setup-A8

KO | EN

gitlite — search

#python #go #android #machine-learning #deep-learning #linux #nodejs #windows #cli #kubernetes #awesome-list #security #mcp #ios

(★ 12)

setup A8 development environment.

setup-A8 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

meta-bitmainer
=============

OpenEmbedded / Ångström meta layer for bitminer Miner

Setup instructoins
------------------

To build a bitmainer miner firmware, first prepare a build machine as per OpenEmbedded Required software instructions at http://www.openembedded.org/wiki/Getting_started

When machine is prepared proceed to prepare the bitmainer firmware build by running

git clone git@github.com:bitmaintech/setup-A8.git
    cd setup-A8
    MACHINE=beaglebone ./oebb.sh config beaglebone

Rootfs build instructions
----------------------------------

To build the firmware rootfs run

. environment-angstrom-v2013.06
    ./build-ltc.sh L3/L3+(Miner type) 384(Freq) [init](Only for the first time.)

and then wait for quite a bit for the build to complete.

Note: You will need ~11GB free disk space.

The resulting root initramfs will be in

setup-A8/deploy/eglibc/images/beaglebone/Angstrom-bitmainer-eglibc-ipk-v2013.06-beaglebone.rootfs.cpio.gz.u-boot

Kernel build instructions
-----------------------------------

To build the Linux kernel image run

. environment-angstrom-v2013.06
    bitbake virtual/kernel

which results in a kernel image at

setup-A8/deploy/eglibc/images/beaglebone/

setup-A8

setup-A8 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

setup-A8

setup-A8 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README