Cpp-Crypto-Arbitrage-Framework

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

Cpp-Crypto-Arbitrage-Framework

(★ 30)

C++ Framework for Detecting Crypto Currency Arbitrages from Public Exchanges and Data

Cpp-Crypto-Arbitrage-Framework 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

## C++ Crypto Arbitrage Framework
A **C++ dominant framework** for pulling real-time data via public endpoints from six crypto exchanges to **compute a crypto currency arbitrage** that is both mathematically profitable and a proper amount to trade to get realistic profitability. The framework can **detect bilatreal, trilateral, quadliteral, and pentalateral arbitrages** from a single set of crypto currency data.

## Need for Speed, through C++ and Parallelization
Pulling active ticker data and select orderbook data via public API endpoints from all trading pairs across 6 crypto exchanges is about **2.7 MB of JSON string data per pull**. That is about **46.6 GB** of ticker and orderbook data **per day** from only 6 exchanges. This framework downloads active ticker data, parses active ticker data, performs arbitrage finding, formats the arbitrage path, downloads relevant orderbook information, and determines realistic profitability. Most of these **operations are expensive**, time consuming operations that in the end will net a path that is deemed profitable. **If the path takes too long to compute the profitability/trading opportunity may have disappeared.**

For the reason that **speed is royalty** in this situation, **C++ is used on all time dominant operations and** all operations that could have benefited from embarrassingly or **data parallelism** were accommodated. On my own hardware, the **time dominant factor** of this framework **is downloading json data** from public endpoints. Over 99% of time is spent simply downloading ticker and orderbook data, which is both good and bad. Operations acting on operable data are efficient, which makes the framework suffers from outside factors that **can not be avoided without additional hardware or data costs**.

## To Use Framework
Install all libraries*
```sh
$ sudo apt-get install make cmake nlohmann-json3-dev curl python3 pip
```
```sh
$ pip install requests bs4
```
```sh
$ cd Framework
```
```sh
$ bash shell_driver.sh
```

\- **shell_driver.sh** will initializes the framework by building, compiling, and applying user selected options

\* commands given for Linux Debian environment

## Outline

The project is set up into **five** main section crypto ticker data pulling, graph building, arbitrage finding, orderbook data pulling, and trading amount determination

## Arbitrage Finding Algorithm
A Crypto Currency arbitrage refers to the practice of **buying and selling** cryptocurrencies across different exchanges or markets to take advantage of price discrepancies and make a **profit**.

### Math Behind the Algorithm
The mathematical formula for an arbitrage is

$$\text{StartingCapital} \cdot \text{Trade1} \cdot \text{Trade2} \cdot ... \cdot \text{TradeN} > \text{StartingCapital}$$

For numerical stability with floating point operations, the formula can be converted to

$$\ln(\text{StartingCapital}) + \ln(\text{Trade1}) + \ln(\text{Trade2}) + ... + \ln(\text{TradeN}) > \ln(\text{StartingCapital})$$

With trading fees included,

$$\ln(\text{StartingCapital}) + \ln(\text{Trade1}) + \ln(\text{Trade1Fee}) + \ln(\text{Trade2}) + $$

$$\ln(\text{Trade2Fee}) + ... + \ln(\text{TradeN}) + \ln(\text{TradeNFee}) > \ln(\text{StartingCapital}) $$

**Every** set of **Trades** that satisfy this inequality is considered a **profitable arbitrage** by purely ticker data. However, there are many sets of trades with a **profitability** of **less than 0.1%**, which may be ideal for a high frequency traders but are not viable for an average trader

Adding a lower bound profit threshold allows for a certain degree of profitability before a arbitrage path is said to be viable by an individual user,

$$\ln(\text{StartingCapital}) + \ln(\text{Trade1}) + \ln(\text{Trade1Fee}) + ... + \ln(\text{TradeN}) + \ln(\text{TradeNFee}) $$

$$ \geq \ln(\text{StartingCapital}) + \ln(1 + \text{LowerThreshold})$$

- **LowerThreshold** is percentage expressed as a decimal
- An **UpperThreshold** of default 200% profitability is implemented to avoid looping over outdated ticker and orderbook data

### Algorithm and Data Structures Implementation
To find sets of trades that satisfy the equation above, the [arbitrage_finder.hpp](Framework/Header_Files/arbitrage_finder.hpp) implements a brute force path searching algorithm from a given source coin. As every arbitrage path starts and ends with the same coin, **each path is a cycle** within the graph data structure being used.

Within this graph data structure, **each vertex** is a tradable **crypto currency** and **each edge** away from said vertex is a **trading pair** available on some exchange. There may be **multiple edges from one vertex to another** and that equates to a trading pair offered on multiple exchanges. The **end goal** of discovering an arbitrage path is to **complete the trades** in the path **as soon as possible** on relevant exchanges. To do this, a user will end up overspending the average user by placing bids at or above ask price and asks at or below bid price to create the best chance to for automatic order completion. This structure choice makes edge weights in a trading pair the ask price from the start currency to the end currency and bid price for the vice versa.

## Ideal Trading Amount Algorithm
As the **arbitrage** path finding **algorithm** satisfies the mathematical formula described above based on ticker prices, the path falls prey to **discovering** paths that are profitable by ticker data, but the order book **lacks liquidity** to support a similar profitability. The path may be profitable by ticker data but is fruitless without knowing how much one should trade.

The [ideal trading amount algorithm](Framework/Header_Files/amount_optimization.hpp) takes the path found by the arbitrage finding algorithm and **determines an upper bound for a trading amount**. The algorithm will peak into the top-N, N is specified by the user, active trades in the orderbook for each trade in the path. Looking into each of these active trades will allow the **algorithm** to **recognize** trading pairs with **low liquidity** on either the bid or ask side.

The result of this **algorithm will determine a realistic profitability**, the corollary slippage rate from ticker profitability, and the amount of source capital the user should trade.

## Usability and Flexibility

As seen in [framework usage](#to-use-framework), this framework is driven by a [shell script](Framework/shell_driver.sh)

This **shell script generates a user setting file** from user input, if one is not already present. Described below are each setting. Once user settings are generated, the **arbitrage framework can be used freely** and these user settings can be updated at any time. A sample user_setting.txt file is provided [here](Framework/Symbol_Data_Files/user_settings.txt) for reference or if the [generate_user_settings.py](Framework/generate_user_settings.py) proves to cause unintended behavior or is hard to use for a user.

**Parameter: `pathLen`** 
**Type: `Int`** 
Sets the arbitrage path length the [arbitrage finding algorithm](Framework/Header_Files/arbitrage_finder.hpp) will search. In practical terms, set the number of trading pairs in a given arbitrage sequence the framework is allowed to search through. Choice between length 2, 3, 4, or 5.

**Parameter: `startCoin`** 
**Type: `String`** 
Sets the arbitrage path start and end value. Each arbitrage is a cycle in a graph data structure and the startCoin or source coin is the start and end of that cycle. Profitability will be determined based on the starting amount of this coin

**Parameter: `tradeAmt`** 
**Type: `Double`** 
Sets the minimum trading amount value of each trade in an arbitrage path in terms of the **startCoin** currency. All of 6 supported exchanges have a minimum trading amount value for each market order, which equates to roughly 10-20 USDT. By default, the **tradeAmt** is set the value of 20 USDT in the **startCoin** currency the user selects.

**Parameter: `exchangeRemove`** 
**Type: `list[String]`** 
Sets the exchanges the user wishes to remove from data pulling. It is suggested to remove Binance, if using this framework from a US IP Address. Removing exchanges will speed up all operations, but **will decrease** the amount of **possible arbitrages** and potentially **overall profitability**.

**Parameter: `lowerBound`** 
**Type: `Double`** 
Sets the minimum profitability threshold for a arbitrage path to be deemed as profitable. A 0.03 lowerBound refers to a profitability of 3% before an arbitrage path is deemed as profitable.

**Parameter: `coinReq`** 
**Type: `Int`** 
Sets the number of coins to request from the [CoinGecko API](https://www.coingecko.com). An API request is made to retrieve the top **coinReq** by 24hr trading volume using the [request_coingecko_api.py](Framework/Symbol_Data_Files/request_coingecko_api.py) script.

**Parameter: `volReq`** 
**Type: `Double`** 
Sets the minimum 24hr trading volume to request for each coin requested via the [CoinGecko API](https://www.coingecko.com). An API request is made to retrieve the top **coinReq** by 24hr trading volume using the [request_coingecko_api.py](Framework/Symbol_Data_Files/request_coingecko_api.py) script.

**Parameter: `debugMode`** 
**Type: `Int/Boolean`** 
Places the arbitrage framework into debug mode. Facilitates all features of the framework for exactly one successful arbitrage find. Debug mode will print important arbitrage log information such as graph size, arbitrage path information, orderbook parsing, and ideal size finding.

**Parameter: `timeMode`** 
**Type: `Int/Boolean`** 
Places the arbitrage framework into time mode. Facilitates all features of the framework to benchmark the time dominant operations of the framework. These operations include ticker data pulling, arbitrage finding, orderbook pulling, and ideal amount finding.

**Parameter: `orderBookDepth`** 
**Type: `Int`** 
Sets the depth to request from each trading pair orderbook when determining realistic profitability and price slippage in the [ideal trading amount algorithm](Framework/Header_Files/amount_optimization.hpp). The higher the depth the longer each API request will take to generate and download. It is also unlikely that orderbooks will have a large amount of active trades (250+), if it is not a extremely popular trading pair. It is also worth noting that the deeper one looks into an orderbook for potential trading liquidity the more spread one will deal with.

## Exchange Data Pulling
<img width="600" src="https://github.com/jrbjrb1212/Cpp-Crypto-Arbitrage-Framework/blob/main/Framework/ReadMEPics/Parallel_Example.png?raw=true">

Pinging and downloading ticker and orderbook data via public exchange endpoints takes a lot of time that cannot be avoided. Each public endpoint web request will take, between 1 and 3 seconds. To avoid a serial implementation of doing one request after another, the **requests are multithreaded** (assuming multiple threads are available) to reduce the total time to make all endpoint data requests around 3 seconds with the slowest endpoint request being the bottleneck. [API pulling code](Framework/Header_Files/exchange_api_pull.hpp)

This type of exchange data pulling from public api endpoints is freely available via open-source projects such as [ccxt](https://github.com/ccxt/ccxt) and [freqtrade](https://github.com/freqtrade/freqtrade). **I choose six strong exchanges to allow myself the opportunity to learn** to pull and manipulate trading data.

## Possible Next Steps or Different Directions
- Format the data into a matrix and **use k matrix multiplies** to maximize the profitability wit an entry in the result or intermediate matrix being the **argMax** of a row from matrixA and column from matrixB
    - **Reduces arbitrage algorithm complexity** to $O((k+1)*n^{([2.34, 3])})$, where k is the number of desired trades, for larger arbitrage paths and is quite amendable to parallelization
    - **Easy to calculate** but would be **harder to trace** the path from the result
- Along with (k+1) matrix multiplies is the idea of tropical algebra for currency arbitrage outlined in this [paper](https://commons.lib.jmu.edu/cgi/viewcontent.cgi?article=1303&context=honors201019) that uses **more sophisticated mathematical formuli**, such as the kronocker and Karp's Algorithm

- Another option is [Johnson's algorithm](https://en.wikipedia.org/wiki/Johnson%27s_algorithm) or [Floyd-Warshall](https://en.wikipedia.org/wiki/Floyd%E2%80%93Warshall_algorithm) to compute an all-pairs shortest path
    - Both will **yield the greatest possible profitability** for an arbitrage is fed data correctly
    - Both **suffer from tracing profitability** to the actual path as multiple intersecting arbitrage paths in the graph will produce incorrect tracing
    - The shortest path from any given vertex to another does not directly result in a arbitrage path, which would **imply additional required computations**
    - No guarantee that the shortest path from one vertex to another and back is of reasonable length (could have very long trade paths)

- A final option is **linear programming** with a linear solver for both improving the computational speed of the arbitrage finder and amount of optimizer
    - There are **multiple** providers of free/payed **linear solvers** such as Gurobi, MATLAB, HiGHS, or any [others](https://www.researchgate.net/post/What_is_the_best_software_available_for_linear_programming)
    - Constraints could be freely added by used such as certain coins to favor or avoid, path length, minimal or maximal exchanges to make trades on, min or max of trading a coin or set of coins, bias towards coins that have or have not been traded before
    - **Objective function would be the maximization profit** from available trades at any given time 
    - Separate **objective function could be the optimized trading amount** from the parsed orderbook data

- Additionally **before deploying the framework** as an active trading bot, one should consider hooking up the arbitrage paths that the bot finds to a Twilio text message/email bot. The Twilio application could send a user text messages about discovered arbitrage paths and the user could manually check them to recognize potential strengths and weaknesses of this framework. From there, a user can tweak user_settings customization or my code entirely to feel comfortable with the framework before deploying an active trading bot

## Disclaimer and Drawbacks
- This crypto arbitrage framework was done for **personal interest**. It is possible that this framework will output a **false positive path** that **produces financial loss** because of outdated orderbook data so any outside use of this code is at the users discretion and risk 
- **Very few exchanges offer cross exchange trades**, so **keeping balances on all exchanges in use would be required** for the best market order completion speed. Else, one would have transfer funds between exchanges, pay transfer fees, and suffer from a slower execution of an arbitrage path.
    - If trading on multiple exchanges with large enough balances, it is possible for a user to parallelize market order submission by trading each pair independently. If the arbitrage path is profitable at order completion, the result overall will be profitable

Cpp-Crypto-Arbitrage-Framework

Cpp-Crypto-Arbitrage-Framework 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Cpp-Crypto-Arbitrage-Framework

Cpp-Crypto-Arbitrage-Framework 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README