CS202-CS214-Computer-Organization-Project

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

CS202-CS214-Computer-Organization-Project

(★ 10)

SUSTech CS202/CS214 Computer Organization Project. Streams Bad Apple.

CS202-CS214-Computer-Organization-Project 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# CS202/CS214 Computer Organization Project

[Video Preview on Bilibili, with Chinese subtitle](https://www.bilibili.com/video/BV12N411n7kf).

## 简介

（~~年轻人第一款可以放视频的CPU~~）计组CPU作业，重新设计的单周期CPU（脱离Lab课件的单独实现），模块化便于流水线改造，同时支持MIPS32指令集中除浮点运算和特权级别/Exception处理的大部分指令。CPU支持UART覆写指令内存和数据内存，便于调试。

MMIO支持读写VGA显存。显存工作在Text Mode下，读写一块大小为2400 Bytes的文本显存，将至多2400个字符线性映射到屏幕上（从左到右，从上到下）。显示驱动在`./src/IO/drivers/output/VGA_drv/`文件夹下。

`./doc/vga_text_mode.md`下包含视频编码规范。视频编码采用简单的基于关键帧与变化帧的压缩，方便使用MIPS汇编直接进行操作解码（项目时间问题，整体工期仅有不到5天，除开上课）。

由于~~不想写DDR3内存适配~~工期原因，选择了采用FPGA片上Block RAM存储视频，故实际可用内存数目仅在400000 Bytes左右，个人选择将其压缩为ASCII码。

`./utils/savf_conv/savf_encoder.py`包含一个能够直接对ASCII视频流编码的软件，输出为Vivado可用的32位宽COE文件。使用`./assembly/video_player.asm`可以对其进行解码，其中的`func_draw_vga_buf`函数用于将栈缓冲区中的视频内容写到VGA显存上。

此外，`./utils/font_gen/bin2coe.py`可被用于转码BIOS使用的字体（`.bin`，bitmap格式）到COE文件供Vivado读取（用作VGA驱动自带显存）。

要实例化这个项目，`git clone`后打开Vivado，在添加源文件时选择添加目录，并将`ip`文件夹（作为RTL文件）`src`文件夹和`constrs`文件夹完全导入即可。

![image-20230603225825658](https://raw.githubusercontent.com/IskXCr/CS202-CS214-Computer-Organization-Project/main/markdown-img/fig2.png)

## Acknowledgements

You can find acknowledgements to the sources of image/video resources and assets used under `./acknowledgements.md`.

## Specification of Custom Formats

You can find the specification of customized formats under `./doc` folder.

## Introduction

In this project, a single-cycle MIPS CPU has been designed and tested. The CPU supports a subset of the MIPS32 ISA (without support for instructions related to exception handling, coprocessor 0 and multiplier/divider).

## CPU Specification

### Overview

![image-20230603210956580](https://raw.githubusercontent.com/IskXCr/CS202-CS214-Computer-Organization-Project/main/markdown-img/spec0.png)

![image-20230603215856268](https://raw.githubusercontent.com/IskXCr/CS202-CS214-Computer-Organization-Project/main/markdown-img/spec1.png)

![image-20230603211025614](https://raw.githubusercontent.com/IskXCr/CS202-CS214-Computer-Organization-Project/main/markdown-img/spec2.png)

![image-20230603222547965](https://raw.githubusercontent.com/IskXCr/CS202-CS214-Computer-Organization-Project/main/markdown-img/spec3.png)

*The 1st one and the 3rd one are flattened.*

**Architecture**: Harvard Architecture.

### List of CPU Submodules

| Module Name         | Module Definition | Description                                                  | I/O  |
| ------------------- | ----------------- | ------------------------------------------------------------ | ---- |
| `ALU_decoder`       | `ALU_dec.sv`      | Decoder parsing instructions into ALU control signals, including `ALU_op`, parameters to control `shift`, unsigned operations, use of signed/unsigned immediate, source of the `ALU` operand. |      |
| `imm_sign_mux`      | `mux2.sv`         | Select between the signed immediate and the unsigned immediate, determined by `use_sign_imm` signal from `ALU_decoder`. |      |
| `ALU_op2_mux`       | `mux2.sv`         | Select the secondary operand of `ALU` between the register value and the immediate, determined by `ALU_sc`. |      |
| `ALU_shift_mux`     | `mux2.sv`         | Select the source for `shift amount` for ALU.  Either from `shamt` field of the instruction, or from `rs`. |      |
| `main_decoder`      | `main_dec.sv`     | Decoding the instruction and set various fields, including `branch`, `branch_comp_zero` (*used in branches that compares to zero but has a different field other than `5'b00000` in `rt`*), `jump`, `jump_dst` (*used if jump to an address specified in a register*), `mem_to_reg`, `mem_write`, `reg_dst` (*select the write address of the register file. Used to select between `rt`, `rd` and `$ra` (used for linking)*), `reg_pc4_src` (*for linking*), `reg_write`, etc. |      |
| `ALU_inst`          | `ALU.sv`          | ALU for processing various kind of operations.               |      |
| `reg_rdata2_mux`    | `mux2.sv`         | Select between `$zero` and `$rt`. Used in branching instructions. |      |
| `reg_waddr_mux`     | `mux3.sv`         | Select between different write addresses. Used in branching, jumping and linking. |      |
| `branch_controller` | `branch_cont.sv`  | Used to control the branch behavior, based on `ALU_lt` and `ALU_eq` which are two ALU facilities for comparing its operands. |      |
| `instr_controller`  | `instr_cont.sv`   | Used to control the instruction flow. Accepts `jump` and `branch` signals, and determine whether to jump/branch according to `main_decoder` and `branch_controller`. `instr_addr` outputs the address of the instruction to fetch, and `pc4` outputs the value of current `PC` +4 (*for linking purposes*). |      |
| `registers`         | `reg_file.sv`     | Register files. Has a reset button to reset contents to their default values. |      |

*For detailed I/O specification on each submodule, please refer to the schematic image. The naming convention is designed to be easy to read.*

### List of Supported Instructions (ISA)

This is a subset of the MIPS32 instruction set. Exclusions are `mul/div` and coprocessor-0-related instructions.

| Type           | Instruction               | Additional Description |
| -------------- | ------------------------- | ---------------------- |
| Logical        | `and rd, rs, rt`          |                        |
|                | `or rd, rs, rt`           |                        |
|                | `xor rd, rs, rt`          |                        |
|                | `nor rd, rs, rt`          |                        |
| Logical-IMM    | `andi rt, rs, immediate`  |                        |
|                | `xori rt, rs, immediate`  |                        |
|                | `lui rt, immediate`       |                        |
|                | `ori rs, rt, immediate`   |                        |
| Shift          | `sll rd, rt, sa`          |                        |
|                | `srl rd, rt, sa`          |                        |
|                | `sra rd, rt, sa`          |                        |
| Shift-R        | `sllv rd, rt, rs`         |                        |
|                | `srlv rd, rt, rs`         |                        |
|                | `srav rd, rt, rs`         |                        |
| Data-Transfer  | `mfhi rd`                 |                        |
|                | `mflo rd`                 |                        |
|                | `mthi rs`                 |                        |
|                | `mtlo rs`                 |                        |
| Arithmetic-R   | `add rd, rs, rt`          |                        |
|                | `addu rd, rs, rt`         |                        |
|                | `sub rd, rs, rt`          |                        |
|                | `subu rd, rs, rt`         |                        |
|                | `slt rd, rs, rt`          |                        |
|                | `sltu rd, rs, rt`         |                        |
|                | `mult rs, rt`             |                        |
|                | `multu rs, rt`            |                        |
|                | `div rs, rt`              |                        |
|                | `divu rs, rt`             |                        |
| Arithmetic-IMM | `addi rt, rs, immediate`  |                        |
|                | `addiu rt, rs, immediate` |                        |
|                | `slti rt, rs, immediate`  |                        |
|                | `sltiu rt, rs, immediate` |                        |
| Jump-R         | `jr rs`                   |                        |
| Jump-R-Link    | `jalr rs`/`jalr rd, rs`   |                        |
| Jump-IMM       | `j target`                |                        |
| Jump-IMM-Link  | `jal target`              |                        |
| Branch         | `beq rs, rt, offset`      |                        |
|                | `bgtz rs, offset`         |                        |
|                | `blez rs, offset`         |                        |
|                | `bne rs, rt, offset`      |                        |
|                | `bltz rs, offset`         |                        |
|                | `bgez rs, offset`         |                        |
| Branch-Link    | `bltzal rs, offset`       |                        |
|                | `bgezal rs, offset`       |                        |
| Load/Store     | `lw rt, offset(base)`     |                        |
|                | `sw rt, offset(base)`     |                        |

### Register Specification

| Register Name | Size        | Description                                                  |
| ------------- | ----------- | ------------------------------------------------------------ |
| GPR           | 32 Words    | General Purpose Register. `$zero` fixed. `$sp` initialized to `0x7fffeffc`. |
| PC            | 1 Word      | Program Counter                                              |
| `hi`/`lo`     | 1 Word Each | Used in `mult`/`div` instructions and `mflo/mfhi/mtlo/mthi` instructions |

### ALU OpCode Table

| Name      | OpCode Hex |
| --------- | ---------- |
| nop       | 0          |
| and       | 1          |
| or        | 2          |
| xor       | 3          |
| nor       | 4          |
| lui       | 5          |
| shift     | 6          |
| add       | 7          |
| sub       | 8          |
| slt       | 9          |
| mult      | A          |
| div       | B          |
| mfhi/mflo | C          |

### ALU Utility Ports

| I/O  | Port Name     | Description                                                  |
| ---- | ------------- | ------------------------------------------------------------ |
| I    | ALU_control   | Accepts ALU OpCode                                           |
| I    | shamt         | Shift amount                                                 |
| I    | shift_dir     | Shift direction                                              |
| I    | shift_ari     | Shift arithmetic (right shift support ONLY)                  |
| I    | do_unsigned   | Do unsigned operations (all operations that requires sign-extension or signed-number comparison) |
| I    | ALU_reg_write | 1 to let ALU write results into `hi`/`lo` register           |
| I    | ALU_reg_sel   | 0 for selecting the `hi` register, `1` for selecting the `lo` register |
| O    | ALU_out       | Result of the ALU operation                                  |
| O    | overflow      | Whether the operation (arithmetic only) results in an overflow |
| O    | ALU_eq        | Whether `op_1 == op_2`                                       |
| O    | ALU_lt        | Whether `op_1 < op_2`                                        |

### Operational Characteristics from Instruction Encoding

| Var                       | Asserted                                               | Not Asserted            |
| ------------------------- | ------------------------------------------------------ | ----------------------- |
| funct[0]                  | do unsigned operation if arithmetic                    |                         |
| funct[0]                  | if shift, do arithmetic shift                          |                         |
| funct[1]                  | if shift, do right shift                               | if shift, do left shift |
| funct[2]                  | if shift, select the shift source as the register `rs` |                         |
| funct                     | if `6'b001000` or `6'b001001`, link `$ra` and jump     |                         |
| funct[0] & funct[5]       | if R-type, do unsigned operation                       |                         |
| op[0]                     | if memory access, access halfword                      |                         |
| op[0]                     | if jump to `instr_index`, link `$ra`                   |                         |
| op[1]                     | word                                                   |                         |
| (op[2] & ~op[3]) \| op[5] | do sign-extension on the immediate                     |                         |
| op[3] \| op[5]            | Select the immediate as the second operand of ALU      |                         |
| op[3] & op[0]             | if I-type, do unsigned operation                       |                         |
| op[3]                     | if memory access, do store                             |                         |
| op[5]                     | memory access                                          |                         |
| rt[5]                     | if branch, link `$ra`                                  |                         |

## Top Specification

### Memory Specification

| Segment | Offset      | ITB? | Boundary    | ITB? | Size        | Source                                     |
| ------- | ----------- | ---- | ----------- | ---- | ----------- | ------------------------------------------ |
| Text    | 0x0040_0000 | Y    | 0x0041_0000 | N    | 16384 Words | Block Memory Generator                     |
| Data    | 0x1001_0000 | Y    | 0x1007_0000 | N    | 98304 Words | Block Memory Generator                     |
| Stack   | 0x7fff_effc | Y    | 0x7ffe_f000 | Y    | 16384 Words | Block Memory Generator                     |
| MMIO    | 0xffff_0000 | Y    | 0xffff_0040 | N    | 16 Words    | Memory-Mapped IO Segment **1**             |
| MMIO    | 0xffff_0100 | Y    | 0xffff_0A60 | N    | 600 Words   | Memory-Mapped IO Segment **2** for **VGA** |

*ITB*: ***Include this boundary***

Block Memory addressing unit: `32 bits`. Truncate 2 bits from the processor to get the actual address inside the block memory.

### MMIO Specification

*MMIO* configuration is tailored to meet the requirements for CS214 Project Inspection.

Pin constraints only work only on *Minisys*.

| Physical Segment Base | R/W Support | Size (Word) | Destination Device | Description |
| --------------------- | ---------- | ---- | ------------------ | ----------- |
| 0xffff_0000 | R/W         | 1 |  | Reserved |
| 0xffff_0004 | R | 1 | SW[23] | `0` if scenario 1. `1` if scenario 2. |
| 0xffff_0008 | R | 1 | SW[22:20] | Testcase number, 3 bits. |
| 0xffff_000c | R | 1 | SW[15:8] | Operand 1. Sign extension according to specific testcases. |
| 0xffff_0010 | R | 1 | SW[7:0] | Operand 2. Sign extension according to specific testcases. |
| 0xffff_0014 | R | 1 | Keypad | Keypad number in hex. Maximum 1 word. |
| 0xffff_0018 | R | 1 | Timer[63:32] | Timer. Increases 1 every cycle, frequency 100 MHz (relies on `data_clk`), bit-width 64. |
| 0xffff_001c | R | 1 | Timer[31:0] | Timer. Increases 1 every cycle, frequency 100 MHz (relies on `data_clk`), bit-width 64. |
| 0xffff_0020 | R/W | 1 | LED[19] | Single LED indicator.                                      |
| 0xffff_0024 | R/W | 1 | LED[18] | Single LED indicator                                       |
| 0xffff_0028 | R/W | 1 | LED[17] | Single LED indicator                                       |
| 0xffff_002c | R/W | 1 | LED[16] | Single LED indicator                                       |
| 0xffff_0030 | R/W | 1 | LED Tube LEFT | 7-seg tube output in hex.                                  |
| 0xffff_0034 | R/W | 1 | LED Tube RIGHT | 7-seg tube output in hex.                                  |
| 0xffff_0038 | R/W | 1 | LED[15:0] | 16 bit LED output.                                         |
| 0xffff_003C | R/W | 1 | Buzzer | Stores the vibrating frequency of the buzzer. |
| 0xffff_0100 | R/W | 600         | VGA | VGA text-mode buffer. |

### VGA Text Mode Specification

| Variable                     | Value   | Description |
| ---------------------------- | ------- | ----------- |
| `text_width`                 | 8       |             |
| `text_height`                | 16      |             |
| `horizontal_character_count` | 80      |             |
| `vertical_character_count`   | 30      |             |
| `total_character_count`      | 2400    |             |
| `colored_output`             | `false` |             |
| `refresh_rate`               | 60 Hz   |             |

### Other IO Devices

Configuration of other IO devices is tailored to meet the requirements for CS214 Project Inspection.

Pin constraints work on **Minisys** platform only.

| Type (I/O) | Name                  | VarName          | Destination Device | Pin  | Description                                                  |
| ---------- | --------------------- | ---------------- | ------------------ | ---- | ------------------------------------------------------------ |
| I          | Clock Signal          | `clk`            | Wire               | Y18  | **Minisys** *built-in clock signal*.                         |
| I          | UART_RX               | `uart_rx_i`      | Wire               | Y19  | UART input                                                   |
| O          | UART_TX               | `uart_tx_o`      | wire               | V18  | UART output                                                  |
| I          | CPU UART Mode Trigger | `uart_trigger`   | Button[3]          |      | If pressed, switch CPU to UART communication mode.           |
| I          | CPU Work Mode Trigger | `work_trigger`   | Button[2]          |      | If pressed, switch CPU to work mode                          |
| I          | Reset                 | `rst`            | Button[4]          |      | If pressed, initial an complete reset that sets CPU to **work** mode, and resets PC and GPRs to their initial values. |
| O          | CPU Mode Indicator    |                  | LED[23]            |      | If `0`, CPU is in UART communication mode. Else, CPU is in work mode. |
| O          | UART_DONE             |                  | LED[22]            |      | UART transmission done indicator.                            |
| O          | UART_WRITE_ENABLE     | `uart_wen`       | LED[21]            |      | UART write-enable signal indicator.                          |
| O          | INSTR_WEN             | `uart_instr_wen` | LED[20]            |      | UART instruction write-enable signal                         |
| O          | DATA_WEN              | `uart_data_wen`  | LED[19]            |      | UART data write-enable signal                                |

### Constraint Specification

Please refer to `constrs/top.xdc`.

## Integrated Tests and Results

### Tests

| Test Suite        | Test Name          | Test Subject                                                 | Result    |
| ----------------- | ------------------ | ------------------------------------------------------------ | --------- |
| SIM_CPU_TEST      | sim_test_1.asm     | Arithmetic and Logical Operations                            | Passed    |
|                   | sim_test_2.asm     | Data Segment and S/W Operations                              | Passed    |
|                   | sim_test_3.asm     | Branch and link instructions, with other stuff               | Passed    |
|                   | sim_test_4.asm     | Interrupt Call and Stack Frame Pointer                       | Cancelled |
|                   | sim_test_5.asm     | slt, sltu                                                    | Passed    |
| UART_TEST         | uart_test_1.asm    | UART communication                                           | Passed    |
| VIDEO_TEST        | video_test_1.asm   | Video memory functionality and VGA driver                    | Passed    |
|                   | video_test_2.asm   | Character set availability                                   | Passed    |
| LOGICAL_TEST      | logical_test_1.asm | `mult`, `div`, `mflo/mfhi/mtlo/mthi` test                    | Passed    |
| IO_TEST           | io_test_1.asm      | 7-seg tube MMIO and CPU status                               | Passed    |
|                   | io_test_2.asm      | 7-seg tube MMIO and MMIO address                             | Passed    |
|                   |                    |                                                              |           |
| VIDEO_PLAYER_TEST | video_player.asm   | CPU **overall functionality** test, including branch, bit operations, encoding/decoding. | Passed    |

### Testcase Walkthrough

All completed.

CS202-CS214-Computer-Organization-Project

CS202-CS214-Computer-Organization-Project 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

CS202-CS214-Computer-Organization-Project

CS202-CS214-Computer-Organization-Project 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README