SmartDSC

KO | EN

gitlite — search

#javascript #react #android #machine-learning #deep-learning #docker #macos #nodejs #java #windows #pytorch #mcp #ios #openai

(★ 20)

DSC and SmartThings Integration with NodeJS

SmartDSC 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

SmartDSC
=====================
----
## Update Section

2016-01-03:  Major update.  I finally am updating the README with better / up-to-date install instructions and I'm adding in Homebridge for siri support.

2015-01-14:  Decided to share my "Everyone Away" App which is handy.  If all presence sensors/mobile devices are away, it'll arm your alarm and set your home to away.  Pretty straightforward... very handy.

## End Update Section

## Background

* Original Author: Kent Holloway \<drizit at gmail dot com\> at https://github.com/kholloway/smartthings-dsc-alarm

* Current Author:  Matt Martz \<matt dot martz at gmail dot com\>

This Repo is going to focus on my specific implementation including:

* Node.JS implementation instead of Python (includes a method for arming and disarming the alarm through the smartthings app)
* Smartthings code for DSC (or generic) alarm panels via REST API

## What this project will not go over

This project will not go over:

* Setting up a server (you could use a Raspberry Pi with Ubuntu if you want something cheap)
* Setting up homebridge (though the SmartApp included enables you to do that)

## Install AlarmServer on your server

### Requirements

* Server with NodeJS installed
* Needs to be on the same network as your DSC Envisalink 3

### Environment / Config Variable Explanations

You can use either Environment Variables or the config file to configure your server.  The demo app's preference is to use ENV variables before the config file ones.

* `NODE_ALARM_APP_PORT`: (Optional) The port you want to open up on your server for SmartThings to talk to (defaults to 8086)
* `NODE_ALARM_ACCESS_TOKEN`: This is the Access Token from SmartThings
* `NODE_ALARM_APP_ID`:  This is the App Id from SmartThings
* `NODE_ALARM_PIN`: This is the 4-digit Pin you want to use to Arm/Disarm the alarm on the DSC side (meaning if your alarm was going off this pin would work to turn it off)
* `NODE_ALARM_PROXY_HOST`: This is the LAN IP Address of your DSC Envisalink 3 Card (e.g. 10.0.0.31)
* `NODE_ALARM_PROXY_PORT`: This is the LAN IP Port of your DSC Envisalink 3 Card (probably 4025)
* `NODE_ALARM_ZONE_COUNT`:  This is the number of sensors you have (door/window/motion/smoke/etc)
* `NODE_ALARM_PARTITION_COUNT`:  This is the number of partitions you have
* `NODE_ALARM_PASSWORD`: This is your DSC Envisalink 3 password (proxy uses this to connect to DSC)
* `NODE_ALARM_SERVER_PASSWORD`: This is the password you want the proxy to use (recommend same as Envisalink 3 password) (mimics what the envisalink 3 does, so other things use this to connect to the proxy)
* `NODE_ALARM_STPASS`: This is the password you want your server to use for ST commands.  SmartThings will use this password to send your server instructions like Arm/Disarm

### Initial Steps

Before you get started, you need a SmartThings Developer Account: [https://graph.api.smartthings.com](https://graph.api.smartthings.com)

#### Create the SmartDSC App

1. Create a new SmartApp and copy/paste the code from `smartapp/dscAlarmIntegrationSmartApp.groovy` into it

2. Set your Location

3. Click "App Settings"

4. Go down to "OAuth" and "Enable OAuth in SmartApp", then click "Update" at the bottom of the page

5. Once updated, click `Code` in the upper right to go back to the code view.

6. Click `Publish` (for me)

#### Install the SmartDCS App on your device

1. In the SmartThings App, go to the `Marketplace` (lower right button on iOS)

2. Go to the `SmartApps` tab

3. Scroll down to `My Apps` and add the `SmartDSC App`

4. Tap `Done` in the upper right (you can configure the app later)

5.  In the SmartThings App, go to your SmartApps section.  You should see the SmartDSC App.  You may need to quit / reopen the app.  Once you see it, tap the SmartApp.

7.  With the SmartDSC App open, tap the `Config` button.  Copy the app_id and access_token for later...

#### Optional step (required for Homebridge)

* Add your app_id and access_token to the NAP-demo/homebridge.json file (use with https://github.com/nfarina/homebridge)

### Getting the server running

#### Method 1: Docker

If you don't have Docker already, skip to Method 2.  If you already have a Docker instance on your home network or are comfortable setting it up, you can use the included Dockerfile to build the project and then run it with this command:

```
docker build -t smart-dsc .
docker run -d --name SmartDSC --publish 8086:8086 --publish 4025:4025 --restart always -e "NODE_ALARM_ACCESS_TOKEN=YOUR-ACCESS-TOKEN" -e "NODE_ALARM_APP_ID=YOUR-APP-ID" -e "NODE_ALARM_PASSWORD=YOUR-APP-PASSWORD" -e "NODE_ALARM_PIN=XXXX" -e "NODE_ALARM_PROXY_HOST=xxx.xxx.xxx.xxx" -e "NODE_ALARM_PROXY_PORT=4025" -e "NODE_ALARM_SERVER_PASSWORD=YOUR-ENVISALINK-PASSWORD" -e "NODE_ALARM_STPASS=password" -e "NODE_ALARM_ZONE_COUNT=numberofzones" -e "NODE_ALARM_PARTITION_COUNT=numberofpartitions" smart-dsc
```

#### Method 2: Copying the files

1. Clone this Repo on your server (`git clone https://github.com/oehokie/SmartDSC.git`)

2. `cd SmartDSC/NAP-demo`

3. Edit the config.js file with your configuration values.  Use the App Id and Access Token you found in the `Initial Steps` above.

4. On the command line, first run: `npm install` which will install required dependencies for you.

5. Then run `node app` which will start the server.

### Setting up the SmartDSC Alarm Thing Device

#### Create the SmartDSC Alarm Thing Device

1. Create a new SmartThing Device Type

2. Copy and Paste the code from `devicetypes/DSCAlarmThing.groovy` and publish it for yourself

#### Install the device using the SmartThings app or Developer page

3. On the SmartThings developer website, go to `My Devices`

4. Click `New Device`

5. Name it, provide required info and in the `Type` section at the bottom you should see your `SmartDSC Alarm Thing`

#### Configure the SmartDCS Alarm Thing Device in the SmartThings App

In order for commands to get sent from the SmartThings app to your Server, you need to edit the preferences of the `SmartDSC Alarm Thing Device`

1. On your mobile device go to the `SmartDSC Alarm Thing Device`

2. In the upper right click the "hamburger" (3 vertical dots) and select `Edit Device`

3. For `Server Password`... this is the STPass variable in the config file / Environment variable.  Use that.

4. For `IP Address for Server`... this is your server's IP Address (should be on the same network as your SmartThings hub)

5. For `Port of Server`... this is the server's port that you opened up.  It defaults to 8086.  NOTE: for some reason this likes to edit itself.  If you open the `Edit Device` page and don't modify this value, it will blank itself.  So change it every time (not my fault)

6. Done... give it a test by Arming your system / disarming it.

### Final steps

* Go back and create zone device types and add them to your SmartApp
* Go back to the SmartDSC App and update your values / configure it how you want.

## Setting up device types

Using the Smartthings IDE create 3 new device types using the code from the devicetypes directory.

There are 4 types of devices you can create:

* DSC Panel       - (Shows partition status info)  (personally I don't use this one, DSC Alarm Thing has replaced it)
* DSC ZoneContact - (contact device open/close)
* DSC ZoneMotion  - (motion device active/inactive)
* DSC ZoneSmoke - (smoke detectors?)
* DSC Alarm Thing - (w/Node.JS method allows arming/disarming the alarm + night mode, manual refresh of data)

In the Web IDE for Smartthings create a new device type for each of the above devices and paste in the code for each device from the corresponding groovy files in the repo.

You can name them whatever you like but I recommend using the names above 'DSC Panel', 'DSC ZoneContact', 'DSC ZoneMotion', 'DSC Thing' (I'm not creative - oehokie), since those names directly identify what they do.

For all the device types make sure you save them and then publish them for yourself.

## Create panel device

Create a new device and choose the type of "DSC Panel" that you published earlier. The network id needs to be **partition1**.

## Create individual zones
Create a new "Zone Device" for each Zone you want Smartthings to show you status for.

The network id needs to be the word 'zone' followed by the matching zone number that your DSC system sees it as.

For example: **zone1** or **zone5**

## Enjoy!

SmartDSC

SmartDSC 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

SmartDSC

SmartDSC 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README