programming-bitcoin-script

KO | EN

gitlite — search

#python #react #typescript #machine-learning #deep-learning #docker #macos #windows #awesome #cli #vue #pytorch #security #mcp

programming-bitcoin-script

(★ 78)

Programming Bitcoin Script Transaction (Crypto) Contracts Step-by-Step - Let's start with building your own bitcoin stack machine from zero / scratch and let's run your own bitcoin ops (operations)...

programming-bitcoin-script Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

For more blockchain books, see the [**Best of Crypto Books page »**](https://openblockchains.github.io/crypto-books/)

---

# Programming Bitcoin Script Transaction (Crypto) Contracts Step-by-Step

_Let's start with building your own bitcoin stack machine from zero / scratch and let's run your own bitcoin ops (operations)..._

**BEWARE: Bitcoin is a gigantic ponzi scheme¹.
To the moon!? The new gold standard!? 
Do NOT "invest" trying to get-rich-quick HODLing. 
Why not? The bitcoin code is archaic and out-of-date.
Burn, baby, burn! Proof-of-work / waste is a global
energy environmental disaster
using 300 kWh per bitcoin transaction (!) that's about 179 kilograms of CO₂ emissions².
Programmable money (or the internet of value) 
for all future generations with (bitcoin) script
without loops and jumps (gotos) and all "stateless"!? LOL.**

¹:  ![](https://raw.githubusercontent.com/openblockchains/programming-bitcoin-script/master/i/trolly-ponzi.png)

(Source: [Best of Bitcoin Maximalist - Scammers, Morons, Clowns, Shills & BagHODLers - Inside The New New Crypto Ponzi Economics](https://bitsblocks.github.io/bitcoin-maximalist))

²: Assuming let's say 0.596 kilograms of CO₂ per kWh 
(that's the energy efficiency in Germany) that's 
about 179 kilograms of CO₂ per bitcoin transaction (300 kWh × 0.596 kg). For more insights see the [Bitcoin Energy Consumption Index](https://digiconomist.net/bitcoin-energy-consumption).

## Inside Bitcoin Script

Did you know? Every (yes, every) bitcoin transaction (payment) runs
a contract script (one half coming from the "output" or "lock" transaction and the
other half coming from the "input" or "unlock" transaction).
The programming language is called simply (bitcoin) script.

> Bitcoin uses a scripting system for transactions.
> Forth-like, Script is simple, stack-based, and processed from left to right.
> It is intentionally not Turing-complete, with no loops.
>
> (Source: [Script @ Bitcoin Wiki](https://en.bitcoin.it/wiki/Script))

First impression. Adding 2+2 in Bitcoin Script starting from zero / scratch:

``` ruby
## A simple stack machine
def op_add( stack )
  left  = stack.pop
  right = stack.pop
  stack.push( left + right )
end

def op_2( stack )
  stack.push( 2 )
end

## Let's run!

stack = []
op_2( stack )     #=> stack = [2]
op_2( stack )     #=> stack = [2,2]
op_add( stack )   #=> stack = [4]
```

(Source: [`stackmachine_add.rb`](stackmachine_add.rb))

Yes, that's all the magic! You have built your own stack machine with
two operations / ops, that is, `op_add` and `op_2`.

The `op_2` operation pushes the number `2` onto the stack.
The `op_add` operation pops the top two numbers from the stack
and pushes the result onto the stack.

Aside - What's a Stack? Push 'n' Pop

A stack is a last-in first-out (LIFO) data structure. Use `push`
to add an element to the top of the stack and use `pop`
to remove the top element from the stack.
Example:

``` ruby
stack = []                   #=> []
stack.empty?                 #=> true

stack.push( 1 )              #=> [1]
stack.empty?                 #=> false
stack.push( 2 )              #=> [1, 2]
stack.push( 3 )              #=> [1, 2, 3]
stack.push( "<signature>" )  #=> [1, 2, 3, "<signature>"]
stack.push( "<pubkey>")      #=> [1, 2, 3, "<signature>", "<pubkey>"]

stack.pop                    #=> "<pubkey>"
stack                        #=> [1, 2, 3, "<signature>"]
stack.pop                    #=> "<signature>"
stack                        #=> [1, 2, 3]

stack.push( 4 )              #=> [1, 2, 3, 4]
stack.push( 5 )              #=> [1, 2, 3, 4, 5]

stack.pop                    #=> 5
stack                        #=> [1, 2, 3, 4]
stack.pop                    #=> 4
stack                        #=> [1, 2, 3]
stack.pop                    #=> 3
stack                        #=> [1, 2]
stack.pop                    #=> 2
stack                        #=> [1]
stack.empty?                 #=> false
stack.pop                    #=> 1
stack                        #=> []
stack.empty?                 #=> true
stack.pop                    #=> nil
```

(Source: [`stack.rb`](stack.rb))

Unlock+Lock / Input+Output / ScriptSig+ScriptPubKey

In "real world" bitcoin the script has two parts / halves in two transactions
that get combined.
The "lock" or "output" or "ScriptPubKey" script
that locks the "unspent transaction output (UTXO)",
and the "unlock" or "input" or "ScriptSig" script that unlocks
the bitcoins.

Anyone Can Spend (Unlock) the Outputs (Bitcoins)

The bitcoins are yours if the bitcoins haven't been spent yet -
see blockchain and how it solves the double-spending problem :-) -
AND if the script returns with true, that is, `1` is on top of the stack.

``` ruby
## A simple stack machine
def op_true( stack )
  stack.push( 1 )
end

## Let's run!

stack = []
##  I) ScriptSig (input/unlock) part
op_true( stack )  #=> stack = [1]

## II) ScriptPubKey (output/lock) part
##     <Empty>
```

(Source: [`stackmachine_anyone.rb`](stackmachine_anyone.rb))

Bingo! Yes, that's all the magic!
The `op_true` operation pushes the number `1`, that is, `true` onto the stack.

The "official" bitcoin script notation reads:

```
ScriptSig (input):    OP_TRUE
ScriptPubKey:         (empty)
```

Now let's split the adding `2+2` script into a two part puzzle,
that is, `?+2=4`
or into `ScriptSig` and `ScriptPubKey`.
If you know the answer you can "unlock" the bounty,
that is, the bitcoins are yours!
Here's the challenge:

``` ruby
## A simple stack machine
def op_add( stack )
  left  = stack.pop
  right = stack.pop
  stack.push( left + right )
end

def op_2( stack )
  stack.push( 2 )
end

def op_4( stack )
  stack.push( 4 )
end

def op_equal( stack )
  left  = stack.pop
  right = stack.pop
  stack.push( left == right ? 1 : 0 )
end

## Let's run!

stack = []
##  I) ScriptSig (input/unlock) part
##     FIX!!! - add your "unlock" stack operation / operations here

## II) ScriptPubKey (output/lock) part
op_2( stack )      #=> stack = [?, 2]
op_add( stack )    #=> stack = [4]
op_4( stack )      #=> stack = [4,4]
op_equal( stack )  #=> stack = [1]
```

(Source: [`stackmachine_puzzle.rb`](stackmachine_puzzle.rb))

The "official" bitcoin script notation reads:

```
ScriptSig (input):    ?
ScriptPubKey:         OP_2 OP_ADD OP_4 OP_EQUAL
```

If you check all Bitcoin script operations -
the following ops should no longer be a mystery:

Constants

|Word | Opcode |Hex | Input | Output | Description|
|-----|--------|----|-------|--------|------------|
| OP_0, OP_FALSE |  0  |  0x00 | Nothing. | (empty value) |  An empty array of bytes is pushed onto the stack. (This is not a no-op: an item is added to the stack.) |
| OP_1, OP_TRUE  | 81  | 0x51  | Nothing. | 1 | The number 1 is pushed onto the stack. |
| OP_2-OP_16 | 82-96 |  0x52-0x60  | Nothing. |  2-16 |  The number in the word name (2-16) is pushed onto the stack. |

Bitwise logic

|Word | Opcode |Hex | Input | Output | Description|
|-----|--------|----|-------|--------|------------|
| OP_EQUAL | 135  | 0x87 | x1 x2  | True / false |  Returns 1 if the inputs are exactly equal, 0 otherwise. |

Arithmetic

|Word | Opcode |Hex | Input | Output | Description|
|-----|--------|----|-------|--------|------------|
| OP_ADD |  147  | 0x93  | a b | out  | a is added to b. |
| OP_MUL |  149  | 0x95  | a b | out  | a is multiplied by b. **disabled.** |
| OP_DIV |  150  | 0x96  | a b | out  | a is divided by b. **disabled.** |

Trivia Corner: Did you know? The `OP_MUL` for multiplications (e.g. `2*2`)
has been banned, that is, disabled!  Why?
Because of security concerns, that is, fear of stack overflows.
What about `OP_DIV` for divisions (e.g. `4/2`)?  Don't ask!
Ask who's protecting you from stack underflows?
So what's left for programming - not much really other than checking
signatures and timelocks :-).

## Standard Scripts

You don't have to start from zero / scratch.
Bitcoin has many standard script templates.
The most important include:

| Short Name | Long Name  |
|------------|------------|
| p2pk   | Pay-to-pubkey     |
| p2pkh  | Pay-to-pubkey-hash |
| p2sh   | Pay-to-script-hash  |

Standard Scripts with SegWit (Segregated Witness)

| Short Name | Long Name  |
|------------|------------|
| p2wpkh | Pay-to-witness-pubkey-hash  |
| p2wsh  | Pay-to-witness-script-hash  |

## p2pk - Pay-to-pubkey

Pay-to-pubkey (p2pk) is the simplest standard script
and was used in the early days
including by Satoshi Nakamoto (the pseudonymous Bitcoin founder).

Bitcoin Trivia:

> As initially the sole and subsequently the predominant miner,
> Nakamoto was awarded bitcoin at genesis and for 10 days afterwards.
> Except for test transactions these remain unspent since mid January 2009.
> The public bitcoin transaction log shows that Nakamoto's known addresses contain
> roughly one million bitcoins. At bitcoin's peak in December 2017,
> this was worth over US$19 billion,
> making Nakamoto possibly the 44th richest person in the world at the time.
>
> (Source: [Satoshi Nakamoto @ Wikipedia](https://en.wikipedia.org/wiki/Satoshi_Nakamoto))

The one million bitcoins are yours if the pay-to-pubkey (p2pk) script
returns with true, that is, `1` is on top of the stack.
The only input you need to unlock the the fortune is the signature. Are you Satoshi?
Let's try:

``` ruby
## Bitcoin crypto helper

class Bitcoin
  def self.checksig( sig, pubkey )
    ## "crypto" magic here
    ##  for testing always return false for now; sorry
    false
  end
end

## A simple stack machine

def op_checksig( stack )
  pubkey = stack.pop
  sig    = stack.pop
  if Bitcoin.checksig( sig, pubkey )
    stack.push( 1 )
  else
    stack.push( 0 )
  end
end

## Let's run!

stack = []
##  I) ScriptSig (input/unlock) part
stack.push( "<sig>" )   #=> stack = ["<sig>"]

## II) ScriptPubKey (output/lock) part
stack.push( "<pubkey")  #=> stack = ["<sig>", "<pubkey>" ]
op_checksig( stack )    #=> stack = [0]
```

(Source: [`pay-to-pubkey.rb`](pay-to-pubkey.rb))

Bingo! Yes, that's all the magic!
The `op_checksig` operation pops two elements from
the stack, that is, the public key (pubkey)
and the signature (sig) and
if the elliptic curve crypto validates the signature (from the input/unlock transaction)
using the public key (from the the output/lock transaction)
then the fortune is yours! If not
the number `0`, that is, `false` gets pushed onto the stack
and you're out of luck. Sorry.

The "official" bitcoin script notation reads:

```
ScriptSig (input): <sig>
ScriptPubKey:      <pubKey> OP_CHECKSIG
```

Note: Can you guess where the input / unlock part got its ScriptSig name
and where the output / lock part got its ScriptPubKey name?
Yes, from the pay-to-pubkey script.

Aside - Ivy - Higher-Level Bitcoin Script Language

What's Ivy?

From the project's readme:

> Ivy is a higher-level language that allows you to write (crypto) contracts
> for the Bitcoin protocol. Ivy can compile to opcodes for Bitcoin’s stack machine,
> Bitcoin Script, and can be used to create SegWit-compatible Bitcoin addresses...
>
> You can try out Ivy using the [Ivy Playground for Bitcoin](https://ivy-lang.org/bitcoin),
> which allows you to create test contracts and try spending them,
> all in a sandboxed environment.
>
> (Source: [Ivy Language Documentation](https://docs.ivy-lang.org/bitcoin/))

Let's look at the pay-to-pubkey script in Ivy:

```
contract LockWithPublicKey(publicKey: PublicKey, val: Value) {
  clause spend(sig: Signature) {
    verify checkSig(publicKey, sig)
    unlock val
  }
}
```

And - surprise, surprise - the higher-level script compiles to

```
<pubKey> OP_CHECKSIG
```

Elliptic Curve Cryptography

So what does a "real world" public key (pubkey) look like?
In the early days Satoshi Nakamoto
used the uncompressed SEC (Standards for Efficient Cryptography) format
for the public key that results
in 65 raw bytes.
Bitcoin uses elliptic curve
cryptography and the public key is a point (x,y) on
the curve where the x and y coordinates are each 256-bit (32 byte) numbers.

In the uncompressed format, place the x and y coordinate next to each other,
then prefix with `04` to indicate that it is an uncompressed public key:

```
prefix (1 byte)         : 04
x-coordinate (32 bytes) : fe53c78e36b86aae8082484a4007b706d5678cabb92d178fc95020d4d8dc41ef
y-coordinate (32 bytes) : 44cfbb8dfa7a593c7910a5b6f94d079061a7766cbeed73e24ee4f654f1e51904
    =>
04fe53c78e36b86aae8082484a4007b706d5678cabb92d178fc95020d4d8dc41ef44cfbb8dfa7a593c7910a5b6f94d079061a7766cbeed73e24ee4f654f1e51904
```

And in the compressed form because the elliptic curve is symmetrical
along its x-axis, the trick is that each x-coordinate will
only ever have one of two possible y coordinates:

- If y is even, it corresponds to one of the points.
- If y is odd, it corresponds to the other.

Thus, in the compressed public key format place the x coordinate
along with a prefix (`02` or `03`)
that tells whether the y is even (`02`) or odd (`03`).

```
prefix (1 byte)         : 03
x-coordinate (32 bytes) : df51984d6b8b8b1cc693e239491f77a36c9e9dfe4a486e9972a18e03610a0d22
     =>
03df51984d6b8b8b1cc693e239491f77a36c9e9dfe4a486e9972a18e03610a0d22
````

Let's create a public key from the private key

Note: Let's use the 3rd party [Elliptic Curve Digital Signature Algorithm (ECDSA)
library / gem](https://rubygems.org/gems/ecdsa) by David Grayson.

``` ruby
require 'pp'
require 'ecdsa'           # Use an elliptic curve library

# This private key is just an example. It should be much more secure!
privatekey = 1234

# Elliptic curve multiplication
group = ECDSA::Group::Secp256k1                          # Select the curve used in Bitcoin
point = group.generator.multiply_by_scalar( privatekey ) # Multiply by integer (not hex)
#=> <ECDSA::Point: secp256k1,
#       0xe37648435c60dcd181b3d41d50857ba5b5abebe279429aa76558f6653f1658f2,
#       0x6d2ee9a82d4158f164ae653e9c6fa7f982ed8c94347fc05c2d068ff1d38b304c>

# Uncompressed format (with prefix 04)
#   Convert to 64 hexstring characters (32 bytes) in length
prefix = '04'
pubkey = prefix + "%064x" % point.x + "%064x" % point.y
#=> "04e37648435c60dcd181b3d41d50857ba5b5abebe279429aa76558f6653f1658f26d2ee9a82d4158f164ae653e9c6fa7f982ed8c94347fc05c2d068ff1d38b304c"

# Compressed format (with prefix - 02 = even / 03 = odd)
#   Instead of using both x and y coordinates,
#   just use the x-coordinate and whether y is even/odd
prefix = point.y % 2 == 0 ? '02' : '03'
pubkey = prefix + "%064x" % point.x
#=> "02e37648435c60dcd181b3d41d50857ba5b5abebe279429aa76558f6653f1658f2"
```

(Source: [`pubkey.rb`](pubkey.rb))

## p2pkh - Pay-to-pubkey-hash

...

Aside - What's Hash160?

It's a hash function to hash and shorten public keys. Public keys
if uncompressed shorten from 65 bytes to 20 bytes
(or if compressed from 33 bytes). Example:

```
pubkey          = 02b4632d08485ff1df2db55b9dafd23347d1c47a457072a1e87be26896549a8737
hash160(pubkey) = 93ce48570b55c42c2af816aeaba06cfee1224fae
````

To compute the Hash160 run the public key through the SHA256 and RIPEMD160 hash functions.
Example:

``` ruby
require 'digest'                           # Hash (Digest) Functions

def hash160( pubkey )
  binary    = [pubkey].pack( "H*" )       # Convert to binary first before hashing
  sha256    = Digest::SHA256.digest( binary )
  ripemd160 = Digest::RMD160.digest( sha256 )
              ripemd160.unpack( "H*" )[0]    # Convert back to hex
end

pubkey = "02b4632d08485ff1df2db55b9dafd23347d1c47a457072a1e87be26896549a8737"
hash160( pubkey )  
#=> "93ce48570b55c42c2af816aeaba06cfee1224fae"
```

(Source: [`hash160.rb`](hash160.rb))

Security Trivia I: Why use SHA256 and RIPEMD160?

RIPEMD160 gets used because it results in
a short 160 bit (20 byte) digest BUT is not the strongest hash function on it's own,
thus, SHA256 gets used for more strength. Best of both world.

Security Trivia II: What's RIPEMD160?

RACE¹ Integrity Primitives Evaluation Message Digest 160-bit

¹: Research and development in Advanced Communications technologies in Europe

``` ruby
def ripemd160( message )
  Digest::RMD160.hexdigest( message )
end

ripemd160( "The quick brown fox jumps over the lazy dog" )
#=> "37f332f68db77bd9d7edd4969571ad671cf9dd3b"

ripemd160( "The quick brown fox jumps over the lazy cog" )
#=> "132072df690933835eb8b6ad0b77e7b6f14acad7"

# The hash of a zero-length string is:
ripemd160( "" )
#=> "9c1185a5c5e9fc54612808977ee8f548b2258d31"
```

(Source: [RIPEMD @ Wikipedia](https://en.wikipedia.org/wiki/RIPEMD))

...

The "official" bitcoin script notation reads:

```
ScriptSig (input): <sig> <pubKey>
ScriptPubKey:      OP_DUP OP_HASH160 <pubKeyHash> OP_EQUALVERIFY OP_CHECKSIG
```

And the Ivy higher-level version reads:

```
contract LockWithPublicKeyHash(pubKeyHash: Hash160(PublicKey), val: Value) {
  clause spend(pubKey: PublicKey, sig: Signature) {
    verify hash160(pubKey) == pubKeyHash
    verify checkSig(pubKey, sig)
    unlock val
  }
}
```

that compiles to

```
OP_DUP OP_HASH160 <pubKeyHash> OP_EQUALVERIFY OP_CHECKSIG
```

To be continued ...

## Appendix

Aside - Simplicity - A New Bitcoin Contract Language?

> Simplicity is a blockchain programming language
> designed as an alternative to Bitcoin script.
>
> (Source: [Simplicity README](https://github.com/ElementsProject/simplicity))

> Why Simplicity?
>
> Bitcoin's Script language is generally limited to combinations
> of digital signature checks, timelocks, and hashlocks.
> While impressive protocols (such as the Lightning Network)
> have been built on these primitives,
> Bitcoin's Script language lacks the expressiveness needed
> for more complex contract scripts.
>
> (Source: [Simplicity: High-Assurance Bitcoin Contract Scripting](https://blockstream.com/2018/11/28/en-simplicity-github/) by Russell O'Connor, Andrew Poelstra, Blockstream Research, November 2018)

> Simplicity: A New Language for Blockchains (Whitepaper Abstract)
>
> Simplicity is a typed, combinator-based, functional language without
> loops and recursion, designed to be used for crypto-currencies
> and blockchain applications. It aims to improve upon existing crypto-currency languages,
> such as Bitcoin's Script, Ethereum's Solidity or Michelson's Liquidity,
> while avoiding some
> of the problems they face. Simplicity comes with formal denotational
> semantics defined in Coq, a popular, general purpose software proof assistant.
> Simplicity also includes operational semantics that are defined
> with an abstract machine that we call the Bit Machine.
> The Bit Machine is used as a tool for measuring the computational space and time
> resources needed to evaluate Simplicity programs. Owing to its Turing
> incompleteness, Simplicity is amenable to static analysis that can be used
> to derive upper bounds on the computational resources needed, prior to
> execution. While Turing incomplete, Simplicity can express any finitary
> function, which we believe is enough to build useful contracts for
> blockchain applications.
>
> (Source: [Simplicity Whitepaper (PDF)](https://blockstream.com/simplicity.pdf) by Russell O'Connor, Blockstream, December 2017)

## Resources

Articles

- [Bitcoin Script @ Bitcoin Wiki](https://en.bitcoin.it/wiki/Script)
- [Script - A mini programming language @ Learn Me a Bitcoin](http://learnmeabitcoin.com/glossary/script) by Greg Walker
- [Opcodes @ Bitcoin Developer Reference](https://bitcoin.org/en/developer-reference#opcodes)

Books / Series

- [A developer-oriented series about Bitcoin](https://davidederosa.com/basic-blockchain-programming/) by Davide De Rosa
  - [The Bitcoin Script language (pt. 1)](https://davidederosa.com/basic-blockchain-programming/bitcoin-script-language-part-one/)
  - [The Bitcoin Script language (pt. 2)](https://davidederosa.com/basic-blockchain-programming/bitcoin-script-language-part-two/)
  - [Standard scripts](https://davidederosa.com/basic-blockchain-programming/standard-scripts/)

- [Programming Bitcoin from Scratch](https://github.com/jimmysong/programmingbitcoin) by Jimmy Song
  - [Chapter 6 - Script](https://github.com/jimmysong/programmingbitcoin/blob/master/ch06.asciidoc) - How Script Works • Example Operations • Parsing the Script Fields • Combining the Script Fields • Standard Scripts • p2pk • Problems with p2pk • Solving the Problems with p2pkh • Scripts Can Be Arbitrarily Constructed • Conclusion
  - [Chapter 8 - Pay-to-Script Hash](https://github.com/jimmysong/programmingbitcoin/blob/master/ch08.asciidoc) - Bare Multisig • Coding OP_CHECKMULTISIG • Problems with Bare Multisig • Pay-to-Script-Hash (p2sh) • Coding p2sh • Conclusion
  - [Chapter 13 - Segregated Witness](https://github.com/jimmysong/programmingbitcoin/blob/master/ch13.asciidoc) - Pay-to-Witness-Pubkey-Hash (p2wpkh) • p2wpkh Transactions • p2sh-p2wpkh • Coding p2wpkh and p2sh-p2wpkh • Pay-to-Witness-Script-Hash (p2wsh) • p2sh-p2wsh • Coding p2wsh and p2sh-p2wsh • Other Improvements • Conclusion

Talk Notes

- [Contracts, Contracts, Contracts - Code Your Own (Crypto Blockchain) Contracts w/ Ruby (sruby), Universum & Co](https://github.com/geraldb/talks/blob/master/contracts.md)
  - Genesis - Bitcoin Script
    - Ivy - Higher-Level Bitcoin Script
    - History Corner - Bitcoin - The World's Worst Database for Everything? - Bitcoin Maximalism in Action
  - Turing Complete and the Halting Problem
    - Fees, Fees, Fees - $$$ - There's No Free Lunch

Code

- [Learn Me a Bitcoin - Simple code snippets to help you understand how Bitcoin works](https://github.com/in3rsha/learnmeabitcoin-code) by Greg Walker

## License

![](https://publicdomainworks.github.io/buttons/zero88x31.png)

The Programming Bitcoin Script Step-by-Step book / guide
is dedicated to the public domain.
Use it as you please with no restrictions whatsoever.

programming-bitcoin-script

programming-bitcoin-script Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

programming-bitcoin-script

programming-bitcoin-script Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README