Real-time-Bionic-Arm-Control-via-CNN-on-Sony-Spresense

KO | EN

gitlite — search

#javascript #python #golang #android #rust #deep-learning #linux #macos #awesome #cli #kubernetes #vue #ios #mcp

Real-time-Bionic-Arm-Control-via-CNN-on-Sony-Spresense

(★ 14)

No description available.

Real-time-Bionic-Arm-Control-via-CNN-on-Sony-Spresense 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Real-time Bionic Arm Control Via CNN-based sEMG Recognition

## System Work Flow:
![Alt text](https://raw.githubusercontent.com/MIC-Laboratory/Real-time-Bionic-Arm-Control-via-CNN-on-Sony-Spresense/main/system.jpg)

## About
This project aims to deploy a deep neural network on the Sony Spresense micro-controller for real-time bionic arm control. We used a 2D Convolutional Neural Network (CNN) as our EMG pattern recognition algorithm, which has been fine-tuned and compressed before deploying to Sony Spresense. Our sEMG data collection is based on Myo Armband, and communicated to the Sony Spresense via. an intermediary board, the ESP32 Devkit v1.

## Demo
[![IMAGE ALT TEXT HERE](https://img.youtube.com/vi/r8Wh6ckIqSM/0.jpg)](https://www.youtube.com/watch?v=r8Wh6ckIqSM)

## Full Story
https://www.hackster.io/emgarm/real-time-bionic-arm-control-via-cnn-based-emg-recognition-b013d3

## Module Setup Guide:
    NOTE: Read Setup.md for INSTALLATION GUIDES.
 
    Sources: 
        1. For ESP32 Devkit v1:
            - arduino-esp32: https://github.com/espressif/arduino-esp32
            - sparthan-myo: https://github.com/project-sparthan/sparthan-myo
        
        2. For Sony Spresense (Main + Extension): 
            - spresense-arduino-tensorflow: https://github.com/YoshinoTaro/spresense-arduino-tensorflow

## Run Code in Arduino IDE:
    1. Flash ESP32/ESP32.ino to ESP32 Devkit v1 board by clicking the upload button in Arduino IDE
    2. Flash Spresense/Spresense.ino to Sony Spresense board by clicking the upload button in Arduino IDE
 
## Files Overview:
1. Folder ESP32 contains:
    - `ESP32.ino`:

1. Connects to Myo Armband via. BLE and retrieve sEMG signals from it.
        2. Communicates retrieved sEMG signals to Sony Spresense via. UART Serial.
        3. (Baud Rate: 250000)

2. Folder Spresense contains:
    - `Spresense.ino`:

1. Decode sEMG signals sent from ESP32 Devkit v1 via. UART Serial
        2. Perform sEMG preprocessing and run model inference z
        3. Control Bionic Arm
        4. (Baud Rate: 250000)

- `arm_control.h`:

1. Robotic Arm Control Utility Function
    
    - `model.h`:
        
        1. Finetuned model weights for tensorflow lite model inference
        2. Exported from: https://github.com/MIC-Laboratory/sEMG_Recognition
    
    - `std_and_mean.h`:
        
        1. Mean and Standard Deviation for each Myo channel, calculated from 7 gestues' sEMG in NinaPro DB5
        2. Source: https://github.com/MIC-Laboratory/sEMG_Recognition

## Offline Training and Finetuning:
Please follow this Github repo: https://github.com/MIC-Laboratory/sEMG_Recognition

Real-time-Bionic-Arm-Control-via-CNN-on-Sony-Spresense

Real-time-Bionic-Arm-Control-via-CNN-on-Sony-Spresense 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Real-time-Bionic-Arm-Control-via-CNN-on-Sony-Spresense

Real-time-Bionic-Arm-Control-via-CNN-on-Sony-Spresense 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README