](https://github.com/aruba/aoscx-ansible-dcn-workflows#prerequisites)
* [Workflows](https://github.com/aruba/aoscx-ansible-dcn-workflows#workflows)  
    * [Architecture I - Campus Attached DC ToR](https://github.com/aruba/aoscx-ansible-dcn-workflows#architecture-i---campus-attached-dc-tor)  
    * [Architecture II - Dedicated Data Center Two-Tier](https://github.com/aruba/aoscx-ansible-dcn-workflows#architecture-ii---dedicated-data-center-two-tier)  
    * [Architecture III - Dedicated Data Center Layer 3 Spine/Leaf Topology - EBGP EVPN (multi-AS) VXLAN with VSX](https://github.com/aruba/aoscx-ansible-dcn-workflows#architecture-iii---dedicated-data-center-layer-3-spineleaf-topology---ebgp-evpn-multi-as-vxlan-with-vsx)  
    * [Architecture III - Dedicated Data Center Layer 3 Spine/Leaf Topology - IBGP EVPN VXLAN with VSX](https://github.com/aruba/aoscx-ansible-dcn-workflows#architecture-iii---layer-3-spineleaf-topology---ibgp-evpn-vxlan-with-vsx)  
    * [Configure VSX Standalone Playbook](https://github.com/aruba/aoscx-ansible-dcn-workflows#configure-vsx-standalone-playbook) 
    * [Configure Muti-Chassis LAG Standalone Playbook](https://github.com/aruba/aoscx-ansible-dcn-workflows#configure-multi-chassis-lag-standalone-playbook) 
* [Project Structure](https://github.com/aruba/aoscx-ansible-dcn-workflows#project-structure)
* [How To Contribute](https://github.com/aruba/aoscx-ansible-dcn-workflows#how-to-contribute)

## DCN Architectures
The workflows in this repository provision the switches according to the architectures outlined in the Validated Reference Designs (VRDs). The VRDs have been posted on the Aruba Airheads Community:
* [Architecture I - Campus Attached DC ToR (green box)](https://community.arubanetworks.com/t5/Data-Center-Networking-Solutions/Deploying-a-DC-Collapsed-Core-with-NetEdit/ta-p/555487)  
![Architecture I - Campus Attached DC ToR](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/images/campus_attached.png?raw=true)
* [Architecture II - Dedicated Data Center Two-Tier](https://community.arubanetworks.com/t5/Data-Center-Networking-Solutions/Deploying-a-2-Tier-DC-Network-with-NetEdit/ta-p/556403)  
![Architecture II - Dedicated Data Center Two-Tier](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/images/2tier.PNG?raw=true)
* Architecture III - Layer 3 Spine/Leaf Topology Dedicated Data Center
  * [IBGP EVPN VXLAN VSX Centralized L3 Gateway](https://community.arubanetworks.com/t5/Data-Center-Networking-Solutions/Deploying-IBGP-EVPN-VXLAN-VSX-Centralized-L3-Gateway-with/ta-p/626010)  
  * [EBGP EVPN (multi-AS) VXLAN with VSX Centralized L3 Gateway](https://community.arubanetworks.com/t5/Data-Center-Networking-Solutions/Deploying-EBGP-EVPN-multi-AS-VXLAN-with-VSX-Centralized-L3/ta-p/627317)
  
![Architecture III - Layer 3 Spine/Leaf Topology](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/images/spine_leaf.PNG?raw=true)

## Prerequisites
These workflows can be run on any Unix-based system.

### Installations
* The Ansible control machine must have **Python3.5+** and at least **Ansible 2.9** installed. See [Ansible Documentation](https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html) for more information on Ansible installation.

* This project requires the AOS-CX Ansible Collection to be installed. The easiest way to install the collection is by executing the `ansible-galaxy` command on the `requirements.yml` file:  
`ansible-galaxy install -r requirements.yml`  
For more information on how to use the [`aoscx` Collection](https://galaxy.ansible.com/arubanetworks/aoscx) visit our [Aruba devHub](https://developer.arubanetworks.com/aruba-aoscx/docs/getting-started-with-ansible-and-aos-cx).

* This project requires the Python libraries listed below to be installed. The easiest way to install the required libraries is using the `pip` command on the `requirements.txt` file:  
`pip install -r requirements.txt`

### Inventory Setup
This project contains multiple inventories, each corresponding to a specific workflow. Which inventory files correspond to which workflows is described in the [Workflows](https://github.com/aruba/aoscx-ansible-dcn-workflows#workflows) section of this document.

#### AOS-CX DCN Inventory Plugin
Typically users use YAML or INI formatted files to define their Ansible inventory and in this project we have multiple YAML inventory files that correspond to specific workflows. 
Also in this project you'll find an [Ansible inventory plugin](https://docs.ansible.com/ansible/latest/plugins/inventory.html), an inventory plugin allows you to specify a data source as your source for dynamically generating your inventory 
before executing each playbook. We've created the AOS-CX Data Center inventory plugin [`inventory_plugins/aoscx_dcn_plugin.py`](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_plugins/aoscx_dcn_plugin.py) 
which allows users to input data into an Excel file that Ansible will then use to configure devices.

Each workflow has a specific Excel template that it uses to generate Ansible values, the Excel files found in [files/](https://github.com/aruba/aoscx-ansible-dcn-workflows/tree/master/files) can be modified/renamed to match 
 your environment and specifications. Once your Excel file is defined, you simply need to specify the [aoscx_dcn_plugin](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_plugins/aoscx_dcn_plugin.py), the 
 directory containing the Excel file, and the name of the Excel file you want to use in your Ansible YAML inventory file like so:  
```yaml
plugin: aoscx_dcn_plugin           # Name of the plugin
path_to_inventory: ./files # Directory location of Excel
excel_file: dedicated_two_tier_DCN_Settings.xlsx # Name of the Excel
``` 
 
Using this inventory plugin in an inventory file with a playbook is exactly the same, just provide the YAML file with the `-i` option:  
`ansible-playbook deploy_2tier_dedicated_datacenter.yml -i dynamic_2tier_dedicated_dc_inventory.yml`
  
#### Making The Inventory Your Own
In this project we have the option of using either the YAML inventory file to define your environment through variables **or** use the 
[aoscx_dcn_plugin](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_plugins/aoscx_dcn_plugin.py) in combination with an Excel template. 
Either approach works with the provided playbooks, but you should use one or the other.  
  
Each inventory provided is made to be an example. You are encouraged to change IP addressing and interface values to match your environment. 
Note that these inventories use a logical grouping method of to group VSX Pairs and assumes that each VSX pair of access/leaf switches is in a group. 
The names of these groups can be any alphanumeric name; this is just one approach to coupling VSX pairs. 
You can change the "rack#" nomenclature in the example inventory files to your liking as long as you keep the names consistent throughout the inventory.

#### aoscx_dcn_plugin + Excel Templates
Each workflow has an Excel template to use in [files/](https://github.com/aruba/aoscx-ansible-dcn-workflows/tree/master/files), 
which Excel file corresponds to which workflow is described in the [Workflows](https://github.com/aruba/aoscx-ansible-dcn-workflows#workflows) section of this document. 
Cells in the Excel file that are protected are used by the 
[aoscx_dcn_plugin](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_plugins/aoscx_dcn_plugin.py) to generate/populate variables to be later used in the playbooks, cells that have sample data are for you to 
change/modify to make your own. In the event that it's required to unprotect the sheets in the workbook, use the password **aruba** to unlock the sheets.  
* Cells you **should not** change:  
![Protected Cells](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/images/protected_cells1.PNG?raw=true)
![Protected Cells](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/images/protected_cells2.PNG?raw=true)  
  
* Cells you **should** change:  
![Value Cells](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/images/value_cells1.PNG?raw=true)
![Value Cells](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/images/value_cells2.PNG?raw=true)

In addition to populating variables used in Ansible, this plugin will also dynamically generate IP addressing for Loopback Addresses and Fabric Addresses (where applicable) based on values entered in the Network sheet of the Excel template. 
If you'd like to specify device's interface loopback0 IP address, specify a value for the device's Loopback Interface 0 IP Address cell and enter the value "N/A" for Loopback Addresses in the Network sheet. 
If you'd like to specify the fabric addressing for the Spine Leaf workflows, it's recommended to use the YAML inventory file method instead of the Excel template.

#### YAML Inventory File  
All the variables in the inventory files are necessary for the workflows to run. There are three broad categories of variables:
1. Some variables are static, such as the AOS-CX Ansible connection variables. These variables maintain constant values that should not be changed.
1. Some variables' values necessarily must be changed to match device information for your specific environment.
1. Some variables have default values that can be changed. Changing these is optional.

Before executing a workflow, look through the inventory file used by that workflow, and change any variable values that must be changed, and also any variables you would like to change.

* Examples of static inventory variables that **should not** be changed:
```YAML
ansible_connection: arubanetworks.aoscx.aoscx   # DO NOT CHANGE
ansible_network_os: arubanetworks.aoscx.aoscx   # DO NOT CHANGE
ansible_httpapi_use_ssl: True   # DO NOT CHANGE
config_template: leaf.j2
```

* Examples of inventory variables that **need** to be changed:
```YAML
ansible_host: 10.10.10.56 # IP address of the switch, change to match devices in your environment
server_vlans: [11]    # VLANs to be created on leafs for server traffic
core_mclag_uplink_ports: ['1/1/49', '1/1/50'] # Interfaces that will be a part of the MCLAG connecting access device to core
vsx_keepalive_int: 1/1/31
vsx_isl_ports: ['1/1/32']
```

* Examples of inventory variables that **can** be changed, but have default values that work:
```YAML
spine_L3fabric_ips:
  - 192.168.2.1
  - 192.168.2.3
  - 192.168.2.5
  - 192.168.2.7
loopback0_ip: 192.168.1.1
loopback1_ip: 192.168.100.1  
```

## Workflows
This project currently holds the following workflows to provision devices according to each architecture listed in 
[DCN Architectures](https://github.com/aruba/aoscx-ansible-dcn-workflows#dcn-architectures):

### Architecture I - Campus Attached DC ToR
This workflow provisions a campus attached data center set of top of rack AOS-CX switches in a VSX pair based on the [validated reference design](https://community.arubanetworks.com/t5/Data-Center-Networking-Solutions/Deploying-a-DC-Collapsed-Core-with-NetEdit/ta-p/555487).

#### Workflow Prerequisites
- All prerequisites defined above in [Prerequisites](https://github.com/aruba/aoscx-ansible-dcn-workflows#prerequisites)
- Ensure the provided Ansible inventory file has been modified to suit your environment, according to the instructions in [Inventory Setup](https://github.com/aruba/aoscx-ansible-dcn-workflows#inventory-setup) above:  
  - YAML Inventory File : [inventory_2tier_dedicated_dc.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml)  
  - Excel Template File : [campus_attached_dcToR_DCN_Settings.xlsx](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/campus_attached_dcToR_DCN_Settings.xlsx)
    - Example inventory using aoscx_dcn_plugin : [dynamic_campus_attached_dc_tor_inventory.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/dynamic_campus_attached_dc_tor_inventory.yml)
- L3 Campus Core
- DC Core switches = 2 AOS-CX switches (8xxx series, use latest firmware available)
  - DC Core switches should be in a VSX pair
- Out-of-Band management (OOBM) connection to management port on AOS-CX switches
  - Ansible control machine should be reachable via from each device's OOBM

#### Files Used
* Playbook : [deploy_campus_attached_dc_tor.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/deploy_campus_attached_dc_tor.yml)  
* Inventory : 
  * YAML Inventory File : [inventory_2tier_dedicated_dc.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml)
    * ***Note:** This inventory file is also used for the Architecture II workflow, so it contains additional information for access switches (Zone1-Rack<1/3>-Access<1/2/3/4>). 
    Valid values for variables relating to those devices are not necessary for this workflow.*  
  * Excel Template File : [campus_attached_dcToR_DCN_Settings.xlsx](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/campus_attached_dcToR_DCN_Settings.xlsx)  
* Jinja2 Templates : [templates/2Tier/core.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/2Tier/core.j2)

#### Workflow Walkthrough
* **Prior to executing the Ansible playbook, the environment must be in this initial state:**
  * Zone1-Core<1a/1b> - These devices each have a default configuration with an IP address (DHCP/Static) assigned to the management interface. This IP address should match the value of [`ansible_host`](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L49) for each device in the inventory.
* The playbook will perform the following actions on every `core` device in the [inventory file](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L77), using SSH:
  1. Generate a configuration based on the template file [templates/2Tier/core.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/2Tier/core.j2) and values defined in the inventory
  1. Push the generated configuration to the device using the AOS-CX Ansible **SSH** module `aoscx_config`
  1. Enable 10g speed interface groups (if defined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L76)) 
 using the AOS-CX Ansible **SSH** module `aoscx_config`
  1. Create [VSX Keepalive](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L33) L3 Interface
  1. Create [VSX Inter-switch link](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L34-L35)
  1. Configure [VSX attributes](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L46-L48) on the switch and specify device role as outlined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L51)
  1. Create all VLANs defined as `server_vlans` in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L27)
  1. Create SVIs for all VLANs defined as `core_vlan_interfaces` in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L107-L111)
  1. Configure the multi-chassis LAGs that connect to each access switch and trunk the VLANs in [`trunk_vlans`](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L92).
     * **Note:** `vsx_pair_mclags` is a list of VSX Pair (rack# grouping) information for the core devices to use for configuring downlink interfaces. You should modify these values appropriately to match your environment.
  
  1. Configure BGP neighbor for iBGP peering between the core switches

* For example final configurations for this workflow, see [configs/sample_configs/arch1](https://github.com/aruba/aoscx-ansible-dcn-workflows/configs/sample_configs/arch1)
  
**Because of path requirements, you must run this workflow from the root level of the cloned repository:**  
`ansible-playbook deploy_campus_attached_dc_tor.yml -i inventory_2tier_dedicated_dc.yml`
  
    
### Architecture II - Dedicated Data Center Two-Tier
This workflow provisions a VSX pair of switches acting as a centralized collapsed Data Center core 
 and campus attached access AOS-CX switches in VSX pairs based on the [validated reference design](https://community.arubanetworks.com/t5/Data-Center-Networking-Solutions/Deploying-a-2-Tier-DC-Network-with-NetEdit/ta-p/556403).

#### Workflow Prerequisites
- All prerequisites defined above in [Prerequisites](https://github.com/aruba/aoscx-ansible-dcn-workflows#prerequisites)
- Ensure the provided Ansible inventory file has been modified to suit your environment, according to the instructions in [Inventory Setup](https://github.com/aruba/aoscx-ansible-dcn-workflows#inventory-setup) above:  
  - YAML Inventory File : [inventory_2tier_dedicated_dc.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml)  
  - Excel Template File : [dedicated_two_tier_DCN_Settings.xlsx](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/dedicated_two_tier_DCN_Settings.xlsx)
    - Example inventory using aoscx_dcn_plugin : [dynamic_2tier_dedicated_dc_inventory.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/dynamic_2tier_dedicated_dc_inventory.yml)
- DC Core switches = 2 AOS-CX switches (8xxx series, use latest firmware available)
  - DC Core switches should be in a VSX pair
- Access switches = 4 or more AOS-CX switches (8xxx series, use latest firmware available)
  - Access switches should be in VSX pairs
- Out-of-Band management (OOBM) connection to management port on AOS-CX switches
  - Ansible control machine should be reachable via from each device's OOBM

#### Files Used
* Playbook : [deploy_2tier_dedicated_datacenter.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/deploy_2tier_dedicated_datacenter.yml)  
* Inventory : 
  * YAML Inventory File : [inventory_2tier_dedicated_dc.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml)  
  * Excel Template File : [dedicated_two_tier_DCN_Settings.xlsx](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/dedicated_two_tier_DCN_Settings.xlsx)
    * Example inventory using aoscx_dcn_plugin : [dynamic_2tier_dedicated_dc_inventory.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/dynamic_2tier_dedicated_dc_inventory.yml)  
* Jinja2 Templates :
  * [templates/2Tier/access.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/2Tier/access.j2)  
  * [templates/2Tier/core.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/2Tier/core.j2)

#### Workflow Walkthrough
* **Before the Ansible playbook will be executed, the environment is in this initial state:**
  * Zone1-Core<1a/1b> + Zone1-Rack<1/3>-Access<1/2/3/4> - These devices each have a default configuration with an IP address (DHCP/Static) assigned to the management interface. This IP address should match the value of [`ansible_host`](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L51) for each device in the inventory.  
  * Zone1-Rack1-Access<1/2> - These devices are in a VSX pair with their physical links matching the values defined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L33-L35)
  * Zone1-Rack3-Access<3/4> - These devices are in a VSX pair with their physical links matching the values defined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L33-L35) 
  * Zone1-Core<1a/1b> - These devices are in a VSX pair with their physical links matching the values defined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L33-L35)
* The playbook will perform the following actions on **every** device in the inventory file [inventory_2tier_dedicated_dc.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml) 
using **SSH**:
  1. Generate a configuration based on the template file [templates/2Tier/core.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/2Tier/core.j2) or [templates/2Tier/access.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/2Tier/access.j2) and values defined in the inventory
  1. Push the generated configuration to the device using the AOS-CX Ansible SSH module `aoscx_config`
  1. Enable 10g speed interface groups (if defined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L78)) 
 using the AOS-CX Ansible SSH module `aoscx_config`
* The playbook will perform the following actions on every `core` device in the [inventory file](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml) 
using **SSH**:
  1. Create [VSX Keepalive](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L33) L3 Interface
  1. Create [VSX Inter-switch link](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L34-L35)
  1. Configure [VSX attributes](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L46-L48) on the switch and specify device role as outlined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L53)
  1. Create all VLANs defined as `server_vlans` in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L27)
  1. Create SVIs for all VLANs defined as `core_vlan_interfaces` in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L107-L111)
  1. Configure the multi-chassis LAGs that connect to each access switch and trunk the VLANs in [`trunk_vlans`](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L92).
     * **Note:** `vsx_pair_mclags` is a list of VSX Pair (rack# grouping) information for the core devices to use for configuring downlink interfaces. You should modify these values appropriately to match your environment.
    
  1. Configure BGP neighbor for iBGP peering between the core switches  
  
* The playbook will perform the following actions on every `access` device in the [inventory file](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml) 
using **SSH**:
  1. Create [VSX Keepalive](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L33) L3 Interface
  1. Create [VSX Inter-switch link](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L34-L35)
  1. Configure [VSX attributes](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L46-L48) on the switch and specify device role as outlined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L51)
  1. Create all VLANs defined as `server_vlans` in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_2tier_dedicated_dc.yml#L27)
  1. Configure the multi-chassis LAG that connects to each core switch and trunk the `server_vlans` 
* For example final configurations for this workflow, see [configs/sample_configs/arch2](https://github.com/aruba/aoscx-ansible-dcn-workflows/configs/sample_configs/arch2)
  
**Because of path requirements, you must run this workflow from the root level of the cloned repository:** 
`ansible-playbook deploy_2tier_dedicated_datacenter.yml -i inventory_2tier_dedicated_dc.yml`

### Architecture III - Dedicated Data Center Layer 3 Spine/Leaf Topology - EBGP EVPN (multi-AS) VXLAN with VSX
This workflow provisions switches in a Spine/Leaf topology using eBGP EVPN for the Layer3 fabric and L2 VXLAN with VSX  
based on the [validated reference design](https://community.arubanetworks.com/t5/Data-Center-Networking-Solutions/Deploying-EBGP-EVPN-multi-AS-VXLAN-with-VSX-Centralized-L3/ta-p/627317). 
This workflow **does not** configure the centralized L3 gateway.  
  
  
#### Workflow Prerequisites
- All prerequisites defined above in [Prerequisites](https://github.com/aruba/aoscx-ansible-dcn-workflows#prerequisites)
- Ensure the provided Ansible inventory file has been modified to suit your environment, according to the instructions in [Inventory Setup](https://github.com/aruba/aoscx-ansible-dcn-workflows#inventory-setup) above:  
  - YAML Inventory File : [inventory_spine_leaf.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml)  
  - Excel Template File : [dedicated_spine_leaf_ebgp_DCN_Settings.xlsx](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/dedicated_spine_leaf_ebgp_DCN_Settings.xlsx)
    - Example inventory using aoscx_dcn_plugin : [dynamic_ebgp_spine_leaf_inventory.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/dynamic_ebgp_spine_leaf_inventory.yml)
- Spine switches = 2 AOS-CX switches  
  - spine switches should be in a VSX pair and **must support EVPN** (8325/8400 required)
- Leaf switches = 4 or more AOS-CX switches
  - leaf switches should be in a VSX pair and **must support EVPN/VXLAN** (8325 required)
- Out-of-Band management connection to management port on AOS-CX switches
  - Ansible control machine should be reachable from device OOBM

#### Files Used
* Playbook : [deploy_ebgp_evpn_vxlan.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/deploy_ebgp_evpn_vxlan.yml)  
* Inventory :  
  * YAML Inventory File : [inventory_spine_leaf.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml)  
  * Excel Template File : [dedicated_spine_leaf_ebgp_DCN_Settings.xlsx](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/dedicated_spine_leaf_ebgp_DCN_Settings.xlsx)
    * Example inventory using aoscx_dcn_plugin : [dynamic_ebgp_spine_leaf_inventory.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/dynamic_ebgp_spine_leaf_inventory.yml)  
* Jinja2 Templates :
  * [templates/eBGP/spine.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/eBGP/spine.j2)  
  * [templates/eBGP/leaf.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/eBGP/leaf.j2)

#### Workflow Walkthrough
* **Before the Ansible playbook will be executed, the environment is in this initial state:**
  * Zone1-Spine<1/2> + Zone1-Rack1-Leaf<1a/1b> + Zone1-Rack3-Leaf<3a/3b> - These devices have a default configuration with an IP address (DHCP/Static) assigned to 
the management interface, this IP address should be the value of [`ansible_host`](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml#L59) for each device in the inventory.  
  * Zone1-Rack1-Leaf<1a/1b> - These devices are in a VSX pair with their physical links matching the values defined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml#L32-L34)
  * Zone1-Rack3-Leaf<3a/3b> - These devices are in a VSX pair with their physical links matching the values defined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml#L32-L34) 
* The playbook will perform the following actions on **every** device in the [inventory file](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml) 
using **SSH**:
  1. Generate a configuration based on the template file [templates/eBGP/spine.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/eBGP/spine.j2) or [templates/eBGP/leaf.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/eBGP/leaf.j2)  
 and values defined in the inventory
  1. Push the generated configuration to the device using the AOS-CX SSH Ansible module `aoscx_config`
  1. Enable 10g speed interface groups (if defined in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml#L116) 
 using the AOS-CX SSH Ansible module `aoscx_config`
* The playbook will perform the following actions on every `spine` device in the [inventory file](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml#L117) 
using **SSH**:
  1. Configure BGP neighbors and EVPN address families for [every leaf's loopback IP address](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml#L122-L126) on every leaf's BGP ASN  
* The playbook will perform the following actions on every `leaf` device in the [inventory file](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml#L36) 
using **SSH**:
  1. 
  s and EVPN address families for [every spine's loopback IP address](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml#L27-L29)
  1. Create all VLANs defined as `server_vlans` in the [inventory](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml#L30) 
  1. Create all EVPN instance and map VLANs defined in `server_vlans`
* For example final configurations for this workflow see [configs/sample_configs/arch3_eBGP](https://github.com/aruba/aoscx-ansible-dcn-workflows/configs/sample_configs/arch3_eBGP)
  
**To run this workflow, you must be at the root level of the cloned repository:**  
`ansible-playbook deploy_ebgp_evpn_vxlan.yml -i inventory_spine_leaf.yml`
  
  
### Architecture III - Dedicated Data Center Layer 3 Spine/Leaf Topology - IBGP EVPN VXLAN with VSX
This workflow provisions switches in a Spine/Leaf topology using OSPF EVPN for the Layer3 fabric and L2 VXLAN with VSX  
based on the [validated reference design](https://community.arubanetworks.com/t5/Data-Center-Networking-Solutions/Deploying-IBGP-EVPN-VXLAN-VSX-Centralized-L3-Gateway-with/ta-p/626010).  
  This workflow **does not** configure the centralized L3 gateway.
  
#### Workflow Prerequisites
- All prerequisites defined above in [Prerequisites](https://github.com/aruba/aoscx-ansible-dcn-workflows#prerequisites)
- Ensure the provided Ansible inventory file has been modified to suit your environment, according to the instructions in [Inventory Setup](https://github.com/aruba/aoscx-ansible-dcn-workflows#inventory-setup) above:  
  - YAML Inventory File : [inventory_spine_leaf.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml)  
  - Excel Template File : [dedicated_spine_leaf_ibgp_DCN_Settings.xlsx](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/dedicated_spine_leaf_ibgp_DCN_Settings.xlsx)
    - Example inventory using aoscx_dcn_plugin : [dynamic_ibgp_spine_leaf_inventory.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/dynamic_ibgp_spine_leaf_inventory.yml)
- Spine switches = 2 AOS-CX switches 
  - spine switches should be in a VSX pair and **must support EVPN** (8325/8400 required)
- Leaf switches = 4 or more AOS-CX switches
  - leaf switches should be in VSX pairs and **must support EVPN/VXLAN** (8325 required)
- Out-of-Band management connection to management port on AOS-CX switches
  - Ansible control machine should be reachable from device OOBM

#### Files Used
* Playbook : [deploy_ibgp_evpn_vxlan.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/deploy_ibgp_evpn_vxlan.yml)  
* Inventory :   
  * YAML Inventory File : [inventory_spine_leaf.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/inventory_spine_leaf.yml)  
  * Excel Template File : [dedicated_spine_leaf_ibgp_DCN_Settings.xlsx](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/files/dedicated_spine_leaf_ibgp_DCN_Settings.xlsx)
    * Example inventory using aoscx_dcn_plugin : [dynamic_ibgp_spine_leaf_inventory.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/dynamic_ibgp_spine_leaf_inventory.yml)
* Jinja2 Templates :
  * [templates/iBGP/spine.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/iBGP/spine.j2)  
  * [templates/iBGP/leaf.j2](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/templates/iBGP/leaf.j2)

### Configure VSX Standalone Playbook
This playbook is a standalone workflow that configures VSX and its attributes on a AOS-CX switch.

#### Playbook Prerequisites
- All prerequisites defined above in [Prerequisites](https://github.com/aruba/aoscx-ansible-dcn-workflows#prerequisites)
- This playbook uses playbook variables therefore it's only necessary for the inventory file to include all the [necessary SSH connection variables](https://developer.arubanetworks.com/aruba-aoscx/docs/using-the-aos-cx-ansible-collection#sshcli-modules) for the [aoscx Collection](https://developer.arubanetworks.com/aruba-aoscx/docs/using-the-aos-cx-ansible-collection).
- Out-of-Band management connection to management port on AOS-CX switches
  - Ansible control machine should be reachable from device OOBM

#### Files Used
* Playbook : [configure_vsx.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/configure_vsx.yml)

#### Playbook Walkthrough
  1. Create [VSX Keepalive](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/configure_vsx.yml#L9) L3 Interface
  1. Create [VSX Inter-switch link](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/configure_vsx.yml#L13-L16) for VSX
  1. Configure [VSX attributes](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/configure_vsx.yml#L10-L12) on the switch and specify device role as outlined in the [playbook variable](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/configure_vsx.yml#L8)

### Configure Multi-Chassis LAG Standalone Playbook
This playbook is a standalone workflow that configures a multi-chassis LAG and its interfaces on a AOS-CX switch.

#### Files Used
* Playbook : [configure_mclag.yml](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/configure_mclag.yml)

#### Playbook Walkthrough
  1. Create all VLANs defined as `mclag_vlans` in the [playbook](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/configure_mclag.yml#L9-L11)
  1. Configure the multi-chassis LAG and it's [interfaces](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/configure_mclag.yml#L12-L14) and trunk the `mclag_vlans` 
  
## Project Structure
```bash
├───configs                                 # Directory for generated configurations
│   ├───sample_configs                          # Sample Final Configurations for all workflows
├───files                                   # Place for any additional files that are used in tasks
│   ├───images                              # Images for README.md
├───filter_plugins                          # Ansible default directory for custom filter plugins
├───tasks                                   # Ansible tasks
│   ├───aoscx                                   # URI Tasks for AOS-CX
├───templates                               # Place to hold Jinja templates for config generation
├───CONTRIBUTING.md                         # Document outlining contributing requirements
├───LICENSE                                 # Project license
├───README.md                               # Document outlining project requirements
├───ansible.cfg                             # Ansible configuration file
├───configure_mclag.yml                     # Standalone playbook for MCLAG configuration
├───configure_vsx.yml                       # Standalone playbook for VSX configuration        
├───deploy_2tier_dedicated_datacenter.yml   # Playbook for Architecture II   
├───deploy_campus_attached_dc_tor.yml       # Playbook for Architecture I 
├───deploy_ebgp_evpn_vxlan.yml              # Playbook for Architecture III - eBGP and EVPN with VXLAN
├───deploy_ibgp_evpn_vxlan.yml              # Playbook for Architecture III - OSPF and EVPN with VXLAN
├───inventory_2tier_dedicated_dc.yml        # Inventory file for Architecture I and Architecture II
├───inventory_2tier_dedicated_dc.yml        # Inventory file for Architecture III workflows
├───requirements.txt                        # Python library requirements for project
├───requirements.yml                        # Galaxy collection requirements for project
```  
  
## How To Contribute
Please follow our guidelines outlined in our [CONTRIBUTING.md](https://github.com/aruba/aoscx-ansible-dcn-workflows/blob/master/CONTRIBUTING.md)

aoscx-ansible-dcn-workflows

aoscx-ansible-dcn-workflows 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

aoscx-ansible-dcn-workflows

aoscx-ansible-dcn-workflows 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README