vpxcoding

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 20)

Zero-dependency single-file C header for VPX coding, a form of Arithmetic coding.

vpxcoding 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# vpxcoding single-file-header C library

**WIP Note** - This offshoot has not been battle-hardened, and is subject to change.  Also, hopefully in time there will be more complete, practical examples.

Single file header form of the range coder from [libvpx](https://github.com/webmproject/libvpx) (From the video codec VP8/VP9) as a general purpose compression/decompression of bitstreams algorithm.  [Range Coding](https://en.wikipedia.org/wiki/Range_coding) is a type of [Arithmatic Coding](https://en.wikipedia.org/wiki/Arithmetic_coding), able to offer even better compression than the provably optmal [Huffman Coding](https://en.wikipedia.org/wiki/Huffman_coding) because it can represent symbols using partaial numbers of bits.

The idea of this coding is, given:

1. A bitstream
2. Knowledge about how likely the next bit is to be a 0 or 1 (written as a probability from 0..255)

You can optimally code an output bitstream, with compression better than huffman trees by using arithmetic coding.  Please note this is **not** a replacement for something like lz77, zstd, zlib, etc.  But **is** a replacement for huffman coding.  This ONLY covers optimal symbol expression.  If there is data-similarity that must be compressed by another algorithm.  In general, you will want to get rid of whatever entropy you can before applying this compression technique. I.e. you can't just use this to compress text.  If you are looking for something for that, you may want to consider my [heatshrink single-file-header](https://github.com/cnlohr/heatshrink-sfh).

It's also reaonsably fast. Not great, but not bad.

```
Input  Len: 16777216 bytes
Output Len: 14104056 bytes
Relative Size: 84.07 %
Matching 16777216 bytes
Encode Time:  375.116ms (42.653 MBytes/s)
Decode Time: 537.677ms (29.758 MBytes/s)
```
(on a AMD Ryzen 7 5800X, GCC 11.4.0, -O2)

Also, the code is very small, about 768 bytes each for reading and writing when compiled. (below, using -Os) x64.
```
.rodata	0100 (256 bytes)  vpx_norm           // Table used for both encode and decode

.text	003f (63 bytes)   vpx_start_encode
.text	00e4 (228 bytes)  vpx_write
.text	005e (94 bytes)   vpx_stop_encode

.text	0073 (115 bytes)  vpx_read
.text	00fa (250 bytes)  vpx_reader_fill
.text	003f (35 bytes)   vpx_reader_find_end
.text	0066 (102 bytes)  vpx_reader_init
.text	0016 (22 bytes)   vpx_reader_has_error
```

If you are on a platform that supports `__builtin_clz`, then you may want to define `VPXCODING_NOTABLE` as that will replace the table call with a `clz` and `andi` operation, which may be faster, and use less cache/RAM.  If you are on a RAM constrained system, you may want to do this as well, but see the note in the header file about the manually unwound log2.

In my tests, depending on the application, this seems to be able to save between 1-5% over huffman trees.  But, notably, there are situations where you can use this to much greater effect and simplicity than huffman trees (but not all situations).

## Example

It's very simple, if you have a bitstream you want to encode, you can write something like:

```c
#define VPXCODING_WRITER
#include "vpxcoding.h"

int main()
{
	vpx_writer w;
	uint8_t * bufferO = malloc(2048);
	vpx_start_encode( &w, bufferO, 2048);
	vpx_write(&w, 1, 10 );
	vpx_write(&w, 0, 250);
	vpx_write(&w, 1, 128);
	vpx_stop_encode(&w);

// w.pos contains the # of bytes written into bufferO.
}
```

Or to read, 
```c
#define VPXCODING_READER
#include "vpxcoding.h"

int main()
{
	// Assume a uint8_t* bufferI, and it's length, bufferIlen
	vpx_reader reader;
	int ret = vpx_reader_init(&reader, bufferI, bufferIlen, 0, 0 );

int first =  vpx_read(&reader, 10);  // 1
	int second = vpx_read(&reader, 250); // 0
	int third =  vpx_read(&reader, 128); // 1
}
```

It appears the optimal bit selection is:

```c
	// Higher numbers mean 0 is more likely, 0.5 = equally possible 1 and 0.
	float probability01 = (chance of next bit being 0);
	int probability = probability01 * 257 - 0.5;

// Must bound.  Probability is only a uint8_t
	if( probability > 255 ) probability = 255;
	if( probability < 0 ) probability = 0;
```

NOTE: This is found emperically.  It may not be correct or as-designed.

## More complicated symbols

You can use [probabilitytree.h](probabilitytree.h) to encode symbols.  For instance if you wanted to encode text, you could list out the frequencies of all your letters and call `ProbabilityTreeGenerateProbabilities`.  This creates a table that can be used to encode or decode whole sybmols at a time with `ProbabilityTreeReadSym` and `ProbabilityTreeWriteSym`.

## Overall Properties

![Optimal Compression Ratio](https://github.com/user-attachments/assets/02b9d48f-497c-4633-87b8-42a0e345aeaa)

![Overall](https://github.com/user-attachments/assets/55d98d1d-9fc9-4bb2-a436-16dd0fbc603d)

![Edges](https://github.com/user-attachments/assets/c18f296a-d2af-4d7d-84a3-ef145f01a66c)

![Optimal](https://github.com/user-attachments/assets/d2315457-68a6-460e-aaa2-73ba25c0b0aa)

## TODO
 * Make a variant which uses no data if probability is 0 or 255.

## Special Thanks

Whoever the original author actually was.  At the very least thank you for making sure it's properly licensed.

[@danielrh](https://github.com/danielrh) for alerting me to this, and helping me understand its application outside of libvpx.
 * https://github.com/danielrh/arithmetic_coding_tutorial 
 * https://github.com/danielrh/losslessh264

* This video is a GREAT introduction to Huffman, Arithmetic Coding, And ANS [Better than Huffman](https://www.youtube.com/watch?v=RFWJM8JMXBs)

These two youtube videos were really good, but don't explain this specific implementation.
 * [(IC 5.1) Arithmetic coding - introduction](https://www.youtube.com/watch?v=ouYV3rBtrTI)
 * [(IC 5.2) Arithmetic coding - Example #1](https://www.youtube.com/watch?v=7vfqhoJVwuc)
 * [(IC 5.3) Arithmetic coding - Example #2](https://www.youtube.com/watch?v=CXCWQy9N2ag)
 * [(IC 5.4) Why the interval needs to be completely contained](https://www.youtube.com/watch?v=jHS8-rmEo5k)
 * [(IC 5.5) Rescaling operations for arithmetic coding](https://www.youtube.com/watch?v=t8_198HHSfI)
 * This continues on for 13? episodes?

vpxcoding

vpxcoding 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

vpxcoding

vpxcoding 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README